layout of a scientific research paper

How to Format a Scientific Paper

#scribendiinc

Written by  Joanna Kimmerly-Smith

You've done the research. You've carefully recorded your lab results and compiled a list of relevant sources. You've even written a draft of your scientific, technical, or medical paper, hoping to get published in a reputable journal. But how do you format your paper to ensure that every detail is correct? If you're a scientific researcher or co-author looking to get your research published, read on to find out how to format your paper.

While it's true that you'll eventually need to tailor your research for your target journal, which will provide specific author guidelines for formatting the paper (see, for example, author guidelines for publications by Elsevier , PLOS ONE , and  mBio ), there are some formatting rules that are useful to know for your initial draft. This article will explore some of the formatting rules that apply to all scientific writing, helping you to follow the correct order of sections ( IMRaD ), understand the requirements of each section, find resources for standard terminology and units of measurement, and prepare your scientific paper for publication.

Format Overview

The four main elements of a scientific paper can be represented by the acronym IMRaD: introduction, methods, results, and discussion. Other sections, along with a suggested length,* are listed in the table below.

* Length guidelines are taken from https://www.elsevier.com/connect/11-steps-to-structuring-a-science-paper-editors-will-take-seriously#step6 .

Now, let's go through the main sections you might have to prepare to format your paper.

On the first page of the paper, you must present the title of the paper along with the authors' names, institutional affiliations, and contact information. The corresponding author(s) (i.e., the one[s] who will be in contact with the reviewers) must be specified, usually with a footnote or an asterisk (*), and their full contact details (e.g., email address and phone number) must be provided. For example:

Dr. Clara A. Bell 1, * and Dr. Scott C. Smith 2

1 University of Areopagitica, Department of Biology, Sometown, Somecountry

2 Leviathan University, Department of Biochemistry and Biomedical Sciences, Sometown, Somecountry

*[email protected]

FORMATTING TIPS:

• If you are unsure of how to classify author roles (i.e., who did what), guidelines are available online. For example, American Geophysical Union (AGU) journals now recommend using Contributor Roles Taxonomy (CRediT), an online taxonomy for author contributions.

In this summary of your research, you must state your subject (i.e., what you did) and encapsulate the main findings and conclusions of your paper.

• Do not add citations in an abstract (the reader might not be able to access your reference list).
• Avoid using acronyms and abbreviations in the abstract, as the reader may not be familiar with them. Use full terms instead.

Below the abstract, include a list of key terms to help other researchers locate your study. Note that "keywords" is one word (with no space) and is followed by a colon:

Keywords : paper format, scientific writing.

• Check whether "Keywords" should be italicized and whether each term should be capitalized.
• Check the use of punctuation (e.g., commas versus semicolons, the use of the period at the end).
• Some journals (e.g., IEEE ) provide a taxonomy of keywords. This aids in the classification of your research.

Introduction

This is the reader's first impression of your paper, so it should be clear and concise. Include relevant background information on your topic, using in-text citations as necessary. Report new developments in the field, and state how your research fills gaps in the existing research. Focus on the specific problem you are addressing, along with its possible solutions, and outline the limitations of your study. You can also include a research question, hypothesis, and/or objectives at the end of this section.

• Organize your information from broad to narrow (general to particular). However, don't start too broad; keep the information relevant.
• You can use in-text citations in this section to situate your research within the body of literature.

This is the part of your paper that explains how the research was done. You should relate your research procedures in a clear, logical order (i.e., the order in which you conducted the research) so that other researchers can reproduce your results. Simply refer to the established methods you used, but describe any procedures that are original to your study in more detail.

• Identify the specific instruments you used in your research by including the manufacturer’s name and location in parentheses.
• Stay consistent with the order in which information is presented (e.g., quantity, temperature, stirring speed, refrigeration period).

Now that you've explained how you gathered your research, you've got to report what you actually found. In this section, outline the main findings of your research. You need not include too many details, particularly if you are using tables and figures. While writing this section, be consistent and use the smallest number of words necessary to convey your statistics.

• Use appendices or supplementary materials if you have too much data.
• Use headings to help the reader follow along, particularly if your data are repetitive (but check whether your style guide allows you to use them).

In this section, you interpret your findings for the reader in relation to previous research and the literature as a whole. Present your general conclusions, including an assessment of the strengths and weaknesses of the research and the implications of your findings. Resolve the hypothesis and/or research question you identified in the introduction.

• Use in-text citations to support your discussion.
• Do not repeat the information you presented in the results or the introduction unless it is necessary for a discussion of the overall implications of the research.

This section is sometimes included in the last paragraph of the discussion. Explain how your research fits within your field of study, and identify areas for future research.

• Keep this section short.

Acknowledgments

Write a brief paragraph giving credit to any institution responsible for funding the study (e.g., through a fellowship or grant) and any individual(s) who contributed to the manuscript (e.g., technical advisors or editors).

• Check whether your journal uses standard identifiers for funding agencies (e.g., Elsevier's Funder Registry ).

Conflicts of Interest/Originality Statement

Some journals require a statement attesting that your research is original and that you have no conflicts of interest (i.e., ulterior motives or ways in which you could benefit from the publication of your research). This section only needs to be a sentence or two long.

Here you list citation information for each source you used (i.e., author names, date of publication, title of paper/chapter, title of journal/book, and publisher name and location). The list of references can be in alphabetical order (author–date style of citation) or in the order in which the sources are presented in the paper (numbered citations). Follow your style guide; if no guidelines are provided, choose a citation format and be consistent .

• While doing your final proofread, ensure that the reference list entries are consistent with the in-text citations (i.e., no missing or conflicting information).
• Many citation styles use a hanging indent and may be alphabetized. Use the styles in Microsoft Word to aid you in citation format.
• Use EndNote , Mendeley , Zotero , RefWorks , or another similar reference manager to create, store, and utilize bibliographic information.

Appendix/Supplementary Information

In this optional section, you can present nonessential information that further clarifies a point without burdening the body of the paper. That is, if you have too much data to fit in a (relatively) short research paper, move anything that's not essential to this section.

• Note that this section is uncommon in published papers. Before submission, check whether your journal allows for supplementary data, and don't put any essential information in this section.

Beyond IMRaD: Formatting the Details

Aside from the overall format of your paper, there are still other details to watch out for. The sections below cover how to present your terminology, equations, tables and figures, measurements, and statistics consistently based on the conventions of scientific writing.

Terminology

Stay consistent with the terms you use. Generally, short forms can be used once the full term has been introduced:

• full terms versus acronyms (e.g., deoxyribonucleic acid versus DNA);
• English names versus Greek letters (e.g., alpha versus α); and
• species names versus short forms (e.g., Staphylococcus aureus versus S. aureus ).

One way to ensure consistency is to use standard scientific terminology. You can refer to the following resources, but if you're not sure which guidelines are preferred, check with your target journal.

• For gene classification, use GeneCards , The Mouse Genome Informatics Database , and/or genenames.org .
• For chemical nomenclature, refer to the International Union of Pure and Applied Chemistry (IUPAC) Compendium of Chemical Terminology (the Gold Book ) and the  IUPAC–IUB Combined Commission on Biochemical Nomenclature .
• For marine species names, use the World Register of Marine Species (WoRMS) or the European Register of Marine Species (ERMS) .

Italics must be used correctly for scientific terminology. Here are a couple of formatting tips:

• Species names, which are usually in Greek or Latin, are italicized (e.g., Staphylococcus aureus ).
• Genes are italicized, but proteins aren't.

Whether in mathematical, scientific, or technical papers, equations follow a conventional format. Here are some tips for formatting your calculations:

• Number each equation you present in the text, inserting the number in parentheses.

X + Y = 1                                                                                                                                               (1)

• Check whether your target journal requires you to capitalize the word "Equation" or use parentheses for the equation number when you refer to equations within the text.

In Equation 1, X represents . . .

In equation (1), X represents . . .

(Note also that you should use italics for variables.)

• Try using MathType or Equation Editor in Microsoft Word to type your equations, but use Unicode characters when typing single variables or mathematical operators (e.g., x, ≥, or ±) in running text. This makes it easier to edit your text and format your equations before publication.
• In line with the above tip, remember to save your math equations as editable text and not as images in case changes need to be made before publication.

Tables and Figures

Do you have any tables, graphs, or images in your research? If so, you should become familiar with the rules for referring to tables and figures in your scientific paper. Some examples are presented below.

• Capitalize the titles of specific tables and figures when you refer to them in the text (e.g., "see Table 3"; "in Figure 4").
• In tables, stay consistent with the use of title case (i.e., Capitalizing Each Word) and sentence case (i.e., Capitalizing the first word).
• In figure captions, stay consistent with the use of punctuation, italics, and capitalization. For example:

Figure 1. Classification of author roles.

Figure 2: taxonomy of paper keywords

Measurements

Although every journal has slightly different formatting guidelines, most agree that the gold standard for units of measurement is the International System of Units (SI) . Wherever possible, use the SI. Here are some other tips for formatting units of measurement:

• Add spaces before units of measurement. For example, 2.5 mL not 2.5mL.
• Be consistent with your units of measure (especially date and time). For example, 3 hours or 3 h.

When presenting statistical information, you must provide enough specific information to accurately describe the relationships among your data. Nothing is more frustrating to a reviewer than vague sentences about a variable being significant without any supporting details. The author guidelines for the journal Nature recommend that the following be included for statistical testing: the name of each statistical analysis, along with its n value; an explanation of why the test was used and what is being compared; and the specific alpha levels and P values for each test.

Angel Borja, writing for Elsevier publications, described the statistical rules for article formatting as follows:

• Indicate the statistical tests used with all relevant parameters.
• Use mean and standard deviation to report normally distributed data.
• Use median and interpercentile range to report skewed data.
• For numbers, use two significant digits unless more precision is necessary.
• Never use percentages for very small samples.

Remember, you must be prepared to justify your findings and conclusions, and one of the best ways to do this is through factual accuracy and the acknowledgment of opposing interpretations, data, and/or points of view.

Even though you may not look forward to the process of formatting your research paper, it's important to present your findings clearly, consistently, and professionally. With the right paper format, your chances of publication increase, and your research will be more likely to make an impact in your field. Don't underestimate the details. They are the backbone of scientific writing and research.

One last tip: Before you submit your research, consider using our academic editing service for expert help with paper formatting, editing, and proofreading. We can tailor your paper to specific journal guidelines at your request.

Image source: 85Fifteen/ Unsplash.com

Let Us Format Your Paper to Your Target Journal’s Guidelines

Hire an expert academic editor , or get a free sample, about the author.

Joanna's passion for English literature (proven by her M.A. thesis on Jane Austen) is matched by her passion to help others with their writing (shown by her role as an in-house editor with Scribendi). She enjoys lively discussions about plot, character, and nerdy TV shows with her husband, and she loves singing almost as much as she loves reading. Isn't music another language after all?

Have You Read?

"The Complete Beginner's Guide to Academic Writing"

Related Posts

APA Style and APA Formatting

How to Research a Term Paper

13.1 Formatting a Research Paper

Learning objectives.

• Identify the major components of a research paper written using American Psychological Association (APA) style.
• Apply general APA style and formatting conventions in a research paper.

In this chapter, you will learn how to use APA style , the documentation and formatting style followed by the American Psychological Association, as well as MLA style , from the Modern Language Association. There are a few major formatting styles used in academic texts, including AMA, Chicago, and Turabian:

• AMA (American Medical Association) for medicine, health, and biological sciences
• APA (American Psychological Association) for education, psychology, and the social sciences
• Chicago—a common style used in everyday publications like magazines, newspapers, and books
• MLA (Modern Language Association) for English, literature, arts, and humanities
• Turabian—another common style designed for its universal application across all subjects and disciplines

While all the formatting and citation styles have their own use and applications, in this chapter we focus our attention on the two styles you are most likely to use in your academic studies: APA and MLA.

If you find that the rules of proper source documentation are difficult to keep straight, you are not alone. Writing a good research paper is, in and of itself, a major intellectual challenge. Having to follow detailed citation and formatting guidelines as well may seem like just one more task to add to an already-too-long list of requirements.

Following these guidelines, however, serves several important purposes. First, it signals to your readers that your paper should be taken seriously as a student’s contribution to a given academic or professional field; it is the literary equivalent of wearing a tailored suit to a job interview. Second, it shows that you respect other people’s work enough to give them proper credit for it. Finally, it helps your reader find additional materials if he or she wishes to learn more about your topic.

Furthermore, producing a letter-perfect APA-style paper need not be burdensome. Yes, it requires careful attention to detail. However, you can simplify the process if you keep these broad guidelines in mind:

• Work ahead whenever you can. Chapter 11 “Writing from Research: What Will I Learn?” includes tips for keeping track of your sources early in the research process, which will save time later on.
• Get it right the first time. Apply APA guidelines as you write, so you will not have much to correct during the editing stage. Again, putting in a little extra time early on can save time later.
• Use the resources available to you. In addition to the guidelines provided in this chapter, you may wish to consult the APA website at http://www.apa.org or the Purdue University Online Writing lab at http://owl.english.purdue.edu , which regularly updates its online style guidelines.

General Formatting Guidelines

This chapter provides detailed guidelines for using the citation and formatting conventions developed by the American Psychological Association, or APA. Writers in disciplines as diverse as astrophysics, biology, psychology, and education follow APA style. The major components of a paper written in APA style are listed in the following box.

