Počet vydaných publikací
Web of science.
P. Bílý, A. Kapicová, J. Holan (2022) Time-dependent strains of prestressed concrete containment vessels: Validation of analytical model by real-world data.
Engineering Structures, vol. 262, pp. 114403, ISSN 0141-0296.
Holan, J., Novák, J., Müller, P. and Štefan, R. (2020) Experimental Investigation of the Compressive Strength of Normal-strength Air-entrained Concrete at High Temperatures.
Construction & Building Materials, vol. 248, pp. 118662, ISSN 0950-0618.
Štefan, R., Foglar, M., Fládr, J., Horníková, K., and Holan, J. (2020) Thermal, spalling and mechanical behaviour of various types of cementitious composites exposed to fire: Experimental and numerical analysis.
Construction & Building Materials, vol. 262, pp. 119676, ISSN 0950-0618.
Müller, P., Novák, J. and Holan, J. (2019) Destructive and non-destructive experimental investigation of polypropylene fibre reinforced concrete subjected to high temperature.
Journal of Building Engineering, vol. 26, pp. 100906, ISSN 2352-7102.
Holan, J. and Štefan, R. (2020) Numerical analysis of temperature distribution throughout a concrete slab during fire using a web-based solver
In: 26th Concrete Days 2019. Curich: Trans Tech Publications, Solid State Phenomena, vol. 309, pp. 149-156. ISSN 1662-9779.
Holan, J., Novák, J. and Štefan, R. (2019) Air-entrainment as an alternative to polypropylene fibers and its effect on the compressive strength of concrete at high temperatures
In: Fibre Concrete 2019. Bristol: IOP Publishing Ltd, 2019. p. 1-6. IOP Conference Series: Materials Science and Engineering. vol. 596. ISSN 1757-899X. (2019).
Holan, J. and Štefan, R. (2019) Regarding the Interaction Diagram of Reinforced Concrete Cross-Section
In: 25th Concrete Days 2018. Curich: Trans Tech Publications, Solid State Phenomena, vol. 292, pp. 164-172. ISSN 1662-9779.
Holan, J., Novák, J. and Štefan, R. (2020) Provzdušnění betonu jako alternativa k polypropylenovým vláknům a jeho vliv na pevnost v tlaku běžného betonu vystaveného působení vysokých teplot.
BETON-technologie, konstrukce, sanace, ročník 20, sešit 2, ISSN 1213-3116.
J. Holan and R. Štefan (2021) Simplified numerical determination of bending moments in a twoway slab using a web-based application.
In: The 27th International Conference Concrete Days. Curich: Trans Tech Publications, Advances in Science and Technology, vol. 108, pp. 45-52. ISSN 1662-0356.
J. Holan, P. Bílý and R. Štefan (2021) Study of the Underground Placement of a Reinforced Concrete Containment Building.
In: The 27th International Conference Concrete Days. Curich: Trans Tech Publications, Advances in Science and Technology, vol. 108, pp. 35-44. ISSN 1662-0356.
Holan, J. and Štefan, R. (2020) Webová aplikace pro zjednodušené stanovení momentů v obousměrně pnutých deskách
In: Sborník ke konferenci 27. BETONÁŘSKÉ DNY. Praha: ČBS - Česká betonářská společnost ČSSI, ISBN 978-80-907611-3-1.
J. Holan, P. Bílý and R. Štefan (2020) Rešerše podzemního umístění železobetonového kontejnmentu
Holan, J. and Štefan, R. (2019) Numerická analýza rozložení teploty v betonové desce vystavené požáru pomocí webové aplikace.
In: 26. Betonářské dny. Praha: ČBS - Česká betonářská společnost ČSSI, ISBN 978-3-0357-3668-7.
Holan, J. and Štefan, R. (2018) K problematice interakčního diagramu železobetonového průřezu.
In: 25. Betonářské dny. Praha: ČBS - Česká betonářská společnost ČSSI, ISBN 978-80-906759-6-4.
J. Holan (2022) Modely pro výpočet přetvoření betonu za vysokých teplot.
In: Proceedings of PhD Workshop, Department of Concrete and Masonry Structures 2022, Praha: CTU FCE.
J. Holan (2021) Náraz silničního vozidla: opatření pro snížení rizik, výpočetní metody a vzorový příklad.
In: Proceedings of PhD Workshop, Department of Concrete and Masonry Structures 2021, Praha: CTU FCE, ISBN 978-80-01-06842-7.
J. Holan (2020) Webová aplikace pro výpočet rozložení teploty v betonové desce vystavené požáru.
In: Proceedings of PhD Workshop, Department of Concrete and Masonry Structures 2020, Praha: CTU FCE, ISBN 978-80-01-06774-1.
J. Holan (2019) Compressive strength of air-entrained concrete at high temperatures.
In: Proceedings of the 8th PhD Workshop of the Department of Concrete and Masonry Structures, Praha: CTU FCE, ISBN 978-80-01-06574-7.
Holan, J. (2018) Výpočetní program pro analýzu železobetonových sloupů pomocí interakčního diagramu.
In: PhD Workshop 2018, Praha: CTU FCE, ISBN 978-80-01-06417-7.
Holan, J. (2018) Tvorba výpočetní aplikace pro analýzu železobetonových sloupů pomocí interakčního diagramu.
Master's thesis, CTU in Prague, Faculty of Civil Engineering.
