journal format thesis sample

Preparing a journal-style thesis

A journal-style thesis incorporates one or more chapters in a format suitable for publication (but not necessarily published) in a peer-reviewed title, with a supporting commentary. 

Examples of suitable formats include journal papers, book chapters, or any discipline-specific alternatives.

A journal-style thesis must be a coherent body of interrelated work (not a series of disconnected papers or other works) and present research of an equivalent originality, quality and volume as a monograph thesis.

Can I submit a journal-style thesis?

If your school, department or centre permits journal-style theses this will be noted within your departmental PGR handbook. The handbook should also include any additional department-specific requirements or guidance, eg with respect to publication status, the number of papers, choice of journals, and co-authorship.   Unless specified by your school, department or centre there is no requirement for papers in a journal-style thesis to be published (or in progress towards publication). 

You should make the decision about whether to submit a journal-style thesis in consultation with your supervisor(s) and Thesis Advisory Panel (TAP). You can change your mind about the nature of your thesis up to the point of submission.   

[email protected] +44 (0)1904 325962 Student Hub, Information Centre Basement, Market Square

Related links

• How to format a journal-style thesis
• How a journal-style thesis is examined
• Guidance on journal-style theses for schools, departments or centres

For you, as a PGR, the potential benefits of submitting a journal-style thesis may include:

• getting your research into the public domain as early as possible, which can be important when working in a fast-moving and competitive research area
• having published papers, increasing motivation and enhancing competitiveness within the academic job market 
• writing your thesis throughout your PGR programme, reducing the need for a long continuation (‘writing up’) period at the end and speeding up submission
• providing greater opportunities to practise academic writing and learn other skills associated with writing and submitting papers
• receipt of referee critique on aspects of your work which may help to improve your research and/or academic writing 
• demonstrating the quality of your work where papers have been through a robust peer-review process (although this cannot predict the outcome of your final examination).

A journal-style thesis will not be appropriate for all disciplines (such as those where a monograph thesis is still the benchmark), nor for all types of research projects (for example where the bulk of publishable results/material is likely to come towards the end of a PGR programme). Currently, journal-style theses are not uncommon in certain sub-disciplines in the sciences and social sciences, but are rare in the majority of the arts and humanities.

You and your supervisor(s) should also be aware of the possible dangers of focusing on published or accepted papers as this could potentially slow down the research and/or writing process if you have to undergo several rounds of revisions and/or focus on a single paper (and associated research) to the exclusion of your wider research project. 

Items to consider

If you are considering a journal-style thesis you should:

• Check that this option is permitted within your department.
• Read the University requirements for journal-style theses (this webpage).
• Note any department-specific requirements (you must adhere to these) or guidance (recommended practice you are encouraged to follow).
• You should also check if your funder/sponsor has an open access policy, which may influence which journals you are able to submit to.
• Discuss your plans at the earliest opportunity (ideally before the first review of progress if a PhD or MPhil PGR) with your supervisor(s) and Thesis Advisory Panel (TAP).
• Look at examples of journal-style and monograph theses produced within your department (if available).
• Read the University's guidance on how to correctly format a journal-style thesis .
• Explore any training needs (normally as part of your   Training Needs Analysis ).
• Consider drafting an outline publication strategy to inform your thinking.
• Ensure that any discussion about the nature of your thesis is recorded on SkillsForge.
• Note that you are submitting a journal-style thesis on your intention to submit form.

Additional guidance for journal-style theses

Guidance for departments

• Publication Process

How to Write a Journal Article from a Thesis

• 3 minute read

Table of Contents

You are almost done with your PhD thesis and want to convert it into a journal article. Or, you’re initiating a career as a journal writer and intend to use your thesis as a starting point for an article. Whatever your situation, turning a thesis into a journal article is a logical step and a process that eventually every researcher completes. But…how to start?

The first thing to know about converting a thesis into a journal article is how different they are:

Thesis Characteristics:

• Meets academic requirements
• Reviewed by select committee members
• Contains chapters
• Lengthy, no word limits
• Table of contents
• Lengthy research of literature
• IRB approval described in detail
• Description and copies of tools used
• All findings presented
• Verb tenses may vary

Journal Article Characteristics:

• Meets journalistic standards
• Reviewed by a panel of “blind” reviewers
• Word limits
• Manuscript format
• Succinct research of literature
• IRB described in 1 to 3 sentences
• Essential and succinct tool information
• Selected findings presented
• Verb tenses are fairly consistent

Converting your thesis to a journal article may be complex, but it’s not impossible.

A thesis is a document of academic nature, so it’s more detailed in content. A journal article, however, is shorter, highlighting key points in a more succinct format. Adapting a thesis for conversion into a journal article is a time-consuming and intricate process that can take you away from other important work. In that case, Elsevier’s Language Editing services may help you focus on important matters and provide a high-quality text for submission in no time at all.