These are the major components of an APA-style paper:

Body, which includes the following:

• Headings and, if necessary, subheadings to organize the content
• In-text citations of research sources
• References page

All these components must be saved in one document, not as separate documents.

The title page of your paper includes the following information:

• Title of the paper
• Author’s name
• Name of the institution with which the author is affiliated
• Header at the top of the page with the paper title (in capital letters) and the page number (If the title is lengthy, you may use a shortened form of it in the header.)

List the first three elements in the order given in the previous list, centered about one third of the way down from the top of the page. Use the headers and footers tool of your word-processing program to add the header, with the title text at the left and the page number in the upper-right corner. Your title page should look like the following example.

The next page of your paper provides an abstract , or brief summary of your findings. An abstract does not need to be provided in every paper, but an abstract should be used in papers that include a hypothesis. A good abstract is concise—about one hundred fifty to two hundred fifty words—and is written in an objective, impersonal style. Your writing voice will not be as apparent here as in the body of your paper. When writing the abstract, take a just-the-facts approach, and summarize your research question and your findings in a few sentences.

In Chapter 12 “Writing a Research Paper” , you read a paper written by a student named Jorge, who researched the effectiveness of low-carbohydrate diets. Read Jorge’s abstract. Note how it sums up the major ideas in his paper without going into excessive detail.

Write an abstract summarizing your paper. Briefly introduce the topic, state your findings, and sum up what conclusions you can draw from your research. Use the word count feature of your word-processing program to make sure your abstract does not exceed one hundred fifty words.

Depending on your field of study, you may sometimes write research papers that present extensive primary research, such as your own experiment or survey. In your abstract, summarize your research question and your findings, and briefly indicate how your study relates to prior research in the field.

Margins, Pagination, and Headings

APA style requirements also address specific formatting concerns, such as margins, pagination, and heading styles, within the body of the paper. Review the following APA guidelines.

Use these general guidelines to format the paper:

• Set the top, bottom, and side margins of your paper at 1 inch.
• Use double-spaced text throughout your paper.
• Use a standard font, such as Times New Roman or Arial, in a legible size (10- to 12-point).
• Use continuous pagination throughout the paper, including the title page and the references section. Page numbers appear flush right within your header.
• Section headings and subsection headings within the body of your paper use different types of formatting depending on the level of information you are presenting. Additional details from Jorge’s paper are provided.

Begin formatting the final draft of your paper according to APA guidelines. You may work with an existing document or set up a new document if you choose. Include the following:

• Your title page
• The abstract you created in Note 13.8 “Exercise 1”
• Correct headers and page numbers for your title page and abstract

APA style uses section headings to organize information, making it easy for the reader to follow the writer’s train of thought and to know immediately what major topics are covered. Depending on the length and complexity of the paper, its major sections may also be divided into subsections, sub-subsections, and so on. These smaller sections, in turn, use different heading styles to indicate different levels of information. In essence, you are using headings to create a hierarchy of information.

The following heading styles used in APA formatting are listed in order of greatest to least importance:

• Section headings use centered, boldface type. Headings use title case, with important words in the heading capitalized.
• Subsection headings use left-aligned, boldface type. Headings use title case.
• The third level uses left-aligned, indented, boldface type. Headings use a capital letter only for the first word, and they end in a period.
• The fourth level follows the same style used for the previous level, but the headings are boldfaced and italicized.
• The fifth level follows the same style used for the previous level, but the headings are italicized and not boldfaced.

Visually, the hierarchy of information is organized as indicated in Table 13.1 “Section Headings” .

Table 13.1 Section Headings

A college research paper may not use all the heading levels shown in Table 13.1 “Section Headings” , but you are likely to encounter them in academic journal articles that use APA style. For a brief paper, you may find that level 1 headings suffice. Longer or more complex papers may need level 2 headings or other lower-level headings to organize information clearly. Use your outline to craft your major section headings and determine whether any subtopics are substantial enough to require additional levels of headings.

Working with the document you developed in Note 13.11 “Exercise 2” , begin setting up the heading structure of the final draft of your research paper according to APA guidelines. Include your title and at least two to three major section headings, and follow the formatting guidelines provided above. If your major sections should be broken into subsections, add those headings as well. Use your outline to help you.

Because Jorge used only level 1 headings, his Exercise 3 would look like the following:

Citation Guidelines

In-text citations.

Throughout the body of your paper, include a citation whenever you quote or paraphrase material from your research sources. As you learned in Chapter 11 “Writing from Research: What Will I Learn?” , the purpose of citations is twofold: to give credit to others for their ideas and to allow your reader to follow up and learn more about the topic if desired. Your in-text citations provide basic information about your source; each source you cite will have a longer entry in the references section that provides more detailed information.

In-text citations must provide the name of the author or authors and the year the source was published. (When a given source does not list an individual author, you may provide the source title or the name of the organization that published the material instead.) When directly quoting a source, it is also required that you include the page number where the quote appears in your citation.

This information may be included within the sentence or in a parenthetical reference at the end of the sentence, as in these examples.

Epstein (2010) points out that “junk food cannot be considered addictive in the same way that we think of psychoactive drugs as addictive” (p. 137).

Here, the writer names the source author when introducing the quote and provides the publication date in parentheses after the author’s name. The page number appears in parentheses after the closing quotation marks and before the period that ends the sentence.

Addiction researchers caution that “junk food cannot be considered addictive in the same way that we think of psychoactive drugs as addictive” (Epstein, 2010, p. 137).

Here, the writer provides a parenthetical citation at the end of the sentence that includes the author’s name, the year of publication, and the page number separated by commas. Again, the parenthetical citation is placed after the closing quotation marks and before the period at the end of the sentence.

As noted in the book Junk Food, Junk Science (Epstein, 2010, p. 137), “junk food cannot be considered addictive in the same way that we think of psychoactive drugs as addictive.”

Here, the writer chose to mention the source title in the sentence (an optional piece of information to include) and followed the title with a parenthetical citation. Note that the parenthetical citation is placed before the comma that signals the end of the introductory phrase.

David Epstein’s book Junk Food, Junk Science (2010) pointed out that “junk food cannot be considered addictive in the same way that we think of psychoactive drugs as addictive” (p. 137).

Another variation is to introduce the author and the source title in your sentence and include the publication date and page number in parentheses within the sentence or at the end of the sentence. As long as you have included the essential information, you can choose the option that works best for that particular sentence and source.

Citing a book with a single author is usually a straightforward task. Of course, your research may require that you cite many other types of sources, such as books or articles with more than one author or sources with no individual author listed. You may also need to cite sources available in both print and online and nonprint sources, such as websites and personal interviews. Chapter 13 “APA and MLA Documentation and Formatting” , Section 13.2 “Citing and Referencing Techniques” and Section 13.3 “Creating a References Section” provide extensive guidelines for citing a variety of source types.

Writing at Work

APA is just one of several different styles with its own guidelines for documentation, formatting, and language usage. Depending on your field of interest, you may be exposed to additional styles, such as the following:

• MLA style. Determined by the Modern Languages Association and used for papers in literature, languages, and other disciplines in the humanities.
• Chicago style. Outlined in the Chicago Manual of Style and sometimes used for papers in the humanities and the sciences; many professional organizations use this style for publications as well.
• Associated Press (AP) style. Used by professional journalists.

References List

The brief citations included in the body of your paper correspond to the more detailed citations provided at the end of the paper in the references section. In-text citations provide basic information—the author’s name, the publication date, and the page number if necessary—while the references section provides more extensive bibliographical information. Again, this information allows your reader to follow up on the sources you cited and do additional reading about the topic if desired.

The specific format of entries in the list of references varies slightly for different source types, but the entries generally include the following information:

• The name(s) of the author(s) or institution that wrote the source
• The year of publication and, where applicable, the exact date of publication
• The full title of the source
• For books, the city of publication
• For articles or essays, the name of the periodical or book in which the article or essay appears
• For magazine and journal articles, the volume number, issue number, and pages where the article appears
• For sources on the web, the URL where the source is located

The references page is double spaced and lists entries in alphabetical order by the author’s last name. If an entry continues for more than one line, the second line and each subsequent line are indented five spaces. Review the following example. ( Chapter 13 “APA and MLA Documentation and Formatting” , Section 13.3 “Creating a References Section” provides extensive guidelines for formatting reference entries for different types of sources.)

In APA style, book and article titles are formatted in sentence case, not title case. Sentence case means that only the first word is capitalized, along with any proper nouns.

Key Takeaways

• Following proper citation and formatting guidelines helps writers ensure that their work will be taken seriously, give proper credit to other authors for their work, and provide valuable information to readers.
• Working ahead and taking care to cite sources correctly the first time are ways writers can save time during the editing stage of writing a research paper.
• APA papers usually include an abstract that concisely summarizes the paper.
• APA papers use a specific headings structure to provide a clear hierarchy of information.
• In APA papers, in-text citations usually include the name(s) of the author(s) and the year of publication.
• In-text citations correspond to entries in the references section, which provide detailed bibliographical information about a source.

Writing for Success Copyright © 2015 by University of Minnesota is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License , except where otherwise noted.

This document originally came from the Journal of Mammalogy courtesy of Dr. Ronald Barry, a former editor of the journal.

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

• View all journals
• Explore content
• About the journal
• Publish with us
• Sign up for alerts
• CAREER BRIEF
• 08 May 2019

Toolkit: How to write a great paper

A clear format will ensure that your research paper is understood by your readers. Follow:

1. Context — your introduction

2. Content — your results

3. Conclusion — your discussion

Plan your paper carefully and decide where each point will sit within the framework before you begin writing.

Collection: Careers toolkit

Straightforward writing

Scientific writing should always aim to be A, B and C: Accurate, Brief, and Clear. Never choose a long word when a short one will do. Use simple language to communicate your results. Always aim to distill your message down into the simplest sentence possible.

Choose a title

A carefully conceived title will communicate the single core message of your research paper. It should be D, E, F: Declarative, Engaging and Focused.

Conclusions

Add a sentence or two at the end of your concluding statement that sets out your plans for further research. What is next for you or others working in your field?

Find out more

See additional information .

doi: https://doi.org/10.1038/d41586-019-01362-9

Related Articles

How to get published in high impact journals

So you’re writing a paper

Writing for a Nature journal

Deadly diseases and inflatable suits: how I found my niche in virology research

Spotlight 17 APR 24

How young people benefit from Swiss apprenticeships

I dive for fish in the longest freshwater lake in the world

Female academics need more support — in China as elsewhere

Correspondence 16 APR 24

FACULTY POSITION IN PATHOLOGY RESEARCH

Dallas, Texas (US)

The University of Texas Southwestern Medical Center (UT Southwestern Medical Center)

Postdoc Fellow / Senior Scientist

The Yakoub and Sulzer labs at Harvard Medical School-Brigham and Women’s Hospital and Columbia University

Boston, Massachusetts (US)

Harvard Medical School and Brigham and Women's Hospital

Postdoc in Computational Genomics – Machine Learning for Multi-Omics Profiling of Cancer Evolution

Computational Postdoc - Artificial Intelligence in Oncology and Regulatory Genomics and Cancer Evolution at the DKFZ - limited to 2 years

Heidelberg, Baden-Württemberg (DE)

German Cancer Research Center in the Helmholtz Association (DKFZ)

Computational Postdoc

The German Cancer Research Center is the largest biomedical research institution in Germany.

PhD / PostDoc Medical bioinformatics (m/f/d)

The Institute of Medical Bioinformatics and Systems Medicine / University of Freiburg is looking for a PhD/PostDoc Medical bioinformatics (m/w/d)

Freiburg im Breisgau, Baden-Württemberg (DE)

University of Freiburg

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Quick links

• Explore articles by subject
• Guide to authors
• Editorial policies

How to format a research paper

Last updated

7 February 2023

Reviewed by

Miroslav Damyanov

Writing a research paper can be daunting if you’re not experienced with the process. Getting the proper format is one of the most challenging aspects of the task. Reviewers will immediately dismiss a paper that doesn't comply with standard formatting, regardless of the valuable content it contains. 

In this article, we'll delve into the essential characteristics of a research paper, including the proper formatting.

Make research less tedious

Dovetail streamlines research to help you uncover and share actionable insights

• What is a research paper?

A research paper is a document that provides a thorough analysis of a topic , usually for an academic institution or professional organization. A research paper may be of any length, but they are typically 2,000–10,000 words. 

Unlike less formal papers, such as articles or essays, empirical evidence and data are key to research papers. In addition to students handing in papers, scientists, attorneys, medical researchers, and independent scholars may need to produce research papers.

People typically write research papers to prove a particular point or make an argument. This could support or disprove a theoretical point, legal case, scientific theory, or an existing piece of research on any topic. 

One of the distinguishing characteristics of research papers is that they contain citations to prior research. Citing sources using the correct format is essential for creating a legitimate research paper. 

• Top considerations for writing a research paper

To write a research paper, you must consider several factors. Fields such as the sciences, humanities, and technical professions have certain criteria for writing research papers. 

You’ll write a research paper using one of several types of formatting. These include APA, MLA, and CMOS styles, which we’ll cover in detail to guide you on citations and other formatting rules. 