Welcome to our wiki! This site is maintained by the Department of Mechanics , Faculty of Civil Engineering , Czech Technical University in Prague . All coworkers and students of the department are invited to share information on various activities and resources related to mechanics (teaching, research, applications, consulting, etc.). The information is arranged according to the following list:
- Conferences - international and national conferences, symposia and workshops
- Courses - intensive courses, typically for graduate students
- Vacancies - open positions in mechanics (e.g. postdocs, researchers, assistant professors)
- Projects - calls for proposals, list of funding agencies
- Seminar - program of the solid mechanics seminar organized by the department
- Meetings - thematic internal meetings focused on research problems solved at the department, organized on an ad-hoc basis
- Defences - BSc, MSc and PhD theses, habilitations
- Alumni - our former colleagues (students or coworkers of the department)
- Media outputs of the department
- Literature - recommendations of useful books and papers
- Software - recommendations of handy software tools
- Life - social life of the department, various events and activities
A special section (in Czech), referred to as the Student's Corner , is intended for undergraduate students (see also the menu on the left). Electronic teaching aids are collected in our Virtual Laboratory of Mechanics . An overview of approaching events can be found in the section entitled Current events (see also the menu on the left). If you have any comments or suggestions, please switch to the Discussion tab (see the top menu with tabs Page / Discussion). Under construction: Creep of concrete
Important news and announcements
- The Academician Bazant Contest 2024 is announced to April 24, 2024 at 9h in B366 .
- Results of Vít Šmilauer presented in the news of Czech Television by the author himself
- Milan Jirásek has been distinguished as one of Top 1% Reviewers in Engineering by Clarivate Publons
- Erasmus+ course on Advanced Master in Structural Analysis of Monuments and Historical Constructions , coordinated at CTU by Petr Kabele , received 2017 European Union Prize for Cultural Heritage / Europa Nostra Award in education, training, and awareness-raising category
Navigation menu
ProbĂhĂĄ ĂşdrĹžba serveru, nÄkterĂŠ strĂĄnky nemusĂ bĂ˝t doÄasnÄ funkÄnĂ.
Äeskăš vysokăš uäenă technickăš, fakulta stavebnă, katedra mechaniky k132.
- ĂÄast (podmĂnky)
- Seznam pĹedmÄtĹŻ
- StrĂĄnky pĹedmÄtĹŻ
- TĂŠmata projektĹŻ
- TĂŠmata zĂĄvÄr. pracĂ
- Informace k SZZ
- StudentskĂĄ ÄĂĄst wiki
- Podpora výuky
- VyrovnĂĄvacĂ kurz
Publikace 2021
Na tĂŠto strĂĄnce najdete seznam vĹĄech publikacĂ na katedĹe v patĹiÄnĂŠm roce. Pokud hledĂĄte publikace pouze konkrĂŠtnĂ osoby, pak je pĹehlednÄji najdete na jejĂ strĂĄnce (via odkaz " LidĂŠ "). Pro detailnÄjĹĄĂ informace vyuĹžijte aplikaci V3S CVUT .
Rok: 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995
- ZĂĄvislost pĹenosu distrakÄnĂ sĂly pĹi procesu prodluĹžovĂĄnĂ dlouhĂ˝ch kostĂ
- A lattice discrete particle model to simulate the viscoelastic behaviour of macro - synthetic fibre reinforced concrete
- PouĹžitelnost MKP simulacĂ pro lĂŠkaĹe v reĂĄlnĂŠm Äase
- Numerical Homogenization of Gyroid Structures
- 12th Conference Nano & Macro Mechanics 2021
- Deformace nesymetricky vysychajĂcĂch betonovĂ˝ch nosnĂkĹŻ
- Stochastic Micro-Modelling of Historic Masonry
- Robust probabilistic calibration of a stochastic lattice discrete particle model for concrete
- Technologie urÄovĂĄnĂ vlivu teplotnĂch Äi dalĹĄĂch zmÄn na pohyby mostnĂch konstrukcĂ souÄasnÄ v podĂŠlnĂŠm i svislĂŠm smÄru pozemnĂ radarovou interferometriĂ.
- WP7 HITEC: Souhrn vĂ˝stupĹŻ ÄeskĂ˝ch stran projektu EURAD
- Experimental dynamic analysis of the arch road bridge
- Podklady pro technickĂ˝ pĹedpis pro posuzovĂĄnĂ vlastnostĂ recyklovanĂŠho kameniva do betonu - navĂĄzanĂ˝ na pĹĂpravu normy pro recyklovanĂŠ kamenivo do betonu
- HPMETR 2021
- HPMEFEL 2021
- HPTRFEL 2021
- Novå metodika pro kvantitativnà hodnocenà povrchů monolitických betonových konstrukcàs pomocà analýzy obrazu
- Mitigation of chloride induced corrosion in reinforced concrete structures and its modeling
- Combined influence of carbonation and leaching on freeze-thaw resistance of limestone ternary cement concrete
- Influence of rock inclusion composition on the fracture response of cement-based composite specimens
- Surface morphology and mechanical properties changes induced in Ti3InC2 (M3AX2) thin nanocrystalline films by irradiation of 100 keV Ne+ ions
- Induratio penis plastica
- Software - Induratio penis plastica
- Numerical and material modelling for the development of a new device for the treatment of Induratio penis plastica
- Efficient inverse solvers for thermal tomography
- Quasicontinuum-inspired modeling of inelastic materials
- Odezva horninovĂŠho masivu pĹi pouĹžitĂ ekvivalentnĂch podmĂnek poruĹĄenĂ v analĂ˝ze MKP
- Overview of the modified magnetoelastic method applicability
- PorovnĂĄnĂ teplotnĂch gradientĹŻ pro analĂ˝zu CB vozovek
- Comprehensive experiments on time-dependent behavior of structural concrete subjected to drying and loading
- SouhrnnĂĄ vĂ˝zkumnĂĄ zprĂĄva o moĹžnostech zvyĹĄovĂĄnĂ vyuĹžitĂ stavebnĂch a demoliÄnĂch odpadĹŻ ve stavebnictvĂ
- OchrannĂ˝ pĹehoz pro bariĂŠru BALBAR (model A)
- SouÄasnĂŠ moĹžnosti zvyĹĄovĂĄnĂ vyuĹžitĂ stavebnĂho a demoliÄnĂho odpadu ve stavebnictvĂ
- Micro-Scale Fracture Properties of Cementitious Composites
- Effect of Magnesium and Cerium on Modification of Carbides in Chromium Cast Iron Grade EXL-1A
- ChytrĂ˝ kontejner na sbÄr stavebnĂho SDK odpadu
- CitiBIM Toolkit
- Micromechanical Parameter Identification Using Bayes Method
- Micromechanical Parameter Identification using the Bayes Method
- Topology optimization of discrete structures by polynomial optimization
- Global minimum-compliance optimization of frames and shells
- Global optimality in minimum compliance topology optimization of frame and shell structures
- MoĹžnosti vyuĹžitĂ jemnĂŠ frakce odpadnĂho betonu v lehÄenĂ˝ch cementovĂ˝ch kompozitech
- DIGITALIZACE A ZEFEKTIVNÄNĂ PROCESĹŽ POVOLOVĂNĂ DOPRAVNĂCH STAVEB
- Classification of Masonâs Skills by Analysis of Selected Churches of the Broumov Group
- The Mechanical Properties and Fatigue Prediction of a New Generation of Osteosynthetis Devices
- Efficient finite difference formulation of a geometrically nonlinear beam element
- Development of composite element joining keel beam and aircraft fuselage
- Revamp of Creep and Shrinkage NU Database
- 29th WORKSHOP OF APPLIED MECHANICS BOOK OF PAPERS
- 29th Workshop of Applied Mechanics
- VyuĹžitĂ dronĹŻ v odpadovĂŠm hospodĂĄĹstvĂ - zamÄĹenĂ deponiĂ a dalĹĄĂ moĹžnosti
- New Long-Life Concrete Pavements in the Czech Republic
- BezpeÄnostnĂ bariĂŠra
- DEFORMACE SYMETRICKY A NESYMETRICKY VYSYCHAJĂCĂCH BETONOVĂCH NOSNĂKĹŽ
- MULTISCALE VISCOELASTIC ANALYSIS OF PLAIN WEAVE TEXTILE COMPOSITES
- Polymer Composites 2021
- POLYMER COMPOSITES 2021 â Proceedings
- GyroidnĂ struktura jako zĂĄkladnĂ konstrukÄnĂ prvek implantĂĄtĹŻ a jejĂ rozmanitost
- NUMERICAL COMPARISON OF TRANSGINGIVAL AND SUBGINGIVAL DENTAL IMPLANTS IN REGARD TO THEIR STRESS DISTRIBUTIONS
- ModelovĂĄnĂ gyroidnĂch struktur pro osteointegraÄnĂ povrchy implantĂĄtĹŻ
- Influence of earth composition on adsorption capacity of methylene blue dye
- Fracture energy of illitic rammed earth with high water-clay ratio
- AUTOMATED BIM ENTITY RECONSTRUCTION FROM UNSTRUCTURED 3D POINTCLOUDS
- Mechanical Response of Explanted Collagen-Nanofiber Composites Intended for Pulmonary Artery Banding
- Akcelerovanå in vitro degradace kalcium fosfåtových cementů
- APPLICATION OF THE MORI-TANAKA METHOD TO DESCRIBE THE RATE-DEPENDENT BEHAVIOR OF UNIDIRECTIONAL FIBROUS COMPOSITES
- Effective elastic and fracture properties of regular and irregular masonry from nonlinear homogenization
- Effects of Gamma-Ray Irradiation on Hardened Cement Mortar
- Prototyp T profilu
- Optimization of tuned mass dampers attached to damped structures - Minimization of maximum displacement and acceleration
- On comparison of 3D isogeometric Timoshenko and Bernoulli beam formulations
- UrÄenĂ tuhosti poruĹĄenĂŠho horninovĂŠho masivu s vyuĹžitĂm DFN modelĹŻ
- Finite element implementation of geometrically nonlinear contact
- Experimental and numerical investigation of the response of GLT beams exposed to fire
- Mechanical properties of spruce wood extracted from glt beams loaded by fire
- Oscillation-free Computation Homogenisation Scheme with Quasilinear Complexity
- Guaranteed two-sided bounds on all eigenvalues of preconditioned elliptic problems
- COMPARING THE HOEK-BROWN AND MOHR-COULOMB FAILURE CRITERIA IN FEM ANALYSIS
- On models of long-term behavior of concrete
- MODELLING OF TIME-DEPENDENT BEHAVIOUR OF PARTICULATE THERMOSET POLYMERS
- BetonovĂĄ smÄs pro samozhutnitelnĂŠ betony
- Towards a Passive Self-Assembling Macroscale Multi-Robot System
- Irregular Opening Arrangements in Masonry Walls: Equivalent Frame and Finite Element Simulations
- Microstructure-informed reduced modes synthesized with Wang tiles and the Generalized Finite Element Method
- A Three-Phase Transport Model for High-Temperature Concrete Simulations Validated with X-ray CT Data
- Thermo â mechanical model of concrete pavement in hardening phasis
- ChovĂĄnĂ divĂĄkĹŻ na montovanĂŠ tribunÄ bÄhem svÄtovĂŠho pohĂĄru v biatlonu
- Global optimality in minimum compliance topology optimization of frames and shells by moment-sum-of-squares hierarchy
- Recommendations of RILEM TC 287-CCS: thermo-chemo-mechanical modelling of massive concrete structures towards cracking risk assessment
- BiomateriĂĄly a jejich povrchy XIV.