Specific requirements of the assignment

If the paper is for a college, university, or any specific organization, they’ll give you certain requirements, such as the range of topics, length, and formatting requirements.

You should study the specifics of the assignment carefully, as these will override more general guidelines you may find elsewhere. If you're writing for a particular professor, they may ask for single or double spacing or a certain citation style. 

• Components of a research paper

Here are the basic steps to writing a quality research paper, assuming you've chosen your topic and considered the requirements of the paper. Depending on the specific conditions of the paper you're writing, you may need the following elements:

Thesis statement

The thesis statement provides a blueprint for the paper. It conveys the theme and purpose of the paper. It also informs you and readers what your paper will argue and the type of research it will contain. As you write the paper, you can refer to the thesis statement to help you decide whether or not to include certain items.

Most research papers require an abstract as well as a thesis. While the thesis is a short (usually a single sentence) summary of the work, an abstract contains more detail. Many papers use the IMRaD structure for the abstract, especially in scientific fields. This consists of four elements:

Introduction : Summarize the purpose of the paper

Methods : Describe the research methods (e.g., collecting data , interviews , field research)

Results: Summarize your conclusions.  

Discussion: Discuss the implications of your research. Mention any significant limitations to your approach and suggest areas for further research.

The thesis and abstract come at the beginning of a paper, but you should write them after completing the paper. This approach ensures a clear idea of your main topic and argument, which can evolve as you write the paper.

Table of contents

Like most nonfiction books, a research paper usually includes a table of contents. 

Tables, charts, and illustrations

If your paper contains multiple tables, charts, illustrations, or other graphics, you can create a list of these. 

Works cited or reference page

This page lists all the works you cited in your paper. For MLA and APA styles, you will use in-text citations in the body of the paper. For Chicago (CMOS) style, you'll use footnotes. 

Bibliography

While you use a reference page to note all cited papers, a bibliography lists all the works you consulted in your research, even if you don't specifically cite them. 

While references are essential, a bibliography is optional but usually advisable to demonstrate the breadth of your research.

Dedication and acknowledgments

You may include a dedication or acknowledgments at the beginning of the paper directly after the title page and before the abstract.

• Steps for writing a research paper

These are the most critical steps for researching, writing, and formatting a research paper:

Create an outline

The outline is not part of the published paper; it’s for your use. An outline makes it easier to structure the paper, ensuring you include all necessary points and research. 

Here you can list all topics and subtopics that will support your argument. When doing your research, you can refer to the outline to ensure you include everything. 

Gather research

Solid research is the hallmark of a research paper. In addition to accumulating research, you need to present it clearly. However, gathering research is one of the first tasks. If you compile each piece of research correctly, it will be easier to format the paper correctly. You want to avoid having to go back and look up information constantly.

Start by skimming potentially useful sources and putting them aside for later use. Reading each source thoroughly at this stage will be time-consuming and slow your progress. You can thoroughly review the sources to decide what to include and discard later. At this stage, note essential information such as names, dates, page numbers, and website links. Citing sources will be easier when you’ve written all the information down.

Be aware of the quality of your sources. A research paper should reference scholarly, academic, or scientific journals. It’s vital to understand the difference between primary and secondary sources. 

A primary source is an original, firsthand account of a topic. A secondary source is someone else covering the topic, as in a popular article or interview. While you may include secondary sources, your paper should also include primary research . Online research can be convenient, but you need to be extra careful when assessing the quality of your sources.

Write the first draft

Create a first draft where you put together all your research and address the topic described in your thesis and abstract. 

Edit and format the paper

Proofread, edit, and make any necessary adjustments and improvements to the first draft. List your citations as described below. Ensure your thesis and abstract describe your research accurately. 

• Formatting a research paper: MLA, APA, and CMOS styles

There are several popular formats for research papers: MLA (Modern Language Association) and APA (American Psychological Association). Certain academic papers use CMOS (Chicago Manual of Style). Other formats may apply to particular fields. 

For example, medical research may use AMA (American Medical Association) formatting and IEEE (Institute of Electrical and Electronics Engineers) for particular technical papers. The following are the guidelines and examples of the most popular formats:

The humanities typically use MLA format, including literature, history, and culture. Look over examples of papers created in MLA format . Here are the main rules to keep in mind:

Double-spaced lines.

Indent new paragraphs 1/2 inch.

Title case for headings, where all major words are capitalized, as in "How to Write a Research Paper." 

Use a popular font such as Times New Roman. This applies to all formatting styles.

Use one-inch margins on all sides. 

Number sections of the paper using Arabic numerals (1, 2, 3, etc.). 

Use a running head for each page on the upper right-hand corner, which consists of your last name and the page number.

Use an in-text citation within the text, using the author's last name followed by the page number: "Anything worth dying for is certainly worth living for" (Heller 155).  

On the citations page, list the full name, book or periodical, and other information. For MLA, you will not need footnotes, only in-text citations.

List citations in alphabetical order on a separate page at the end of the paper entitled “Works Cited.” 

Continuing with the above example from Heller, the listing would be: Heller, Joseph. Catch-22, Simon & Schuster, 1961.

For a periodical, the format is "Thompson, Hunter S. "The Kentucky Derby is Decadent and Depraved" Scanlon's, June 1970."

Use title case for source titles, as in "On the Origin of Species."

The sciences typically use APA format, including physical sciences such as physics and social sciences such as psychology. Simply Psychology provides examples of APA formatting . The following are the most important rules of the APA format.

Begin the paper with a title page, which is not required for MLA.

Use double-line spacing.

Use a running head for each page in the upper right-hand corner, which consists of the paper's title in capital letters followed by the page number.

The citations page at the end should be titled "References."

In-text citations should include the publication date: (Smith, 1999, p. 50). Note also that there's a "p" for "page," whereas in MLA, you write the page number without a "p."

As with MLA, use title case for headings, as in "Most Popular Treatments for Cognitive Disorders."

Use sentence case for titles of sources, as in "History of the decline and fall of the Roman empire." Note "Roman" starts with a capital because it's a proper noun.  

When citing in-text references, use the author's last name and the first and middle initials. 

Always use the Oxford comma. This comma goes before the words "or" and "and" in a list. For example, "At the store, I bought oranges, paper towels, and pasta."

CMOS formatting

Book publishers and many academic papers use CMOS formatting based on the Chicago Manual of Style. CMOS is also called Turabian, named after Kate L. Turabian, who wrote the first manual for this style. Here are examples of CMOS style formatting and citations.

Include an unnumbered title page.

Place page numbers on the upper right-hand corner of the page. Do not list your name or the paper's title as you would for MLA or APA styles.

Use title case for both headings and sources (same as MLA).

Unlike MLA and APA, the Chicago style uses footnotes for citations. Use a superscript for footnotes: "Smith argues against Jones' theory¹.” Footnotes may appear at the bottom of the page or the end of the document.  

CMOS supports both short notes and full notes. In most cases, you'll use the full note: "Michael Pollan, The Omnivore's Dilemma: A Natural History of Four Meals (New York: Penguin, 2006), 76." For further references to the same source, use a short note: " Pollan, Omnivore's Dilemma, 45." The requirements of some papers may specify using only short notes for all footnotes.

• General guidelines for writing and formatting research papers

Keep these guidelines in mind for all types of research papers:

Initial formatting

As you create your first draft, don't worry about formatting. If you try to format it perfectly as you write the paper, it will be difficult to progress and develop a flow of thought. With the first draft, you don't have to be concerned about ordering the sections. You can rearrange headings and sections later. 

Citation tools

Use automation tools for citations . Some useful tools make citations easier by automatically generating a citation list and bibliography. Many work with APA, MLA, and CMOS styles.

Check for plagiarism

Use a plagiarism detector to make sure your paper isn't unintentionally plagiarizing. There are many free and paid plagiarism checkers online, such as Grammarly. 

Proofread your work

Do several rounds of editing and proofreading. Editing is necessary for any type of writing, but you’ll need to revisit several distinct areas with a research paper:

Check for spelling and grammatical errors.

Read the paper to make sure it's well-argued and that you’ve organized it properly. 

Check that you’ve correctly formatted citations. It's easy to make errors, such as incorrect numbering of footnotes (e.g., Chicago style) or forgetting to include a source on your citations page.

Get started today

Go from raw data to valuable insights with a flexible research platform

Editor’s picks

Last updated: 21 December 2023

Last updated: 16 December 2023

Last updated: 6 October 2023

Last updated: 5 March 2024

Last updated: 25 November 2023

Last updated: 15 February 2024

Last updated: 11 March 2024

Last updated: 12 December 2023

Last updated: 6 March 2024

Last updated: 10 April 2023

Last updated: 20 December 2023

Latest articles

Related topics, log in or sign up.

Get started for free

Structure of a Research Paper

Structure of a Research Paper: IMRaD Format

I. The Title Page

• Title: Tells the reader what to expect in the paper.
• Author(s): Most papers are written by one or two primary authors. The remaining authors have reviewed the work and/or aided in study design or data analysis (International Committee of Medical Editors, 1997). Check the Instructions to Authors for the target journal for specifics about authorship.
• Keywords [according to the journal]
• Corresponding Author: Full name and affiliation for the primary contact author for persons who have questions about the research.
• Financial & Equipment Support [if needed]: Specific information about organizations, agencies, or companies that supported the research.
• Conflicts of Interest [if needed]: List and explain any conflicts of interest.

II. Abstract: “Structured abstract” has become the standard for research papers (introduction, objective, methods, results and conclusions), while reviews, case reports and other articles have non-structured abstracts. The abstract should be a summary/synopsis of the paper.

III. Introduction: The “why did you do the study”; setting the scene or laying the foundation or background for the paper.

IV. Methods: The “how did you do the study.” Describe the --

• Context and setting of the study
• Specify the study design
• Population (patients, etc. if applicable)
• Sampling strategy
• Intervention (if applicable)
• Identify the main study variables
• Data collection instruments and procedures
• Outline analysis methods

V. Results: The “what did you find” --

• Report on data collection and/or recruitment
• Participants (demographic, clinical condition, etc.)
• Present key findings with respect to the central research question
• Secondary findings (secondary outcomes, subgroup analyses, etc.)

VI. Discussion: Place for interpreting the results

• Main findings of the study
• Discuss the main results with reference to previous research
• Policy and practice implications of the results
• Strengths and limitations of the study

VII. Conclusions: [occasionally optional or not required]. Do not reiterate the data or discussion. Can state hunches, inferences or speculations. Offer perspectives for future work.

VIII. Acknowledgements: Names people who contributed to the work, but did not contribute sufficiently to earn authorship. You must have permission from any individuals mentioned in the acknowledgements sections. 

IX. References:  Complete citations for any articles or other materials referenced in the text of the article.

• IMRD Cheatsheet (Carnegie Mellon) pdf.
• Adewasi, D. (2021 June 14).  What Is IMRaD? IMRaD Format in Simple Terms! . Scientific-editing.info. 
• Nair, P.K.R., Nair, V.D. (2014). Organization of a Research Paper: The IMRAD Format. In: Scientific Writing and Communication in Agriculture and Natural Resources. Springer, Cham. https://doi.org/10.1007/978-3-319-03101-9_2
• Sollaci, L. B., & Pereira, M. G. (2004). The introduction, methods, results, and discussion (IMRAD) structure: a fifty-year survey.   Journal of the Medical Library Association : JMLA ,  92 (3), 364–367.
• Cuschieri, S., Grech, V., & Savona-Ventura, C. (2019). WASP (Write a Scientific Paper): Structuring a scientific paper.   Early human development ,  128 , 114–117. https://doi.org/10.1016/j.earlhumdev.2018.09.011

WRITING A SCIENTIFIC RESEARCH ARTICLE | Format for the paper | Edit your paper! | Useful books | FORMAT FOR THE PAPER Scientific research articles provide a method for scientists to communicate with other scientists about the results of their research. A standard format is used for these articles, in which the author presents the research in an orderly, logical manner. This doesn't necessarily reflect the order in which you did or thought about the work.  This format is: | Title | Authors | Introduction | Materials and Methods | Results (with Tables and Figures ) | Discussion | Acknowledgments | Literature Cited | TITLE Make your title specific enough to describe the contents of the paper, but not so technical that only specialists will understand. The title should be appropriate for the intended audience. The title usually describes the subject matter of the article: Effect of Smoking on Academic Performance" Sometimes a title that summarizes the results is more effective: Students Who Smoke Get Lower Grades" AUTHORS 1. The person who did the work and wrote the paper is generally listed as the first author of a research paper. 2. For published articles, other people who made substantial contributions to the work are also listed as authors. Ask your mentor's permission before including his/her name as co-author. ABSTRACT 1. An abstract, or summary, is published together with a research article, giving the reader a "preview" of what's to come. Such abstracts may also be published separately in bibliographical sources, such as Biologic al Abstracts. They allow other scientists to quickly scan the large scientific literature, and decide which articles they want to read in depth. The abstract should be a little less technical than the article itself; you don't want to dissuade your potent ial audience from reading your paper. 2. Your abstract should be one paragraph, of 100-250 words, which summarizes the purpose, methods, results and conclusions of the paper. 3. It is not easy to include all this information in just a few words. Start by writing a summary that includes whatever you think is important, and then gradually prune it down to size by removing unnecessary words, while still retaini ng the necessary concepts. 3. Don't use abbreviations or citations in the abstract. It should be able to stand alone without any footnotes. INTRODUCTION What question did you ask in your experiment? Why is it interesting? The introduction summarizes the relevant literature so that the reader will understand why you were interested in the question you asked. One to fo ur paragraphs should be enough. End with a sentence explaining the specific question you asked in this experiment. MATERIALS AND METHODS 1. How did you answer this question? There should be enough information here to allow another scientist to repeat your experiment. Look at other papers that have been published in your field to get some idea of what is included in this section. 2. If you had a complicated protocol, it may helpful to include a diagram, table or flowchart to explain the methods you used. 3. Do not put results in this section. You may, however, include preliminary results that were used to design the main experiment that you are reporting on. ("In a preliminary study, I observed the owls for one week, and found that 73 % of their locomotor activity occurred during the night, and so I conducted all subsequent experiments between 11 pm and 6 am.") 4. Mention relevant ethical considerations. If you used human subjects, did they consent to participate. If you used animals, what measures did you take to minimize pain? RESULTS 1. This is where you present the results you've gotten. Use graphs and tables if appropriate, but also summarize your main findings in the text. Do NOT discuss the results or speculate as to why something happened; t hat goes in th e Discussion. 2. You don't necessarily have to include all the data you've gotten during the semester. This isn't a diary. 3. Use appropriate methods of showing data. Don't try to manipulate the data to make it look like you did more than you actually did. "The drug cured 1/3 of the infected mice, another 1/3 were not affected, and the third mouse got away." TABLES AND GRAPHS 1. If you present your data in a table or graph, include a title describing what's in the table ("Enzyme activity at various temperatures", not "My results".) For graphs, you should also label the x and y axes. 2. Don't use a table or graph just to be "fancy". If you can summarize the information in one sentence, then a table or graph is not necessary. DISCUSSION 1. Highlight the most significant results, but don't just repeat what you've written in the Results section. How do these results relate to the original question? Do the data support your hypothesis? Are your results consistent with what other investigators have reported? If your results were unexpected, try to explain why. Is there another way to interpret your results? What further research would be necessary to answer the questions raised by your results? How do y our results fit into the big picture? 2. End with a one-sentence summary of your conclusion, emphasizing why it is relevant. ACKNOWLEDGMENTS This section is optional. You can thank those who either helped with the experiments, or made other important contributions, such as discussing the protocol, commenting on the manuscript, or buying you pizza. REFERENCES (LITERATURE CITED) There are several possible ways to organize this section. Here is one commonly used way: 1. In the text, cite the literature in the appropriate places: Scarlet (1990) thought that the gene was present only in yeast, but it has since been identified in the platypus (Indigo and Mauve, 1994) and wombat (Magenta, et al., 1995). 2. In the References section list citations in alphabetical order. Indigo, A. C., and Mauve, B. E. 1994. Queer place for qwerty: gene isolation from the platypus. Science 275, 1213-1214. Magenta, S. T., Sepia, X., and Turquoise, U. 1995. Wombat genetics. In: Widiculous Wombats, Violet, Q., ed. New York: Columbia University Press. p 123-145. Scarlet, S.L. 1990. Isolation of qwerty gene from S. cerevisae. Journal of Unusual Results 36, 26-31.   EDIT YOUR PAPER!!! "In my writing, I average about ten pages a day. Unfortunately, they're all the same page." Michael Alley, The Craft of Scientific Writing A major part of any writing assignment consists of re-writing. Write accurately Scientific writing must be accurate. Although writing instructors may tell you not to use the same word twice in a sentence, it's okay for scientific writing, which must be accurate. (A student who tried not to repeat the word "hamster" produced this confusing sentence: "When I put the hamster in a cage with the other animals, the little mammals began to play.") Make sure you say what you mean. Instead of: The rats were injected with the drug. (sounds like a syringe was filled with drug and ground-up rats and both were injected together) Write: I injected the drug into the rat.

• Be careful with commonly confused words:

Temperature has an effect on the reaction. Temperature affects the reaction.

I used solutions in various concentrations. (The solutions were 5 mg/ml, 10 mg/ml, and 15 mg/ml) I used solutions in varying concentrations. (The concentrations I used changed; sometimes they were 5 mg/ml, other times they were 15 mg/ml.)

 Less food (can't count numbers of food) Fewer animals (can count numbers of animals)

A large amount of food (can't count them) A large number of animals (can count them)

The erythrocytes, which are in the blood, contain hemoglobin. The erythrocytes that are in the blood contain hemoglobin. (Wrong. This sentence implies that there are erythrocytes elsewhere that don't contain hemoglobin.)

Write clearly

1. Write at a level that's appropriate for your audience.

"Like a pigeon, something to admire as long as it isn't over your head." Anonymous

 2. Use the active voice. It's clearer and more concise than the passive voice.

 Instead of: An increased appetite was manifested by the rats and an increase in body weight was measured. Write: The rats ate more and gained weight.

 3. Use the first person.

 Instead of: It is thought Write: I think

 Instead of: The samples were analyzed Write: I analyzed the samples

 4. Avoid dangling participles.

 "After incubating at 30 degrees C, we examined the petri plates." (You must've been pretty warm in there.)

  Write succinctly

 1. Use verbs instead of abstract nouns

 Instead of: take into consideration Write: consider

 2. Use strong verbs instead of "to be"

 Instead of: The enzyme was found to be the active agent in catalyzing... Write: The enzyme catalyzed...

 3. Use short words.

Instead of: Write: possess have sufficient enough utilize use demonstrate show assistance help terminate end

4. Use concise terms.

 Instead of: Write: prior to before due to the fact that because in a considerable number of cases often the vast majority of most during the time that when in close proximity to near it has long been known that I'm too lazy to look up the reference

5. Use short sentences. A sentence made of more than 40 words should probably be rewritten as two sentences.

 "The conjunction 'and' commonly serves to indicate that the writer's mind still functions even when no signs of the phenomenon are noticeable." Rudolf Virchow, 1928

Check your grammar, spelling and punctuation

1. Use a spellchecker, but be aware that they don't catch all mistakes.

 "When we consider the animal as a hole,..." Student's paper

 2. Your spellchecker may not recognize scientific terms. For the correct spelling, try Biotech's Life Science Dictionary or one of the technical dictionaries on the reference shelf in the Biology or Health Sciences libraries.

 3. Don't, use, unnecessary, commas.

 4. Proofread carefully to see if you any words out.

USEFUL BOOKS

Victoria E. McMillan, Writing Papers in the Biological Sciences , Bedford Books, Boston, 1997 The best. On sale for about $18 at Labyrinth Books, 112th Street. On reserve in Biology Library

Jan A. Pechenik, A Short Guide to Writing About Biology , Boston: Little, Brown, 1987

Harrison W. Ambrose, III & Katharine Peckham Ambrose, A Handbook of Biological Investigation , 4th edition, Hunter Textbooks Inc, Winston-Salem, 1987 Particularly useful if you need to use statistics to analyze your data. Copy on Reference shelf in Biology Library.

Robert S. Day, How to Write and Publish a Scientific Paper , 4th edition, Oryx Press, Phoenix, 1994. Earlier editions also good. A bit more advanced, intended for those writing papers for publication. Fun to read. Several copies available in Columbia libraries.

William Strunk, Jr. and E. B. White, The Elements of Style , 3rd ed. Macmillan, New York, 1987. Several copies available in Columbia libraries.  Strunk's first edition is available on-line.

• Free Materials
• English Language Editing
• Technical Scientific Editing
• Scientific Writing Workshops
• Online courses
• Meet the Team

Scientific paper structure: get started with this quick and easy guide

• by kayciebutler
• November 13, 2020 November 13, 2020

Why the scientific paper structure? It mimics the research process!

Science can be daunting enough – the scientific paper structure doesn’t have to be, too!

In fact, the structure of a scientific paper is meant to be anything but daunting, as it is designed to mimic how science actually progresses.

Don’t believe me? Think about this –

–>Research usually starts with a topic ( title ) .

–>Then, you need to study the s tate of the field around that topic, identify key gaps to address, and form a hypotheses ( introduction ).

–>Next, you gather the tools and equipment you need to do that research ( materials ) and perform experiments ( methods ).

–>After that, you report the results of those experiments ( results ) and see how those results affect the field and integrate back into it ( discussion ).

Helpfully, that is also exactly how your scientific paper is structured.

A scientific research paper is typically ordered:

• Introduction
• Materials and Methods
• Discussion/Conclusions

*Note: This page is going to walk you though the scientific paper structure. If you want info on writing each of these sections, please see my comprehensive page on writing your scientific manuscript !

Scientific paper structure: IMRAD and scope

In more technical terms, the scientific paper is usually structured in what we call the IMRAD format, standing for “ I ntroduction, M ethods, R esults A nd D iscussion.”

An IMRAD-based paper includes:

I ntroduction

•    Why did you do this research?
•   What was the original hypothesis?
•   When, where, and how did you do this research?
•   What materials or subjects were involved?
•   What did you discover?
•   Was the tested hypothesis true?

a nd D iscussion

•   What do your results mean?
•   How does this fit within the field?
•   What are the future  prospectives ?

Besides mimicking the research process, the structure of an IMRAD paper is also helpful for the reader in terms of the the scope of the paper and is designed to draw them in and then show them how your work matters.

What is the scope?

The scope indicates how broadly or narrowly the writing is focused. If the writing in a certain section has a broad scope , it is designed to be accessible to a broad audience . If the writing in a section has a narrow scope , it is designed to be the most focused on your specific work – which is directly accessible to a much smaller audience .

To show you what I mean, I made this diagram that shows how the scope of an IMRAD paper changes from beginning to end:

Note how the scope of a scientific paper makes an hourglass shape.

This makes sense, as the important results of your paper are the narrowest in scope. Because this scope is so narrow, it is not widely known, so it would not be accessible to a reader unless it was bookended with information that is much broader in scope, or information that is more well known and understood. This is how you teach the reader what they need to know to understand your work and give them the tools to place your work in context.

Therefore, the introduction of our paper is going to start at the very broadest scope, first introducing the reader to our field in general and then to our research more specifically. In this way, we will start at a very broad scope and slowly narrow into the results – which represent the narrowest scope in our paper.

Scientific paper structure: Key parts

1. title and abstract: attract the reader’s attention.

A scientific paper usually starts with two key parts that help attract a reader’s attention to your work: the title and abstract.

These parts are designed to essentially be the advertisement for your paper.

This means they need to be informative enough about the content of the paper to attract the right readers to your paper, and they also need to be written in a way that is interesting enough to attract those who might not otherwise find your paper.

Also note, basically any reader who gets to the paper body will have read your title and then abstract. By making sure your title and abstract are as attractive as possible, you can get more readers interested in also reading the paper body!

The title contains the key words of the paper, and tries to organize them in a way that lets the reader know what kind of study you conducted and roughly what you accomplished in that paper.

For all of my advice on writing your title, go here .

The abstract is also written to draw attention to your papers, so you want to structure it in a similar hourglass shape as the paper body.

The abstract should

• start with a broad problem that is relatable to the average reader of that journal
• indicate how your proposed to solve that problem ( hypothesis or research objectives )
• give a few lines about what you did in the paper, including key methods and results
• end with a statement about why your work is important and why it deserves to be published .

This is a lot to ask of a normally 250 word abstract!

Don’t worry – I show you exactly how to do this. For all of my advice on writing your abstract, go here.

Or, you can download your free abstract writing guide here .

2. Introduction: Introduce the reader to your work

After the reader has opened your paper, they need to be introduced to not only your work, but why it matters. This is where the introduction comes in!

Most scientists are good at introducing the literature surrounding their field – which is a big part of the introduction – but struggle to convey the importance or necessity of their work.

Part of this is because many people fail to see the importance of introducing the entire field to the reader to show why it is important to do research in that field.

Therefore, the introduction should start with a very wide overview and include a paragraph at the beginning that introduces the entire field to the reader.

Paragraphs of your introduction

Paragraph 1. The first paragraph of the introduction should answer the question – “Why does my research field exist?” 

Importantly – this paragraph should include a very clear statement of a gap that still exists in the world that your field of research seeks to fill .

Paragraphs 2-3 . Next, it is important to introduce to the reader why your research project exists, which involves the traditional review of relevant literature that most scientists are comfortable writing. These next 1-2 paragraphs should answer the question – “Why does the research in this paper exist?”

Importantly – these paragraphs should include a very clear statement of a gap that still exists in the field that your specific research project seeks to fil l .

Paragraph 4 . The last paragraph of the introduction should give the reader an overview of what to expect in this paper. It should include a typical “Here, we did…” sentence as well as a very short summary of key methods or results.

But we aren’t done yet…

This final paragraph should also end on a sentence that answers the question – “Why does this work matter and deserve to be published?”

The most impactful introductions all end with this forward-thinking statement that helps the reader place the product of your work into context. Don’t underestimate this sentence – getting the “why” into your reader’s head from the beginning can do wonders for their ability to grasp the importance of your work.

For all of my advice on how to write your introduction, go here !

3. Materials and Methods: Tell the reader what you did and how you did it

After setting up why your research projected needed to exist and what you hoped to accomplish, it is time to tell the reader what you did and how you did it.