- Mechanical Properties of Porous Structures for Dental Implants: Experimental Study and Computational Homogenization
- An analysis of the mechanical properties of porous ceramic foams for bone substitutes during accelerated degradation
- FIRE-PROTECTION WITH ALKALI-ACTIVATED CEMENT BINDER
- Optimum Performance of Axially Compressed Concrete Columns with Multi-spiral Reinforcement
- Confinement Effectiveness Factor for Columns with Circular Cross-section: Design Codes vs. Numerical Modeling
- Comparative study of multiscale computational strategies for materials with discrete microstructures
- FIRE PROTECTION OF STEEL ELEMENTS USING LIGHTWEIGHT HYBRID CEMENT MORTAR
- VyuĹžitĂ minerĂĄlnĂ izolace v obvodovĂŠm plĂĄĹĄti budovy s ohledem na jeho nĂĄslednou recyklaci
- Two-sided guaranteed bounds to individual eigenvalues of preconditioned finite element and finite difference problems
- Size effect on the ultimate drying shrinkage of cement mortar: 1-year experiment and numerical modeling
- Crack control of upstream polder face using calibrated thermo-mechanical simulations
- A comparison of the state of the art models for constitutive modelling of concrete
- Plasma modification of microfibers â application to lightweight cement composite containing recycled concrete
- NUMERICAL SIMULATION OF SLUMP FLOW TEST OF CEMENT PASTE COMPOSITES
- MODELING TIME-DEPENDENT DEFORMATIONS OF CONCRETE MEMBERS SUBJECTED TO SYMMETRIC AND ASYMMETRIC DRYING
- Micronized concrete powder as mircofiller in cement paste: influence on hydration and structure
- Detection of the presence of microorganisms during production of plasterboard
- Increasing the biological resistance of gypsum by means of silver, calcium and copper ions
- Mechanical and chemical activation of blast furnace slag and its influence on the mechanical properties of the resulting cement paste
- NMM 2020 Nano & Macro Mechanics
- The Mechanical Properties and Fatigue Prediction of New Generation of Devices for Osteosynthesis
- TK01030031 - InĹženĂ˝rskĂĄ bariĂŠra 200C - PrĹŻbÄĹžnĂĄ zprĂĄva za rok 2020
- Blind competition on the numerical simulation of steel-fiber-reinforced concrete beams failing in shear
- Correlation of viscosimetry and practical tests of fresh cement paste consistency
- Viscosimetry of cement pastes - Analytical and numerical solutions
- Optical Measurement of Displacements Using Supbixel Image Registration
- Self-healing in cementitious composite containing bacteria and protective polymers at various temperatures
- Robust and Inexpensive Test on Passively Confined Concrete for Efficient Design of Concrete Structures
- Optimum Design of Axially Compressed Concrete Columns with Multi-spiral Reinforcement
- Shrinkage-induced deformations and creep of structural concrete: 1-year measurements and numerical prediction
- Effect of Elevated Temperature on Concrete Structures by Discontinuous Boundary Element Method
- The role of bacterially induced calcite precipitation in self-healing of cement paste
- ZaĹĂzenĂ pro lĂŠÄenĂ Peyronieho nemoci
- Determination of Micromechanical Properties of Cementitious Materials with Self-Healing Agent
- Thermal Model for Timber Fire Exposure with Moving Boundary
- Enhanced massivity index based on evidence from case studies: Towards a robust pre-design assessment of early-age thermal cracking risk and practical recommendations
- Guaranteed Two-Sided Bounds on All Eigenvalues of Preconditioned Diffusion and Elasticity Problems Solved By the Finite Element Method
- Reduced order models of elastic glass plate under low velocity impact
- StĹĂkanĂ˝ beton
- Thermo-mechanical model for concrete pavement
- Modular-topology optimization with Wang tilings: an application to truss structures
- Numerical Modeling of Axially Compressed Circular Concrete Columns
- EVALUATION OF IMPACT OF ELEVATED TEMPERATURES ON YOUNGâS MODULUS OF GLT BEAMS
You are here
Akreditované doktorské studijní programy a obory.
Doktorské studijní programy ČVUT, které navazují na magisterské studium, nabízejí vyšší a náročnější formu vzdělání. Pro tento typ studia je charakteristický individuální přístup ke studentovi, zaměřený na rozvoj jeho vědeckých aktivit. Cílem studila je připravit studenta na jeho další vědeckou kariéru, nebo na jeho vysoce kvalifikované působení v celé řadě dalších povolání. Celé studium probíhá v úzké spolupráci se školitelem a pod dohledem oborové rady.
Standardní délka studia je 3 nebo 4 roky. Studium je zakončeno státní doktorskou zkouškou a obhajobou disertační práce, kterou doktorand prokazuje způsobilost k samostatné tvůrčí vědecké práci. Absolvent doktorského studia získává akademický titul „doktor" (Ph.D.).
Všechny doktorské studijní programy jsou akreditovány MŠMT a jsou v souladu s požadavky boloňského systému evropského vzdělávání.