In terms of text, this section on your materials and methods is the narrowest in scope of all of you paper, as it related to your project alone.

In this section, you need provide enough detail that your work could be repeated.

Tell your reader:

• what materials you used and where you bought them
• what equipment you used
• what protocols you followed
• how you did each experiment
• how you analyzed your results
• how you calculated statistics

If you want your work to be considered robust, others need to be able to repeat it.

At this point, your paper should convey what another lab would need to know to copy what you did in this work.

4. Results: Show the reader what you saw

The final section of the narrow scope in your paper is your results, where you tell the reader what you saw in your experiments.

These paragraphs tell the story of your paper, and should be designed as such.

For the best readability of this section, the results should be structured such that each paragraph :

• represents one experiment or group of related experiments
• begins with a topic sentence that tells the reader what you did in that paragraph and why
• end with a summary statement (1/2 – 1 sentence) telling the reader the main take-home point of that paragraph

The results section should not :

• Provide extra introductory info only when it is needed to understand the following work and does not apply to the entire paper
• Provide only enough here such that the reader understands what experiments were done and what the controls were .
• The reader should not be able to reproduce your experiments from the details in this section
• Provide only enough for the reader to understand the rest of the paper plus the paragraph-ending summary statement .

For all of my advice on how to write your results, go here !

5. Discussion: Walk the reader through what your results mean and how they affect the field

At the end of the paper, the reader needs to know what your results mean and how they integrate in the field – it is the only way to understand the importance and impact of your work!

For this, the discussion is the opposite of the introduction – it funnels the reader OUT of your work, building on your results to connect your work to the field and society as a whole.

Paragraphs of your discussion

Paragraph 1. The first paragraph briefly summarizes the main results of the paper and directly shows how they address the gap in the field  that was mentioned in the introduction.

Paragraphs 2-4. These middle paragraphs discuss your results. For each paragraph, take one key result and:

• analyze it – what does it mean?
• relate it to the field – how does it tie into other work in the field?
• relate it to the gap – how does it help fill the gap that you discussed in the introduction?
• speculate beyond the current limits of the field – what new research questions do these results bring up?
• f uture directions – how can this research be expanded on in the future?

Final paragraph – the conclusion.   The conclusion should never be a summary of the paper – this misses a great opportunity to highlight the importance and impact of your work, and leave the reader with a forward-thinking outlook.

The conclusion does a disservice to your paper if it doesn’t highlight why your work deserves to be published. Make sure it answers:

• Why should scientists be excited about this work?
• Why should non-scientists be excited?

For all of my advice on how to write your discussion, go here !

Scientific paper structure: Putting it all together and writing

Now after seeing how a scientific paper is structured and why, you might still be struggling to write the paper…don’t worry, this is completely normal!

Just because we know the structure we need to strive for, it still isn’t easy to translate our work into a paper. This is because the way a paper is structured is designed to help the reader through the process, but it is not necessarily the easiest ordering for writing a paper.

To now learn how to WRITE your scientific paper, you can find all of my advice on that topic here .

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

FREE ABSTRACT E-COURSE

Including: -> Detailed breakdowns of ideal abstracts -> Most common mistakes and how to avoid them ->How to WRITE your abstract from scratch ->And all of our best tips , info , and everything you need to know

But we don’t stop there! Joining our community includes: ->Members-only discounts on all of our courses ->Tips for writing , editing , and publishing your science -> First access to all our material direct to your inbox  – NO SPAM !

Here - have a cookie!

Privacy overview.

• Privacy Policy

Buy Me a Coffee

Home » Research Paper – Structure, Examples and Writing Guide

Research Paper – Structure, Examples and Writing Guide

Table of Contents

Research Paper

Definition:

Research Paper is a written document that presents the author’s original research, analysis, and interpretation of a specific topic or issue.

It is typically based on Empirical Evidence, and may involve qualitative or quantitative research methods, or a combination of both. The purpose of a research paper is to contribute new knowledge or insights to a particular field of study, and to demonstrate the author’s understanding of the existing literature and theories related to the topic.

Structure of Research Paper

The structure of a research paper typically follows a standard format, consisting of several sections that convey specific information about the research study. The following is a detailed explanation of the structure of a research paper:

The title page contains the title of the paper, the name(s) of the author(s), and the affiliation(s) of the author(s). It also includes the date of submission and possibly, the name of the journal or conference where the paper is to be published.

The abstract is a brief summary of the research paper, typically ranging from 100 to 250 words. It should include the research question, the methods used, the key findings, and the implications of the results. The abstract should be written in a concise and clear manner to allow readers to quickly grasp the essence of the research.

Introduction

The introduction section of a research paper provides background information about the research problem, the research question, and the research objectives. It also outlines the significance of the research, the research gap that it aims to fill, and the approach taken to address the research question. Finally, the introduction section ends with a clear statement of the research hypothesis or research question.

Literature Review

The literature review section of a research paper provides an overview of the existing literature on the topic of study. It includes a critical analysis and synthesis of the literature, highlighting the key concepts, themes, and debates. The literature review should also demonstrate the research gap and how the current study seeks to address it.

The methods section of a research paper describes the research design, the sample selection, the data collection and analysis procedures, and the statistical methods used to analyze the data. This section should provide sufficient detail for other researchers to replicate the study.

The results section presents the findings of the research, using tables, graphs, and figures to illustrate the data. The findings should be presented in a clear and concise manner, with reference to the research question and hypothesis.

The discussion section of a research paper interprets the findings and discusses their implications for the research question, the literature review, and the field of study. It should also address the limitations of the study and suggest future research directions.

The conclusion section summarizes the main findings of the study, restates the research question and hypothesis, and provides a final reflection on the significance of the research.

The references section provides a list of all the sources cited in the paper, following a specific citation style such as APA, MLA or Chicago.

How to Write Research Paper

You can write Research Paper by the following guide:

• Choose a Topic: The first step is to select a topic that interests you and is relevant to your field of study. Brainstorm ideas and narrow down to a research question that is specific and researchable.
• Conduct a Literature Review: The literature review helps you identify the gap in the existing research and provides a basis for your research question. It also helps you to develop a theoretical framework and research hypothesis.
• Develop a Thesis Statement : The thesis statement is the main argument of your research paper. It should be clear, concise and specific to your research question.
• Plan your Research: Develop a research plan that outlines the methods, data sources, and data analysis procedures. This will help you to collect and analyze data effectively.
• Collect and Analyze Data: Collect data using various methods such as surveys, interviews, observations, or experiments. Analyze data using statistical tools or other qualitative methods.
• Organize your Paper : Organize your paper into sections such as Introduction, Literature Review, Methods, Results, Discussion, and Conclusion. Ensure that each section is coherent and follows a logical flow.
• Write your Paper : Start by writing the introduction, followed by the literature review, methods, results, discussion, and conclusion. Ensure that your writing is clear, concise, and follows the required formatting and citation styles.
• Edit and Proofread your Paper: Review your paper for grammar and spelling errors, and ensure that it is well-structured and easy to read. Ask someone else to review your paper to get feedback and suggestions for improvement.
• Cite your Sources: Ensure that you properly cite all sources used in your research paper. This is essential for giving credit to the original authors and avoiding plagiarism.

Research Paper Example

Note : The below example research paper is for illustrative purposes only and is not an actual research paper. Actual research papers may have different structures, contents, and formats depending on the field of study, research question, data collection and analysis methods, and other factors. Students should always consult with their professors or supervisors for specific guidelines and expectations for their research papers.

Research Paper Example sample for Students:

Title: The Impact of Social Media on Mental Health among Young Adults

Abstract: This study aims to investigate the impact of social media use on the mental health of young adults. A literature review was conducted to examine the existing research on the topic. A survey was then administered to 200 university students to collect data on their social media use, mental health status, and perceived impact of social media on their mental health. The results showed that social media use is positively associated with depression, anxiety, and stress. The study also found that social comparison, cyberbullying, and FOMO (Fear of Missing Out) are significant predictors of mental health problems among young adults.

Introduction: Social media has become an integral part of modern life, particularly among young adults. While social media has many benefits, including increased communication and social connectivity, it has also been associated with negative outcomes, such as addiction, cyberbullying, and mental health problems. This study aims to investigate the impact of social media use on the mental health of young adults.

Literature Review: The literature review highlights the existing research on the impact of social media use on mental health. The review shows that social media use is associated with depression, anxiety, stress, and other mental health problems. The review also identifies the factors that contribute to the negative impact of social media, including social comparison, cyberbullying, and FOMO.

Methods : A survey was administered to 200 university students to collect data on their social media use, mental health status, and perceived impact of social media on their mental health. The survey included questions on social media use, mental health status (measured using the DASS-21), and perceived impact of social media on their mental health. Data were analyzed using descriptive statistics and regression analysis.

Results : The results showed that social media use is positively associated with depression, anxiety, and stress. The study also found that social comparison, cyberbullying, and FOMO are significant predictors of mental health problems among young adults.

Discussion : The study’s findings suggest that social media use has a negative impact on the mental health of young adults. The study highlights the need for interventions that address the factors contributing to the negative impact of social media, such as social comparison, cyberbullying, and FOMO.

Conclusion : In conclusion, social media use has a significant impact on the mental health of young adults. The study’s findings underscore the need for interventions that promote healthy social media use and address the negative outcomes associated with social media use. Future research can explore the effectiveness of interventions aimed at reducing the negative impact of social media on mental health. Additionally, longitudinal studies can investigate the long-term effects of social media use on mental health.

Limitations : The study has some limitations, including the use of self-report measures and a cross-sectional design. The use of self-report measures may result in biased responses, and a cross-sectional design limits the ability to establish causality.

Implications: The study’s findings have implications for mental health professionals, educators, and policymakers. Mental health professionals can use the findings to develop interventions that address the negative impact of social media use on mental health. Educators can incorporate social media literacy into their curriculum to promote healthy social media use among young adults. Policymakers can use the findings to develop policies that protect young adults from the negative outcomes associated with social media use.

References :

• Twenge, J. M., & Campbell, W. K. (2019). Associations between screen time and lower psychological well-being among children and adolescents: Evidence from a population-based study. Preventive medicine reports, 15, 100918.
• Primack, B. A., Shensa, A., Escobar-Viera, C. G., Barrett, E. L., Sidani, J. E., Colditz, J. B., … & James, A. E. (2017). Use of multiple social media platforms and symptoms of depression and anxiety: A nationally-representative study among US young adults. Computers in Human Behavior, 69, 1-9.
• Van der Meer, T. G., & Verhoeven, J. W. (2017). Social media and its impact on academic performance of students. Journal of Information Technology Education: Research, 16, 383-398.

Appendix : The survey used in this study is provided below.

Social Media and Mental Health Survey

• How often do you use social media per day?
• Less than 30 minutes
• 30 minutes to 1 hour
• 1 to 2 hours
• 2 to 4 hours
• More than 4 hours
• Which social media platforms do you use?
• Others (Please specify)
• How often do you experience the following on social media?
• Social comparison (comparing yourself to others)
• Cyberbullying
• Fear of Missing Out (FOMO)
• Have you ever experienced any of the following mental health problems in the past month?
• Do you think social media use has a positive or negative impact on your mental health?
• Very positive
• Somewhat positive
• Somewhat negative
• Very negative
• In your opinion, which factors contribute to the negative impact of social media on mental health?
• Social comparison
• In your opinion, what interventions could be effective in reducing the negative impact of social media on mental health?
• Education on healthy social media use
• Counseling for mental health problems caused by social media
• Social media detox programs
• Regulation of social media use

Thank you for your participation!

Applications of Research Paper

Research papers have several applications in various fields, including:

• Advancing knowledge: Research papers contribute to the advancement of knowledge by generating new insights, theories, and findings that can inform future research and practice. They help to answer important questions, clarify existing knowledge, and identify areas that require further investigation.
• Informing policy: Research papers can inform policy decisions by providing evidence-based recommendations for policymakers. They can help to identify gaps in current policies, evaluate the effectiveness of interventions, and inform the development of new policies and regulations.
• Improving practice: Research papers can improve practice by providing evidence-based guidance for professionals in various fields, including medicine, education, business, and psychology. They can inform the development of best practices, guidelines, and standards of care that can improve outcomes for individuals and organizations.
• Educating students : Research papers are often used as teaching tools in universities and colleges to educate students about research methods, data analysis, and academic writing. They help students to develop critical thinking skills, research skills, and communication skills that are essential for success in many careers.
• Fostering collaboration: Research papers can foster collaboration among researchers, practitioners, and policymakers by providing a platform for sharing knowledge and ideas. They can facilitate interdisciplinary collaborations and partnerships that can lead to innovative solutions to complex problems.

When to Write Research Paper

Research papers are typically written when a person has completed a research project or when they have conducted a study and have obtained data or findings that they want to share with the academic or professional community. Research papers are usually written in academic settings, such as universities, but they can also be written in professional settings, such as research organizations, government agencies, or private companies.

Here are some common situations where a person might need to write a research paper:

• For academic purposes: Students in universities and colleges are often required to write research papers as part of their coursework, particularly in the social sciences, natural sciences, and humanities. Writing research papers helps students to develop research skills, critical thinking skills, and academic writing skills.
• For publication: Researchers often write research papers to publish their findings in academic journals or to present their work at academic conferences. Publishing research papers is an important way to disseminate research findings to the academic community and to establish oneself as an expert in a particular field.
• To inform policy or practice : Researchers may write research papers to inform policy decisions or to improve practice in various fields. Research findings can be used to inform the development of policies, guidelines, and best practices that can improve outcomes for individuals and organizations.
• To share new insights or ideas: Researchers may write research papers to share new insights or ideas with the academic or professional community. They may present new theories, propose new research methods, or challenge existing paradigms in their field.

Purpose of Research Paper

The purpose of a research paper is to present the results of a study or investigation in a clear, concise, and structured manner. Research papers are written to communicate new knowledge, ideas, or findings to a specific audience, such as researchers, scholars, practitioners, or policymakers. The primary purposes of a research paper are:

• To contribute to the body of knowledge : Research papers aim to add new knowledge or insights to a particular field or discipline. They do this by reporting the results of empirical studies, reviewing and synthesizing existing literature, proposing new theories, or providing new perspectives on a topic.
• To inform or persuade: Research papers are written to inform or persuade the reader about a particular issue, topic, or phenomenon. They present evidence and arguments to support their claims and seek to persuade the reader of the validity of their findings or recommendations.
• To advance the field: Research papers seek to advance the field or discipline by identifying gaps in knowledge, proposing new research questions or approaches, or challenging existing assumptions or paradigms. They aim to contribute to ongoing debates and discussions within a field and to stimulate further research and inquiry.
• To demonstrate research skills: Research papers demonstrate the author’s research skills, including their ability to design and conduct a study, collect and analyze data, and interpret and communicate findings. They also demonstrate the author’s ability to critically evaluate existing literature, synthesize information from multiple sources, and write in a clear and structured manner.

Characteristics of Research Paper

Research papers have several characteristics that distinguish them from other forms of academic or professional writing. Here are some common characteristics of research papers:

• Evidence-based: Research papers are based on empirical evidence, which is collected through rigorous research methods such as experiments, surveys, observations, or interviews. They rely on objective data and facts to support their claims and conclusions.
• Structured and organized: Research papers have a clear and logical structure, with sections such as introduction, literature review, methods, results, discussion, and conclusion. They are organized in a way that helps the reader to follow the argument and understand the findings.
• Formal and objective: Research papers are written in a formal and objective tone, with an emphasis on clarity, precision, and accuracy. They avoid subjective language or personal opinions and instead rely on objective data and analysis to support their arguments.
• Citations and references: Research papers include citations and references to acknowledge the sources of information and ideas used in the paper. They use a specific citation style, such as APA, MLA, or Chicago, to ensure consistency and accuracy.
• Peer-reviewed: Research papers are often peer-reviewed, which means they are evaluated by other experts in the field before they are published. Peer-review ensures that the research is of high quality, meets ethical standards, and contributes to the advancement of knowledge in the field.
• Objective and unbiased: Research papers strive to be objective and unbiased in their presentation of the findings. They avoid personal biases or preconceptions and instead rely on the data and analysis to draw conclusions.

Advantages of Research Paper

Research papers have many advantages, both for the individual researcher and for the broader academic and professional community. Here are some advantages of research papers:

• Contribution to knowledge: Research papers contribute to the body of knowledge in a particular field or discipline. They add new information, insights, and perspectives to existing literature and help advance the understanding of a particular phenomenon or issue.
• Opportunity for intellectual growth: Research papers provide an opportunity for intellectual growth for the researcher. They require critical thinking, problem-solving, and creativity, which can help develop the researcher’s skills and knowledge.
• Career advancement: Research papers can help advance the researcher’s career by demonstrating their expertise and contributions to the field. They can also lead to new research opportunities, collaborations, and funding.
• Academic recognition: Research papers can lead to academic recognition in the form of awards, grants, or invitations to speak at conferences or events. They can also contribute to the researcher’s reputation and standing in the field.
• Impact on policy and practice: Research papers can have a significant impact on policy and practice. They can inform policy decisions, guide practice, and lead to changes in laws, regulations, or procedures.
• Advancement of society: Research papers can contribute to the advancement of society by addressing important issues, identifying solutions to problems, and promoting social justice and equality.

Limitations of Research Paper

Research papers also have some limitations that should be considered when interpreting their findings or implications. Here are some common limitations of research papers:

• Limited generalizability: Research findings may not be generalizable to other populations, settings, or contexts. Studies often use specific samples or conditions that may not reflect the broader population or real-world situations.
• Potential for bias : Research papers may be biased due to factors such as sample selection, measurement errors, or researcher biases. It is important to evaluate the quality of the research design and methods used to ensure that the findings are valid and reliable.
• Ethical concerns: Research papers may raise ethical concerns, such as the use of vulnerable populations or invasive procedures. Researchers must adhere to ethical guidelines and obtain informed consent from participants to ensure that the research is conducted in a responsible and respectful manner.
• Limitations of methodology: Research papers may be limited by the methodology used to collect and analyze data. For example, certain research methods may not capture the complexity or nuance of a particular phenomenon, or may not be appropriate for certain research questions.
• Publication bias: Research papers may be subject to publication bias, where positive or significant findings are more likely to be published than negative or non-significant findings. This can skew the overall findings of a particular area of research.
• Time and resource constraints: Research papers may be limited by time and resource constraints, which can affect the quality and scope of the research. Researchers may not have access to certain data or resources, or may be unable to conduct long-term studies due to practical limitations.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

How to Cite Research Paper – All Formats and...

Data Collection – Methods Types and Examples

Delimitations in Research – Types, Examples and...

Research Paper Format – Types, Examples and...

Research Process – Steps, Examples and Tips

Research Design – Types, Methods and Examples

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List

A Guide to Writing a Scientific Paper: A Focus on High School Through Graduate Level Student Research

Renee a. hesselbach.

1 NIEHS Children's Environmental Health Sciences Core Center, University of Wisconsin—Milwaukee, Milwaukee, Wisconsin.

David H. Petering

2 Department of Chemistry and Biochemistry, University of Wisconsin—Milwaukee, Milwaukee, Wisconsin.

Craig A. Berg

3 Curriculum and Instruction, University of Wisconsin—Milwaukee, Milwaukee, Wisconsin.

Henry Tomasiewicz

Daniel weber.

This article presents a detailed guide for high school through graduate level instructors that leads students to write effective and well-organized scientific papers. Interesting research emerges from the ability to ask questions, define problems, design experiments, analyze and interpret data, and make critical connections. This process is incomplete, unless new results are communicated to others because science fundamentally requires peer review and criticism to validate or discard proposed new knowledge. Thus, a concise and clearly written research paper is a critical step in the scientific process and is important for young researchers as they are mastering how to express scientific concepts and understanding. Moreover, learning to write a research paper provides a tool to improve science literacy as indicated in the National Research Council's National Science Education Standards (1996), and A Framework for K–12 Science Education (2011), the underlying foundation for the Next Generation Science Standards currently being developed. Background information explains the importance of peer review and communicating results, along with details of each critical component, the Abstract, Introduction, Methods, Results , and Discussion . Specific steps essential to helping students write clear and coherent research papers that follow a logical format, use effective communication, and develop scientific inquiry are described.

Introduction

A key part of the scientific process is communication of original results to others so that one's discoveries are passed along to the scientific community and the public for awareness and scrutiny. 1 – 3 Communication to other scientists ensures that new findings become part of a growing body of publicly available knowledge that informs how we understand the world around us. 2 It is also what fuels further research as other scientists incorporate novel findings into their thinking and experiments.

Depending upon the researcher's position, intent, and needs, communication can take different forms. The gold standard is writing scientific papers that describe original research in such a way that other scientists will be able to repeat it or to use it as a basis for their studies. 1 For some, it is expected that such articles will be published in scientific journals after they have been peer reviewed and accepted for publication. Scientists must submit their articles for examination by other scientists familiar with the area of research, who decide whether the work was conducted properly and whether the results add to the knowledge base and are conveyed well enough to merit publication. 2 If a manuscript passes the scrutiny of peer-review, it has the potential to be published. 1 For others, such as for high school or undergraduate students, publishing a research paper may not be the ultimate goal. However, regardless of whether an article is to be submitted for publication, peer review is an important step in this process. For student researchers, writing a well-organized research paper is a key step in learning how to express understanding, make critical connections, summarize data, and effectively communicate results, which are important goals for improving science literacy of the National Research Council's National Science Education Standards, 4 and A Framework for K–12 Science Education, 5 and the Next Generation Science Standards 6 currently being developed and described in The NSTA Reader's Guide to A Framework for K–12 Science Education. 7 Table 1 depicts the key skills students should develop as part of the Science as Inquiry Content Standard. Table 2 illustrates the central goals of A Framework for K–12 Science Education Scientific and Engineering Practices Dimension.

Key Skills of the Science as Inquiry National Science Education Content Standard

National Research Council (1996).

Important Practices of A Framework for K–12 Science Education Scientific and Engineering Practices Dimension

National Research Council (2011).

Scientific papers based on experimentation typically include five predominant sections: Abstract, Introduction, Methods, Results, and Discussion . This structure is a widely accepted approach to writing a research paper, and has specific sections that parallel the scientific method. Following this structure allows the scientist to tell a clear, coherent story in a logical format, essential to effective communication. 1 , 2 In addition, using a standardized format allows the reader to find specific information quickly and easily. While readers may not have time to read the entire research paper, the predictable format allows them to focus on specific sections such as the Abstract , Introduction , and Discussion sections. Therefore, it is critical that information be placed in the appropriate and logical section of the report. 3

Guidelines for Writing a Primary Research Article

The Title sends an important message to the reader about the purpose of the paper. For example, Ethanol Effects on the Developing Zebrafish: Neurobehavior and Skeletal Morphogenesis 8 tells the reader key information about the content of the research paper. Also, an appropriate and descriptive title captures the attention of the reader. When composing the Title , students should include either the aim or conclusion of the research, the subject, and possibly the independent or dependent variables. Often, the title is created after the body of the article has been written, so that it accurately reflects the purpose and content of the article. 1 , 3

The Abstract provides a short, concise summary of the research described in the body of the article and should be able to stand alone. It provides readers with a quick overview that helps them decide whether the article may be interesting to read. Included in the Abstract are the purpose or primary objectives of the experiment and why they are important, a brief description of the methods and approach used, key findings and the significance of the results, and how this work is different from the work of others. It is important to note that the Abstract briefly explains the implications of the findings, but does not evaluate the conclusions. 1 , 3 Just as with the Title , this section needs to be written carefully and succinctly. Often this section is written last to ensure it accurately reflects the content of the paper. Generally, the optimal length of the Abstract is one paragraph between 200 and 300 words, and does not contain references or abbreviations.

All new research can be categorized by field (e.g., biology, chemistry, physics, geology) and by area within the field (e.g., biology: evolution, ecology, cell biology, anatomy, environmental health). Many areas already contain a large volume of published research. The role of the Introduction is to place the new research within the context of previous studies in the particular field and area, thereby introducing the audience to the research and motivating the audience to continue reading. 1

Usually, the writer begins by describing what is known in the area that directly relates to the subject of the article's research. Clearly, this must be done judiciously; usually there is not room to describe every bit of information that is known. Each statement needs one or more references from the scientific literature that supports its validity. Students must be reminded to cite all references to eliminate the risk of plagiarism. 2 Out of this context, the author then explains what is not known and, therefore, what the article's research seeks to find out. In doing so, the scientist provides the rationale for the research and further develops why this research is important. The final statement in the Introduction should be a clearly worded hypothesis or thesis statement, as well as a brief summary of the findings as they relate to the stated hypothesis. Keep in mind that the details of the experimental findings are presented in the Results section and are aimed at filling the void in our knowledge base that has been pointed out in the Introduction .

Materials and Methods

Research utilizes various accepted methods to obtain the results that are to be shared with others in the scientific community. The quality of the results, therefore, depends completely upon the quality of the methods that are employed and the care with which they are applied. The reader will refer to the Methods section: (a) to become confident that the experiments have been properly done, (b) as the guide for repeating the experiments, and (c) to learn how to do new methods.

It is particularly important to keep in mind item (b). Since science deals with the objective properties of the physical and biological world, it is a basic axiom that these properties are independent of the scientist who reported them. Everyone should be able to measure or observe the same properties within error, if they do the same experiment using the same materials and procedures. In science, one does the same experiment by exactly repeating the experiment that has been described in the Methods section. Therefore, someone can only repeat an experiment accurately if all the relevant details of the experimental methods are clearly described. 1 , 3

The following information is important to include under illustrative headings, and is generally presented in narrative form. A detailed list of all the materials used in the experiments and, if important, their source should be described. These include biological agents (e.g., zebrafish, brine shrimp), chemicals and their concentrations (e.g., 0.20 mg/mL nicotine), and physical equipment (e.g., four 10-gallon aquariums, one light timer, one 10-well falcon dish). The reader needs to know as much as necessary about each of the materials; however, it is important not to include extraneous information. For example, consider an experiment involving zebrafish. The type and characteristics of the zebrafish used must be clearly described so another scientist could accurately replicate the experiment, such as 4–6-month-old male and female zebrafish, the type of zebrafish used (e.g., Golden), and where they were obtained (e.g., the NIEHS Children's Environmental Health Sciences Core Center in the WATER Institute of the University of Wisconsin—Milwaukee). In addition to describing the physical set-up of the experiment, it may be helpful to include photographs or diagrams in the report to further illustrate the experimental design.