Pokud se rozhodnete pro doktorské studium na ČVUT, musíte v řádném termínu podat přihlášku ke studiu, doložit potvrzení o úspěšném absolvování odpovídajícího magisterského studijního programu, doklad o zaplacení poplatku a dále splnit podmínky přijímacího řízení vybrané fakulty.
Absolventi doktorského studia na ČVUT se na trhu práce uplatňují ve vyšších manažerských pozicích, nebo v aplikovaném výzkumu. Zpravidla již během studia velmi úzce spolupracují s průmyslovými podniky nebo vědeckými pracovišti. Velice často je jim nabízeno pracovní uplatnění ve špičkových zahraničních podnicích a institucích, neboť naši studenti získávají i velice kvalitní jazykové vzdělání.
Informace o doktorských studijních programech na stránkách jednotlivých fakult a součástí:
- Fakulta stavební (FSv)
- Fakulta strojní (FS)
- Fakulta elektrotechnická (FEL)
- Fakulta jaderná a fyzikálně inženýrská (FJFI)
- Fakulta architektury (FA)
- Fakulta dopravní (FD)
- Fakulta biomedicínského inženýrství (FBMI)
- Fakulta informačních technologií (FIT)
- Kloknerův ústav (KÚ)
Akreditované programy a obory
- Uvedené akreditované studijní programy a obory nemusí být otvírány v každém akademickém roce.
- Bližší informace jsou uvedeny na lokálních stránkách fakult v Podmínkách přijímacího řízení na následující akademický rok.
- Přehled zrušených doktorských studijních programů a oborů, uskutečňovaných v českém jazyce
- Proč studovat na ČVUT?
- Přehled akreditovaných studijních programů a oborů
- Bakalářské v cizím jazyce
- Magisterské
- Magisterské v cizím jazyce
- Doktorské v cizím jazyce
- Dny otevřených dveří
- Kontakty na studijní oddělení fakult
- Přijímací řízení
- Přípravné a vyrovnávací kurzy
- E-přihláška ke studiu
- Uchazeči se specifickými potřebami
- Středoškoláci
- Informace pro studenty
- Legislativa týkající se studia
- Uznávání studia ze zahraničí
- Celoživotní vzdělávání (CŽV) - Kurzy na ČVUT
- Česko-anglická terminologie
- Informace pro studenty z RUS a BLR
- STUDENTI A ZAMĚSTNANCI
S KÝM SPOLUPRACUJEME
Fakulta stavební čvut v praze, studujte s námi.
AKTUÁLNĚ NA FAKULTĚ
Hala roku 2024 – soutěž Fakulty stavební ČVUT pro studenty středních a vysokých škol
Týden betonu 22. – 26. 4. 2024
Technický čtvrtek: EUROVIA CZ
Děkanské volno 28. 3. 2024
Výstava „Miloš Sedláček – VYSOKÝ TLAK, VYSOKÉ NAPĚTÍ“
Mezinárodní den vody na Fakultě stavební ČVUT 2024
Jarní přípravný kurz kreslení
- další aktuality
Výstava „Česká vrcholná gotika v modelech“ v Muzeu Krásná Hora nad Vltavou
- další události
Stavební inženýrství
Specializace – inženýrství životního prostředí.
od 3. ročníku studia
specializace – Konstrukce a dopravní stavby
Specializace – materiálové inženýrství, specializace – pozemní stavby, specializace – požární bezpečnost staveb, specializace – příprava, realizace a provoz staveb, specializace – vodní hospodářství a vodní stavby, architektura a stavitelství, scénické technologie, geodézie a kartografie, management a ekonomika ve stavebnictví, stavitelství.
Příprava, realizace a provoz staveb
Civil engineering
studium pouze v AJ
Budovy a prostředí
Specializace - technická zařízení budov, specializace - stavební fyzika, specializace - inženýrská geodézie, specializace - geomatika, integrální bezpečnost staveb, inteligentní budovy, stavební inženýrství - životní prostředí, stavební inženýrství - konstrukce a dopravní stavby, specializace - inženýrské konstrukce, specializace - dopravní stavby a geotechnika, stavební inženýrství - pozemní stavby, specializace - projektování pozemních staveb, specializace - statika pozemních staveb, stavební inženýrství - materiály a diagnostika staveb, stavební inženýrství - řízení projektů, stavební inženýrství - vodní hospodářství a vodní stavby, stavitelství - příprava, realizace a provoz staveb, civil engineering, buildings and environment, water and environmental engineering, advanced masters in structural analysis of monuments and historical constructions.
studium pouze v CZ
Fyzikální a materiálové inženýrství
studium v CZ nebo AJ
Integrální bezpečnost
Inženýrství životního prostředí, konstrukce a dopravní stavby, matematika ve stavebním inženýrství, pozemní stavby, průmyslové dědictví, stavební management a inženýring, stavební obnova památek, vodní hospodářství a vodní stavby, architecture and sustainable development, studijní programy.
Videa a podcasty – co umíme a co nás baví
Prohlédněte si naší fakultu online
Dynamická analýza kostelních věží v Kutné Hoře a v Církvici
Kalkulačka orientační pojistné hodnoty nemovitostí, lešení jako specifická konstrukce.
- další videa a podcasty studentů a akademiků
Měření následků požáru v Národním parku České Švýcarsko
Rybí přechody, z fakulty stavební čvut v praze profesorkou letectví na prestižní imperial college london.
Za obsah odpovídá: prof. Ing. Jiří Máca, CSc.