A thorough description of each procedure done in the reported experiment, and justification as to why a particular method was chosen to most effectively answer the research question should also be included. For example, if the scientist was using zebrafish to study developmental effects of nicotine, the reader needs to know details about how and when the zebrafish were exposed to the nicotine (e.g., maternal exposure, embryo injection of nicotine, exposure of developing embryo to nicotine in the water for a particular length of time during development), duration of the exposure (e.g., a certain concentration for 10 minutes at the two-cell stage, then the embryos were washed), how many were exposed, and why that method was chosen. The reader would also need to know the concentrations to which the zebrafish were exposed, how the scientist observed the effects of the chemical exposure (e.g., microscopic changes in structure, changes in swimming behavior), relevant safety and toxicity concerns, how outcomes were measured, and how the scientist determined whether the data/results were significantly different in experimental and unexposed control animals (statistical methods).

Students must take great care and effort to write a good Methods section because it is an essential component of the effective communication of scientific findings.

The Results section describes in detail the actual experiments that were undertaken in a clear and well-organized narrative. The information found in the Methods section serves as background for understanding these descriptions and does not need to be repeated. For each different experiment, the author may wish to provide a subtitle and, in addition, one or more introductory sentences that explains the reason for doing the experiment. In a sense, this information is an extension of the Introduction in that it makes the argument to the reader why it is important to do the experiment. The Introduction is more general; this text is more specific.

Once the reader understands the focus of the experiment, the writer should restate the hypothesis to be tested or the information sought in the experiment. For example, “Atrazine is routinely used as a crop pesticide. It is important to understand whether it affects organisms that are normally found in soil. We decided to use worms as a test organism because they are important members of the soil community. Because atrazine damages nerve cells, we hypothesized that exposure to atrazine will inhibit the ability of worms to do locomotor activities. In the first experiment, we tested the effect of the chemical on burrowing action.”

Then, the experiments to be done are described and the results entered. In reporting on experimental design, it is important to identify the dependent and independent variables clearly, as well as the controls. The results must be shown in a way that can be reproduced by the reader, but do not include more details than needed for an effective analysis. Generally, meaningful and significant data are gathered together into tables and figures that summarize relevant information, and appropriate statistical analyses are completed based on the data gathered. Besides presenting each of these data sources, the author also provides a written narrative of the contents of the figures and tables, as well as an analysis of the statistical significance. In the narrative, the writer also connects the results to the aims of the experiment as described above. Did the results support the initial hypothesis? Do they provide the information that was sought? Were there problems in the experiment that compromised the results? Be careful not to include an interpretation of the results; that is reserved for the Discussion section.

The writer then moves on to the next experiment. Again, the first paragraph is developed as above, except this experiment is seen in the context of the first experiment. In other words, a story is being developed. So, one commonly refers to the results of the first experiment as part of the basis for undertaking the second experiment. “In the first experiment we observed that atrazine altered burrowing activity. In order to understand how that might occur, we decided to study its impact on the basic biology of locomotion. Our hypothesis was that atrazine affected neuromuscular junctions. So, we did the following experiment..”

The Results section includes a focused critical analysis of each experiment undertaken. A hallmark of the scientist is a deep skepticism about results and conclusions. “Convince me! And then convince me again with even better experiments.” That is the constant challenge. Without this basic attitude of doubt and willingness to criticize one's own work, scientists do not get to the level of concern about experimental methods and results that is needed to ensure that the best experiments are being done and the most reproducible results are being acquired. Thus, it is important for students to state any limitations or weaknesses in their research approach and explain assumptions made upfront in this section so the validity of the research can be assessed.

The Discussion section is the where the author takes an overall view of the work presented in the article. First, the main results from the various experiments are gathered in one place to highlight the significant results so the reader can see how they fit together and successfully test the original hypotheses of the experiment. Logical connections and trends in the data are presented, as are discussions of error and other possible explanations for the findings, including an analysis of whether the experimental design was adequate. Remember, results should not be restated in the Discussion section, except insofar as it is absolutely necessary to make a point.

Second, the task is to help the reader link the present work with the larger body of knowledge that was portrayed in the Introduction . How do the results advance the field, and what are the implications? What does the research results mean? What is the relevance? 1 , 3

Lastly, the author may suggest further work that needs to be done based on the new knowledge gained from the research.

Supporting Documentation and Writing Skills

Tables and figures are included to support the content of the research paper. These provide the reader with a graphic display of information presented. Tables and figures must have illustrative and descriptive titles, legends, interval markers, and axis labels, as appropriate; should be numbered in the order that they appear in the report; and include explanations of any unusual abbreviations.

The final section of the scientific article is the Reference section. When citing sources, it is important to follow an accepted standardized format, such as CSE (Council of Science Editors), APA (American Psychological Association), MLA (Modern Language Association), or CMS (Chicago Manual of Style). References should be listed in alphabetical order and original authors cited. All sources cited in the text must be included in the Reference section. 1

When writing a scientific paper, the importance of writing concisely and accurately to clearly communicate the message should be emphasized to students. 1 – 3 Students should avoid slang and repetition, as well as abbreviations that may not be well known. 1 If an abbreviation must be used, identify the word with the abbreviation in parentheses the first time the term is used. Using appropriate and correct grammar and spelling throughout are essential elements of a well-written report. 1 , 3 Finally, when the article has been organized and formatted properly, students are encouraged to peer review to obtain constructive criticism and then to revise the manuscript appropriately. Good scientific writing, like any kind of writing, is a process that requires careful editing and revision. 1

A key dimension of NRC's A Framework for K–12 Science Education , Scientific and Engineering Practices, and the developing Next Generation Science Standards emphasizes the importance of students being able to ask questions, define problems, design experiments, analyze and interpret data, draw conclusions, and communicate results. 5 , 6 In the Science Education Partnership Award (SEPA) program at the University of Wisconsin—Milwaukee, we found the guidelines presented in this article useful for high school science students because this group of students (and probably most undergraduates) often lack in understanding of, and skills to develop and write, the various components of an effective scientific paper. Students routinely need to focus more on the data collected and analyze what the results indicated in relation to the research question/hypothesis, as well as develop a detailed discussion of what they learned. Consequently, teaching students how to effectively organize and write a research report is a critical component when engaging students in scientific inquiry.

Acknowledgments

This article was supported by a Science Education Partnership Award (SEPA) grant (Award Number R25RR026299) from the National Institute of Environmental Health Sciences of the National Institutes of Health. The SEPA program at the University of Wisconsin—Milwaukee is part of the Children's Environmental Health Sciences Core Center, Community Outreach and Education Core, funded by the National Institute of Environmental Health Sciences (Award Number P30ES004184). The content is solely the responsibility of the authors and does not necessarily represent the official views of the National Institutes of Health or the National Institute of Environmental Health Sciences.

Disclosure Statement

No competing financial interests exist.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Research paper

How to Write a Research Paper | A Beginner's Guide

A research paper is a piece of academic writing that provides analysis, interpretation, and argument based on in-depth independent research.

Research papers are similar to academic essays , but they are usually longer and more detailed assignments, designed to assess not only your writing skills but also your skills in scholarly research. Writing a research paper requires you to demonstrate a strong knowledge of your topic, engage with a variety of sources, and make an original contribution to the debate.

This step-by-step guide takes you through the entire writing process, from understanding your assignment to proofreading your final draft.

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Understand the assignment, choose a research paper topic, conduct preliminary research, develop a thesis statement, create a research paper outline, write a first draft of the research paper, write the introduction, write a compelling body of text, write the conclusion, the second draft, the revision process, research paper checklist, free lecture slides.

Completing a research paper successfully means accomplishing the specific tasks set out for you. Before you start, make sure you thoroughly understanding the assignment task sheet:

• Read it carefully, looking for anything confusing you might need to clarify with your professor.
• Identify the assignment goal, deadline, length specifications, formatting, and submission method.
• Make a bulleted list of the key points, then go back and cross completed items off as you’re writing.

Carefully consider your timeframe and word limit: be realistic, and plan enough time to research, write, and edit.

Receive feedback on language, structure, and formatting

Professional editors proofread and edit your paper by focusing on:

• Academic style
• Vague sentences
• Style consistency

See an example

There are many ways to generate an idea for a research paper, from brainstorming with pen and paper to talking it through with a fellow student or professor.

You can try free writing, which involves taking a broad topic and writing continuously for two or three minutes to identify absolutely anything relevant that could be interesting.

You can also gain inspiration from other research. The discussion or recommendations sections of research papers often include ideas for other specific topics that require further examination.

Once you have a broad subject area, narrow it down to choose a topic that interests you, m eets the criteria of your assignment, and i s possible to research. Aim for ideas that are both original and specific:

• A paper following the chronology of World War II would not be original or specific enough.
• A paper on the experience of Danish citizens living close to the German border during World War II would be specific and could be original enough.

Note any discussions that seem important to the topic, and try to find an issue that you can focus your paper around. Use a variety of sources , including journals, books, and reliable websites, to ensure you do not miss anything glaring.

Do not only verify the ideas you have in mind, but look for sources that contradict your point of view.

• Is there anything people seem to overlook in the sources you research?
• Are there any heated debates you can address?
• Do you have a unique take on your topic?
• Have there been some recent developments that build on the extant research?

In this stage, you might find it helpful to formulate some research questions to help guide you. To write research questions, try to finish the following sentence: “I want to know how/what/why…”

A thesis statement is a statement of your central argument — it establishes the purpose and position of your paper. If you started with a research question, the thesis statement should answer it. It should also show what evidence and reasoning you’ll use to support that answer.

The thesis statement should be concise, contentious, and coherent. That means it should briefly summarize your argument in a sentence or two, make a claim that requires further evidence or analysis, and make a coherent point that relates to every part of the paper.

You will probably revise and refine the thesis statement as you do more research, but it can serve as a guide throughout the writing process. Every paragraph should aim to support and develop this central claim.

Prevent plagiarism. Run a free check.

A research paper outline is essentially a list of the key topics, arguments, and evidence you want to include, divided into sections with headings so that you know roughly what the paper will look like before you start writing.

A structure outline can help make the writing process much more efficient, so it’s worth dedicating some time to create one.

Your first draft won’t be perfect — you can polish later on. Your priorities at this stage are as follows:

• Maintaining forward momentum — write now, perfect later.
• Paying attention to clear organization and logical ordering of paragraphs and sentences, which will help when you come to the second draft.
• Expressing your ideas as clearly as possible, so you know what you were trying to say when you come back to the text.

You do not need to start by writing the introduction. Begin where it feels most natural for you — some prefer to finish the most difficult sections first, while others choose to start with the easiest part. If you created an outline, use it as a map while you work.

Do not delete large sections of text. If you begin to dislike something you have written or find it doesn’t quite fit, move it to a different document, but don’t lose it completely — you never know if it might come in useful later.

Paragraph structure

Paragraphs are the basic building blocks of research papers. Each one should focus on a single claim or idea that helps to establish the overall argument or purpose of the paper.

Example paragraph

George Orwell’s 1946 essay “Politics and the English Language” has had an enduring impact on thought about the relationship between politics and language. This impact is particularly obvious in light of the various critical review articles that have recently referenced the essay. For example, consider Mark Falcoff’s 2009 article in The National Review Online, “The Perversion of Language; or, Orwell Revisited,” in which he analyzes several common words (“activist,” “civil-rights leader,” “diversity,” and more). Falcoff’s close analysis of the ambiguity built into political language intentionally mirrors Orwell’s own point-by-point analysis of the political language of his day. Even 63 years after its publication, Orwell’s essay is emulated by contemporary thinkers.

Citing sources

It’s also important to keep track of citations at this stage to avoid accidental plagiarism . Each time you use a source, make sure to take note of where the information came from.

You can use our free citation generators to automatically create citations and save your reference list as you go.

APA Citation Generator MLA Citation Generator

The research paper introduction should address three questions: What, why, and how? After finishing the introduction, the reader should know what the paper is about, why it is worth reading, and how you’ll build your arguments.

What? Be specific about the topic of the paper, introduce the background, and define key terms or concepts.

Why? This is the most important, but also the most difficult, part of the introduction. Try to provide brief answers to the following questions: What new material or insight are you offering? What important issues does your essay help define or answer?

How? To let the reader know what to expect from the rest of the paper, the introduction should include a “map” of what will be discussed, briefly presenting the key elements of the paper in chronological order.

The major struggle faced by most writers is how to organize the information presented in the paper, which is one reason an outline is so useful. However, remember that the outline is only a guide and, when writing, you can be flexible with the order in which the information and arguments are presented.

One way to stay on track is to use your thesis statement and topic sentences . Check:

• topic sentences against the thesis statement;
• topic sentences against each other, for similarities and logical ordering;
• and each sentence against the topic sentence of that paragraph.

Be aware of paragraphs that seem to cover the same things. If two paragraphs discuss something similar, they must approach that topic in different ways. Aim to create smooth transitions between sentences, paragraphs, and sections.

The research paper conclusion is designed to help your reader out of the paper’s argument, giving them a sense of finality.

Trace the course of the paper, emphasizing how it all comes together to prove your thesis statement. Give the paper a sense of finality by making sure the reader understands how you’ve settled the issues raised in the introduction.