České vysoké učení technické v Praze Fakulta stavební
Thákurova 7/2077 166 29 Praha 6 – Dejvice
- +420 224 351 111
- [email protected]
- Kompletní kontakty
- Tiskové zprávy
- Grafický manuál
- PR oddělení
- E-shop propagačních předmětů
SPOJTE SE S NÁMI
- Ochrana osobních údajů
K126 KATEDRA EKONOMIKY A ŘÍZENÍ VE STAVEBNICTVÍ
Ing. Vladimíra Nováková, PhD.
- odborný asistent
místnost: B430 telefon: 22435 5413 e-mail: [email protected]
Dosažené vzdělání
1995-2001 Doktorské studium v oboru Obecná ekonomická teorie a dějiny ekonomických teorií, Vysoká škola báňská – Technická univerzita Ostrava
1986-1991 Fakulta ekonomická, Vysoká škola báňská – Technická univerzita Ostrava (obor Národohospodářství)
1982-1986 Gymnázium Jeseník Doplňkové vzdělání 1995 Studijní pobyt na Univerzitě v Dánsku
1996 Studijní pobyt na John Moores University v Liverpoolu, VB
Nyní odborný asistent Katedry ekonomiky a řízení ve stavebnictví, Fsv, ČVUT v Praze
2006–2015 odborný asistent na Katedře společenských věd, Fsv, ČVUT v Praze
2011-2015 externí pracovník ČVUT, Elektrotechnická fakulta, Katedra ekonomiky, manažerství a humanitních věd
2012-2014 externí pedagog na Zemědělské univerzitě v Praze: vedení seminářů Makro a Mikroekonomie
2011-2015 finanční manažer projektu „Multimediální vzdělávání posluchačů magisterských studijních programů“ financovaného z Evropského sociálního fondu – projektové a finanční řízení, administrativní řízení dotace, příprava a zpracování podkladů pro finanční a technické řízení projektu (monitorovacích, průběžných, závěrečných a jiných zpráv, žádostí o platby, vypořádání připomínkovacích řízení, přehledů, atd.)
2009-2010 koordinátor projektu Vědecké metody pro doktorandy – vedení projektu financovaného z prostředků EU – zajišťování odborné úrovně projektu – přípravné fáze (tvorba osnov, studijních materiálů, příprava webové stránky a E-learningu www.doctorandus.info), ověřovací fáze (školení doktorandů), vedení realizačního týmu, vyhodnocování výsledků projektu, spoluautorství a příprava publikace o vědeckých metodách, atd.
2001 obhajoba doktorské disertační práce v oboru Ekonomie na téma: „Majetek jako investice – jeho role v institucionálním portfoliu penzijních fondů“
1991-1997 asistent na katedře obecné ekonomie (od r. 1992 odborný asistent), specializace: makroekonomie, mikroekonomie, hospodářská politika (Ekonomická fakulta VŠB – TU Ostrava)
1992–1997 Externí pedagog OPF SU Karviná – Hospodářská politika státu, Makro(mikro)ekonomie
konzultační hodiny:
Středa: 16:00 – 16:450
Čtvrtek: 13:00 – 13:45
vyučované předměty:
- 126FIRL , 126STMN , 126YEKP
© 2021 - Katedra ekonomiky a řízení ve stavebnictví
For the first time Rosatom Fuel Division supplied fresh nuclear fuel to the world’s only floating nuclear cogeneration plant in the Arctic
The fuel was supplied to the northernmost town of Russia along the Northern Sea Route.
The first in the history of the power plant refueling, that is, the replacement of spent nuclear fuel with fresh one, is planned to begin before 2024. The manufacturer of nuclear fuel for all Russian nuclear icebreakers, as well as the Akademik Lomonosov FNPP, is Machinery Manufacturing Plant, Joint-Stock Company (MSZ JSC), a company of Rosatom Fuel Company TVEL that is based in Elektrostal, Moscow Region.
The FNPP includes two KLT-40S reactors of the icebreaking type. Unlike convenient ground-based large reactors (that require partial replacement of fuel rods once every 12-18 months), in the case of these reactors, the refueling takes place once every few years and includes unloading of the entire reactor core and loading of fresh fuel into the reactor.
The cores of KLT-40 reactors of the Akademik Lomonosov floating power unit have a number of advantages compared to the reference ones: a cassette core was used for the first time in the history of the unit, which made it possible to increase the fuel energy resource to 3-3.5 years between refuelings, and also reduce the fuel component of the electricity cost by one and a half times. The FNPP operating experience formed the basis for the designs of reactors for nuclear icebreakers of the newest series 22220. Three such icebreakers have been launched by now.
For the first time the power units of the Akademik Lomonosov floating nuclear power plant were connected to the grid in December 2019, and put into commercial operation in May 2020. The supply of nuclear fuel from Elektrostal to Pevek and its loading into the second reactor is planned for 2024. The total power of the Akademik Lomonosov FNPP, supplied to the coastal grid of Pevek without thermal energy consumption on shore, is about 76 MW, being about 44 MW in the maximum thermal power supply mode. The FNPP generated 194 million kWh according to the results of 2023. The population of Pevek is just a little more than 4 thousand, while the FNPP has a potential for supplying electricity to a city with a population of up to 100 thousand people. After the FNPP commissioning two goals were achieved. These include first of all the replacement of the retiring capacities of the Bilibino NPP, which has been operating since 1974, as well as the Chaunskaya TPP, which has already been operating for more than 70 years. Secondly, energy is supplied to the main mining companies in western Chukotka in the Chaun-Bilibino energy hub a large ore and metal cluster, including gold mining companies and projects related to the development of the Baimsk ore zone. In September 2023, a 110 kilovolt power transmission line with a length of 490 kilometers was put into operation, connecting the towns of Pevek and Bilibino. The line increased the reliability of energy supply from the FNPP to both Bilibino consumers and mining companies, the largest of which is the Baimsky GOK. The comprehensive development of the Russian Arctic is a national strategic priority. To increase the NSR traffic is of paramount importance for accomplishment of the tasks set in the field of cargo shipping. This logistics corridor is being developed due regular freight voyages, construction of new nuclear-powered icebreakers and modernization of the relevant infrastructure. Rosatom companies are actively involved in this work. Rosatom Fuel Company TVEL (Rosatom Fuel Division) includes companies fabricating nuclear fuel, converting and enriching uranium, manufacturing gas centrifuges, conducting researches and producing designs. As the only nuclear fuel supplier to Russian NPPs, TVEL supplies fuel for a total of 75 power reactors in 15 countries, for research reactors in nine countries, as well as for propulsion reactors of the Russian nuclear fleet. Every sixth power reactor in the world runs on TVEL fuel. Rosatom Fuel Division is the world’s largest producer of enriched uranium and the leader on the global stable isotope market. The Fuel Division is actively developing new businesses in chemistry, metallurgy, energy storage technologies, 3D printing, digital products, and decommissioning of nuclear facilities. TVEL also includes Rosatom integrators for additive technologies and electricity storage systems. Rosenergoatom, Joint-Stock Company is part of Rosatom Electric Power Division and one of the largest companies in the industry acting as an operator of nuclear power plants. It includes, as its branches, 11 operating NPPs, including the FNPP, the Scientific and Technical Center for Emergency Operations at NPPs, Design and Engineering as well as Technological companies. In total, 37 power units with a total installed capacity of over 29.5 GW are in operation at 11 nuclear power plants in Russia. Machinery Manufacturing Plant, Joint-Stock Company (MSZ JSC, Elektrostal) is one of the world’s largest manufacturers of fuel for nuclear power plants. The company produces fuel assemblies for VVER-440, VVER-1000, RBMK-1000, BN-600,800, VK-50, EGP-6; powders and fuel pellets intended for supply to foreign customers. It also produces nuclear fuel for research reactors. The plant belongs to the TVEL Fuel Company of Rosatom.
Rosatom obtained a license for the first land-based SMR in Russia
On April 21, Rosenergoatom obtained a license issued by Rostekhnadzor to construct the Yakutsk land-based SMR in the Ust-Yansky District of the Republic of Sakha (Yakutia).
ROSATOM and FEDC agree to cooperate in the construction of Russia's first onshore SNPP
ROSATOM and FEDC have signed a cooperation agreement to build Russia's first onshore SNPP in Yakutia.
Rosatom develops nuclear fuel for modernized floating power units
Rosatom has completed the development of nuclear fuel for the RITM-200S small modular reactor designed for the upgraded floating power units.
- Victor Mukhin
Victor M. Mukhin was born in 1946 in the town of Orsk, Russia. In 1970 he graduated the Technological Institute in Leningrad. Victor M. Mukhin was directed to work to the scientific-industrial organization "Neorganika" (Elektrostal, Moscow region) where he is working during 47 years, at present as the head of the laboratory of carbon sorbents. Victor M. Mukhin defended a Ph. D. thesis and a doctoral thesis at the Mendeleev University of Chemical Technology of Russia (in 1979 and 1997 accordingly). Professor of Mendeleev University of Chemical Technology of Russia. Scientific interests: production, investigation and application of active carbons, technological and ecological carbon-adsorptive processes, environmental protection, production of ecologically clean food.
Title : Active carbons as nanoporous materials for solving of environmental problems
Quick links.
- Conference Brochure
- Tentative Program
IMAGES
VIDEO
COMMENTS
Jméno a příjmení Recenzent Stav příspěvku; Ing. Filip Bláha: Ing. Lukáš Boháček: Ing. Adam Froněk: Ing. Zdeněk Hlavsa: Ing. Kateřina Hrdličková
Sborník. PhD_Workshop_2022_Proceedings. Příspěvky. BLÁHA Filip. SHRNUTÍ EXPERIMENTÁLNÍCH MĚŘENÍ BEZSTYKOVÉ KOLEJE. BOHÁČEK Lukáš. ZESILOVÁNÍ DESKOVÝCH KONSTRUKCÍ POMOCÍ UHPC. HLAVSA Zdeněk. VÝROBA BETONU S RECYKLOVANÝM KAMENIVEM V PRAXI.
PhD Workshop, Department of Concrete and Masonry Structures May 20, 2022, Prague _____ WORKSHOP DOKTORANDŮ 2022 Cílem workshopu je umožnit mladým vědeckým pracovníkům prezentovat dosažené výsledky své vědecko-výzkumné činnosti z oblasti betonových a zděných konstrukcí. Pokyny:
Detaily naleznete na portálu rain.fsv.cvut.cz. Our researchers in media (4.08.2022 v 10:45) ... Workshop - 2019; Workshop - 2020; Workshop - 2021; Workshop - 2022; 5th Workshop on soil physics and landscape hydrology - Desná 2023 ... The main focus is on of the actual scientific outcomes presented mostly by the phd students working on various ...