You might also discuss the more general consequences of the argument, outline what the paper offers to future students of the topic, and suggest any questions the paper’s argument raises but cannot or does not try to answer.

You should not :

• Offer new arguments or essential information
• Take up any more space than necessary
• Begin with stock phrases that signal you are ending the paper (e.g. “In conclusion”)

There are four main considerations when it comes to the second draft.

• Check how your vision of the paper lines up with the first draft and, more importantly, that your paper still answers the assignment.
• Identify any assumptions that might require (more substantial) justification, keeping your reader’s perspective foremost in mind. Remove these points if you cannot substantiate them further.
• Be open to rearranging your ideas. Check whether any sections feel out of place and whether your ideas could be better organized.
• If you find that old ideas do not fit as well as you anticipated, you should cut them out or condense them. You might also find that new and well-suited ideas occurred to you during the writing of the first draft — now is the time to make them part of the paper.

The goal during the revision and proofreading process is to ensure you have completed all the necessary tasks and that the paper is as well-articulated as possible. You can speed up the proofreading process by using the AI proofreader .

Global concerns

• Confirm that your paper completes every task specified in your assignment sheet.
• Check for logical organization and flow of paragraphs.
• Check paragraphs against the introduction and thesis statement.

Fine-grained details

Check the content of each paragraph, making sure that:

• each sentence helps support the topic sentence.
• no unnecessary or irrelevant information is present.
• all technical terms your audience might not know are identified.

Next, think about sentence structure , grammatical errors, and formatting . Check that you have correctly used transition words and phrases to show the connections between your ideas. Look for typos, cut unnecessary words, and check for consistency in aspects such as heading formatting and spellings .

Finally, you need to make sure your paper is correctly formatted according to the rules of the citation style you are using. For example, you might need to include an MLA heading  or create an APA title page .

Scribbr’s professional editors can help with the revision process with our award-winning proofreading services.

Discover our paper editing service

Checklist: Research paper

I have followed all instructions in the assignment sheet.

My introduction presents my topic in an engaging way and provides necessary background information.

My introduction presents a clear, focused research problem and/or thesis statement .

My paper is logically organized using paragraphs and (if relevant) section headings .

Each paragraph is clearly focused on one central idea, expressed in a clear topic sentence .

Each paragraph is relevant to my research problem or thesis statement.

I have used appropriate transitions  to clarify the connections between sections, paragraphs, and sentences.

My conclusion provides a concise answer to the research question or emphasizes how the thesis has been supported.

My conclusion shows how my research has contributed to knowledge or understanding of my topic.

My conclusion does not present any new points or information essential to my argument.

I have provided an in-text citation every time I refer to ideas or information from a source.

I have included a reference list at the end of my paper, consistently formatted according to a specific citation style .

I have thoroughly revised my paper and addressed any feedback from my professor or supervisor.

I have followed all formatting guidelines (page numbers, headers, spacing, etc.).

You've written a great paper. Make sure it's perfect with the help of a Scribbr editor!

Open Google Slides Download PowerPoint

Is this article helpful?

Other students also liked.

• Writing a Research Paper Introduction | Step-by-Step Guide
• Writing a Research Paper Conclusion | Step-by-Step Guide
• Research Paper Format | APA, MLA, & Chicago Templates

More interesting articles

• Academic Paragraph Structure | Step-by-Step Guide & Examples
• Checklist: Writing a Great Research Paper
• How to Create a Structured Research Paper Outline | Example
• How to Write a Discussion Section | Tips & Examples
• How to Write Recommendations in Research | Examples & Tips
• How to Write Topic Sentences | 4 Steps, Examples & Purpose
• Research Paper Appendix | Example & Templates
• Research Paper Damage Control | Managing a Broken Argument
• What Is a Theoretical Framework? | Guide to Organizing

What is your plagiarism score?

• MyU : For Students, Faculty, and Staff

Fall 2024 CSCI Special Topics Courses

Cloud computing.

Meeting Time: 09:45 AM‑11:00 AM TTh  Instructor: Ali Anwar Course Description: Cloud computing serves many large-scale applications ranging from search engines like Google to social networking websites like Facebook to online stores like Amazon. More recently, cloud computing has emerged as an essential technology to enable emerging fields such as Artificial Intelligence (AI), the Internet of Things (IoT), and Machine Learning. The exponential growth of data availability and demands for security and speed has made the cloud computing paradigm necessary for reliable, financially economical, and scalable computation. The dynamicity and flexibility of Cloud computing have opened up many new forms of deploying applications on infrastructure that cloud service providers offer, such as renting of computation resources and serverless computing.    This course will cover the fundamentals of cloud services management and cloud software development, including but not limited to design patterns, application programming interfaces, and underlying middleware technologies. More specifically, we will cover the topics of cloud computing service models, data centers resource management, task scheduling, resource virtualization, SLAs, cloud security, software defined networks and storage, cloud storage, and programming models. We will also discuss data center design and management strategies, which enable the economic and technological benefits of cloud computing. Lastly, we will study cloud storage concepts like data distribution, durability, consistency, and redundancy. Registration Prerequisites: CS upper div, CompE upper div., EE upper div., EE grad, ITI upper div., Univ. honors student, or dept. permission; no cr for grads in CSci. Complete the following Google form to request a permission number from the instructor ( https://forms.gle/6BvbUwEkBK41tPJ17 ).

CSCI 5980/8980 

Machine learning for healthcare: concepts and applications.

Meeting Time: 11:15 AM‑12:30 PM TTh  Instructor: Yogatheesan Varatharajah Course Description: Machine Learning is transforming healthcare. This course will introduce students to a range of healthcare problems that can be tackled using machine learning, different health data modalities, relevant machine learning paradigms, and the unique challenges presented by healthcare applications. Applications we will cover include risk stratification, disease progression modeling, precision medicine, diagnosis, prognosis, subtype discovery, and improving clinical workflows. We will also cover research topics such as explainability, causality, trust, robustness, and fairness.

Registration Prerequisites: CSCI 5521 or equivalent. Complete the following Google form to request a permission number from the instructor ( https://forms.gle/z8X9pVZfCWMpQQ6o6  ).

Visualization with AI

Meeting Time: 04:00 PM‑05:15 PM TTh  Instructor: Qianwen Wang Course Description: This course aims to investigate how visualization techniques and AI technologies work together to enhance understanding, insights, or outcomes.

This is a seminar style course consisting of lectures, paper presentation, and interactive discussion of the selected papers. Students will also work on a group project where they propose a research idea, survey related studies, and present initial results.

This course will cover the application of visualization to better understand AI models and data, and the use of AI to improve visualization processes. Readings for the course cover papers from the top venues of AI, Visualization, and HCI, topics including AI explainability, reliability, and Human-AI collaboration.    This course is designed for PhD students, Masters students, and advanced undergraduates who want to dig into research.

Registration Prerequisites: Complete the following Google form to request a permission number from the instructor ( https://forms.gle/YTF5EZFUbQRJhHBYA  ). Although the class is primarily intended for PhD students, motivated juniors/seniors and MS students who are interested in this topic are welcome to apply, ensuring they detail their qualifications for the course.

Visualizations for Intelligent AR Systems

Meeting Time: 04:00 PM‑05:15 PM MW  Instructor: Zhu-Tian Chen Course Description: This course aims to explore the role of Data Visualization as a pivotal interface for enhancing human-data and human-AI interactions within Augmented Reality (AR) systems, thereby transforming a broad spectrum of activities in both professional and daily contexts. Structured as a seminar, the course consists of two main components: the theoretical and conceptual foundations delivered through lectures, paper readings, and discussions; and the hands-on experience gained through small assignments and group projects. This class is designed to be highly interactive, and AR devices will be provided to facilitate hands-on learning.    Participants will have the opportunity to experience AR systems, develop cutting-edge AR interfaces, explore AI integration, and apply human-centric design principles. The course is designed to advance students' technical skills in AR and AI, as well as their understanding of how these technologies can be leveraged to enrich human experiences across various domains. Students will be encouraged to create innovative projects with the potential for submission to research conferences.

Registration Prerequisites: Complete the following Google form to request a permission number from the instructor ( https://forms.gle/Y81FGaJivoqMQYtq5 ). Students are expected to have a solid foundation in either data visualization, computer graphics, computer vision, or HCI. Having expertise in all would be perfect! However, a robust interest and eagerness to delve into these subjects can be equally valuable, even though it means you need to learn some basic concepts independently.

Sustainable Computing: A Systems View

Meeting Time: 09:45 AM‑11:00 AM  Instructor: Abhishek Chandra Course Description: In recent years, there has been a dramatic increase in the pervasiveness, scale, and distribution of computing infrastructure: ranging from cloud, HPC systems, and data centers to edge computing and pervasive computing in the form of micro-data centers, mobile phones, sensors, and IoT devices embedded in the environment around us. The growing amount of computing, storage, and networking demand leads to increased energy usage, carbon emissions, and natural resource consumption. To reduce their environmental impact, there is a growing need to make computing systems sustainable. In this course, we will examine sustainable computing from a systems perspective. We will examine a number of questions:   • How can we design and build sustainable computing systems?   • How can we manage resources efficiently?   • What system software and algorithms can reduce computational needs?    Topics of interest would include:   • Sustainable system design and architectures   • Sustainability-aware systems software and management   • Sustainability in large-scale distributed computing (clouds, data centers, HPC)   • Sustainability in dispersed computing (edge, mobile computing, sensors/IoT)

Registration Prerequisites: This course is targeted towards students with a strong interest in computer systems (Operating Systems, Distributed Systems, Networking, Databases, etc.). Background in Operating Systems (Equivalent of CSCI 5103) and basic understanding of Computer Networking (Equivalent of CSCI 4211) is required.

• Future undergraduate students
• Future transfer students
• Future graduate students
• Future international students
• Diversity and Inclusion Opportunities
• Learn abroad
• Living Learning Communities
• Mentor programs
• Programs for women
• Student groups
• Visit, Apply & Next Steps
• Information for current students
• Departments and majors overview
• Departments
• Undergraduate majors
• Graduate programs
• Integrated Degree Programs
• Additional degree-granting programs
• Online learning
• Academic Advising overview
• Academic Advising FAQ
• Academic Advising Blog
• Appointments and drop-ins
• Academic support
• Commencement
• Four-year plans
• Honors advising
• Policies, procedures, and forms
• Career Services overview
• Resumes and cover letters
• Jobs and internships
• Interviews and job offers
• CSE Career Fair
• Major and career exploration
• Graduate school
• Collegiate Life overview
• Scholarships
• Diversity & Inclusivity Alliance
• Anderson Student Innovation Labs
• Information for alumni
• Get engaged with CSE
• Upcoming events
• CSE Alumni Society Board
• Alumni volunteer interest form
• Golden Medallion Society Reunion
• 50-Year Reunion
• Alumni honors and awards
• Outstanding Achievement
• Alumni Service
• Distinguished Leadership
• Honorary Doctorate Degrees
• Nobel Laureates
• Alumni resources
• Alumni career resources
• Alumni news outlets
• CSE branded clothing
• International alumni resources
• Inventing Tomorrow magazine
• Update your info
• CSE giving overview
• Why give to CSE?
• College priorities
• Give online now
• External relations
• Giving priorities
• Donor stories
• Impact of giving
• Ways to give to CSE
• Matching gifts
• CSE directories
• Invest in your company and the future
• Recruit our students
• Connect with researchers
• K-12 initiatives
• Diversity initiatives
• Research news
• Give to CSE
• CSE priorities
• Corporate relations
• Information for faculty and staff
• Administrative offices overview
• Office of the Dean
• Academic affairs
• Finance and Operations
• Communications
• Human resources
• Undergraduate programs and student services
• CSE Committees
• CSE policies overview
• Academic policies
• Faculty hiring and tenure policies
• Finance policies and information
• Graduate education policies
• Human resources policies
• Research policies
• Research overview
• Research centers and facilities
• Research proposal submission process
• Research safety
• Award-winning CSE faculty
• National academies
• University awards
• Honorary professorships
• Collegiate awards
• Other CSE honors and awards
• Staff awards
• Performance Management Process
• Work. With Flexibility in CSE
• K-12 outreach overview
• Summer camps
• Outreach events
• Enrichment programs
• Field trips and tours
• CSE K-12 Virtual Classroom Resources
• Educator development
• Sponsor an event

Read our research on: Gun Policy | International Conflict | Election 2024

Regions & Countries

Political typology quiz.

Notice: Beginning April 18th community groups will be temporarily unavailable for extended maintenance. Thank you for your understanding and cooperation.

Where do you fit in the political typology?

Are you a faith and flag conservative progressive left or somewhere in between.

Take our quiz to find out which one of our nine political typology groups is your best match, compared with a nationally representative survey of more than 10,000 U.S. adults by Pew Research Center. You may find some of these questions are difficult to answer. That’s OK. In those cases, pick the answer that comes closest to your view, even if it isn’t exactly right.

About Pew Research Center Pew Research Center is a nonpartisan fact tank that informs the public about the issues, attitudes and trends shaping the world. It conducts public opinion polling, demographic research, media content analysis and other empirical social science research. Pew Research Center does not take policy positions. It is a subsidiary of The Pew Charitable Trusts .