PHD WORKSHOP 2024 — PAPER TEMPLATE Markéta Sedláckˇ ová, ∗ Department of Concrete and Masonry Structures, Faculty of Civil Engineering, Czech Technical University in Prague, Thakurova 7/2077, 166 29 Prague 6, Czech Republic. [email protected] ABSTRAKT The abstract has to be clearly written in the range from 100 to
PhD Workshop, Department of Concrete and Masonry Structures. Prezentace ve formě posteru: Poster ve formátu A0. Pro poster není žádná oficiální šablona, je možno zvolit vlastní vzhled posteru. Prosíme pouze o dodržení formátu posteru (A0). Účast všech doktorandů v prezenční i kombinované formě doktorského studia je povinná!
HORÁKOVÁ, A. a A. KOHOUTKOVÁ. Emise CO2 z výroby železobetonových prvků - Citlivostní analýza. In: HORÁKOVÁ, A. a M. PETŘÍK, eds. Proceedings of PhD Workshop, Department of Concrete and Masonry Structures 2021. 10th PhD Workshop of the Department of Concrete and Masonry Structures 2021, Praha, 2021-05-21. Praha: ČVUT FSv.
PHD WORKSHOP 2020 — PAPER TEMPLATE Markéta Sedláckˇ ová, Department of Concrete and Masonry Structures, Faculty of Civil Engineering, Czech Technical University in Prague, Thakurova 7/2077, 166 29 Prague 6, Czech Republic. [email protected] ABSTRAKT The abstract has to be clearly written in the range from 100 to 140 words and ...
Ing. Kamil Seidl. studied Structural and Transportation Engineering at the Faculty of Civil Engineering in Prague. He successfully graduated in 2011 from a socalled double-degree programme, which is based on the an agreement between CTU in Prague and École des Ponts - Paris TechTECH (ENCP). Students of CTU in Prague can enroll in the Civil ...
In: PhD Workshop 2018, Praha: CTU FCE, ISBN 978-80-01-06417-7. Holan, J. (2018) Tvorba výpočetní aplikace pro analýzu železobetonových sloupů pomocí interakčního diagramu. Master's thesis, CTU in Prague, Faculty of Civil Engineering.
[email protected] ABSTRAKT Zatímco je velká část současného výzkumu v oblasti betonu zaměřena na reologické změny a betony speciálních vlastností (vláknobetony, vysokohodnotné betony), zůstávají stranou pozornosti nedostatky analytického modelu pro jeden ze základních typů namáhání - kroucení.
4nd Workshop on soil physics and landscape hydrology Desn a (Jizera Mountains) - 12.10. to 13.10.2023 Topic and scope Presentation of the actual scienti c outcomes presented mostly by the phd students working on various research projects related to soil physics and hydrology. Covered topics will be: transport of water and solutes
The workshop will be held in English as also foreign phd students are anticipated. Location 2nd Workshop on soil physics and landscape hydrology will be held in Desn a in Jizera Mountains in Scout Mountain Base Desn a (Map). Organization David Zumr Ing. Ph.D. ([email protected] ), Petr Kavka Ing. Ph.D., Martin Neumann Ing., Jakub Je r abek ...
The Faculty Departments combine top research capacities with practice and ensure the transfer of scientific knowledge. Our experts are the authors of numerous patents and modern technical solutions. The Faculty comprises 24 Departments and 3 autonomous Research Institutes employing more than 450 academic and research staff members.
Conferences - international and national conferences, symposia and workshops; Courses - intensive courses, typically for graduate students; Vacancies - open positions in mechanics (e.g. postdocs, researchers, assistant professors) Projects - calls for proposals, list of funding agencies
PhD Thesis. CTU FCE. Department of Mechanics. Supervised by M. JIRÁSEK. 2021 ... Padovec, Z. org. - Kubášová, K. org. [Workshop Hosting] 2021. 2021 Využití dronů v odpadovém hospodářství - zaměření deponií a další možnosti; ... — K132 FSv CVUT — ...
Fakulta stavební (FSv) Fakulta strojní (FS) Fakulta elektrotechnická (FEL) Fakulta jaderná a fyzikálně inženýrská (FJFI) Fakulta architektury (FA) Fakulta dopravní (FD) Fakulta biomedicínského inženýrství (FBMI) Fakulta informačních technologií (FIT) Kloknerův ústav (KÚ) Akreditované programy a obory
Hala roku 2024 - soutěž Fakulty stavební ČVUT pro studenty středních a vysokých škol. Týden betonu. 22. - 26. 4. 2024. 03.04.2024.
Vladimíra Nováková, PhD. odborný asistent; místnost: B430 telefon: 22435 5413 e-mail: [email protected]. bio: Dosažené vzdělání ... Fsv, ČVUT v Praze. 2006-2015 odborný asistent na Katedře společenských věd, Fsv, ČVUT v Praze ...
Peer-rewieved journal "Izvestiya. Ferrous Metallurgy" ("Izvestiya vuzov. Chernaya metallurgiya")
21 April 2023 Rosatom obtained a license for the first land-based SMR in Russia. On April 21, Rosenergoatom obtained a license issued by Rostekhnadzor to construct the Yakutsk land-based SMR in the Ust-Yansky District of the Republic of Sakha (Yakutia).
Catalysis Conference is a networking event covering all topics in catalysis, chemistry, chemical engineering and technology during October 19-21, 2017 in Las Vegas, USA. Well noted as well attended meeting among all other annual catalysis conferences 2018, chemical engineering conferences 2018 and chemistry webinars.
Catalysis Conference is a networking event covering all topics in catalysis, chemistry, chemical engineering and technology during October 19-21, 2017 in Las Vegas, USA. Well noted as well attended meeting among all other annual catalysis conferences 2018, chemical engineering conferences 2018 and chemistry webinars.