If you are going to convert a thesis into a journal article, with or without professional help, here is a list of some of the steps you will likely have to go through:

1. Identify the best journal for your work

• Ensure that your article is within the journal’s aim and scope. How to find the right journal? Find out more .
• Check the journal’s recommended structure and reference style

2. Shorten the length of your thesis

• Treat your thesis as a separate work
• Paraphrase but do not distort meaning
• Select and repurpose parts of your thesis

3. Reformat the introduction as an abstract

• Shorten the introduction to 100-150 words, but maintain key topics to hold the reader’s attention.
• Use the introduction and discussion as basis for the abstract

4. Modify the introduction

• If your thesis has more than one research question or hypothesis, which are not all relevant for your paper, consider combining your research questions or focusing on just one for the article
• Use previously published papers (at least three) from the target journal as examples

5. Tighten the methods section

• Keep the discussion about your research approach short

6. Report main findings in the results

• Expose your main findings in the results section in concise statements

7. Discussion must be clear and concise

• Begin by providing an interpretation of your results: “What is it that we have learned from your research?”
• Situate the findings to the literature
• Discuss how your findings expand known or previous perspectives
• Briefly present ways in which future studies can build upon your work and address limitations in your study

8. Limit the number of references

• To choose the most relevant and recent
• To format them correctly
• Consider using a reference manager system (e.g. Mendeley ) to make your life easier

If you are not a proficient English speaker, the task of converting a thesis into a journal article might make it even more difficult. At Elsevier’s Language Editing services we ensure that your manuscript is written in correct scientific English before submission. Our professional proofers and editors check your manuscript in detail, taking your text as our own and with the guarantee of maximum text quality.

Language editing services by Elsevier Author Services:

• Research Process

How to Choose a Journal to Submit an Article

• Publication Recognition

How to Submit a Paper for Publication in a Journal

You may also like.

How to Write a Cover Letter for Your Manuscript? Here are the Tips and Examples

Publishing Biomedical Research: What Rules Should You Follow?

Writing an Effective Cover Letter for Manuscript Resubmission

Journal Acceptance Rates: Everything You Need to Know

Research Data Storage and Retention

How to Find and Select Reviewers for Journal Articles

How to Request the Addition of an Extra Author Before Publication

Paper Rejection: Common Reasons

Input your search keywords and press Enter.

• Privacy Policy

Home » Thesis Format – Templates and Samples

Thesis Format – Templates and Samples

Table of contents.

Thesis Format

Thesis format refers to the structure and layout of a research thesis or dissertation. It typically includes several chapters, each of which focuses on a particular aspect of the research topic .

The exact format of a thesis can vary depending on the academic discipline and the institution, but some common elements include:

Introduction

Literature review, methodology.

The title page is the first page of a thesis that provides essential information about the document, such as the title, author’s name, degree program, university, and the date of submission. It is considered as an important component of a thesis as it gives the reader an initial impression of the document’s content and quality.

The typical contents of a title page in a thesis include:

• The title of the thesis: It should be concise, informative, and accurately represent the main topic of the research.
• Author’s name: This should be written in full and should be the same as it appears on official university records.
• Degree program and department: This should specify the type of degree (e.g., Bachelor’s, Master’s, or Doctoral) and the field of study (e.g., Computer Science, Psychology, etc.).
• University: The name of the university where the thesis is being submitted.
• Date of submission : The month and year of submission of the thesis.
• Other details that can be included on the title page include the name of the advisor, the name of the committee members, and any acknowledgments.

In terms of formatting, the title page should be centered horizontally and vertically on the page, with a consistent font size and style. The page margin for the title page should be at least 1 inch (2.54 cm) on all sides. Additionally, it is common practice to include the university logo or crest on the title page, and this should be placed appropriately.

Title of the Thesis in Title Case by Author’s Full Name in Title Case

A thesis submitted in partial fulfillment of the requirements for the degree of Master of Science in Department Name at the University Name

Month Year of Submission

An abstract is a brief summary of a thesis or research paper that provides an overview of the main points, methodology, and findings of the study. It is typically placed at the beginning of the document, after the title page and before the introduction.

The purpose of an abstract is to provide readers with a quick and concise overview of the research paper or thesis. It should be written in a clear and concise language, and should not contain any jargon or technical terms that are not easily understood by the general public.

Here’s an example of an abstract for a thesis:

Title: The Impact of Social Media on Mental Health among Adolescents

This study examines the impact of social media on mental health among adolescents. The research utilized a survey methodology and collected data from a sample of 500 adolescents aged between 13 and 18 years. The findings reveal that social media has a significant impact on mental health among adolescents, with frequent use of social media associated with higher levels of anxiety, depression, and low self-esteem. The study concludes that there is a need for increased awareness and education on the risks associated with excessive use of social media, and recommends strategies for promoting healthy social media habits among adolescents.

In this example, the abstract provides a concise summary of the thesis by highlighting the main points, methodology, and findings of the study. It also provides a clear indication of the significance of the study and its implications for future research and practice.

A table of contents is an essential part of a thesis as it provides the reader with an overview of the entire document’s structure and organization.

Here’s an example of how a table of contents might look in a thesis:

TABLE OF CONTENTS

I. INTRODUCTION ……………………………………………………..1

A. Background of the Study………………………………………..1

B. Statement of the Problem……………………………………….2

C. Objectives of the Study………………………………………..3

D. Research Questions…………………………………………….4

E. Significance of the Study………………………………………5

F. Scope and Limitations………………………………………….6

G. Definition of Terms……………………………………………7

II. LITERATURE REVIEW. ………………………………………………8

A. Overview of the Literature……………………………………..8

B. Key Themes and Concepts………………………………………..9

C. Gaps in the Literature………………………………………..10

D. Theoretical Framework………………………………………….11

III. METHODOLOGY ……………………………………………………12

A. Research Design………………………………………………12

B. Participants and Sampling……………………………………..13

C. Data Collection Procedures…………………………………….14

D. Data Analysis Procedures………………………………………15

IV. RESULTS …………………………………………………………16

A. Descriptive Statistics…………………………………………16

B. Inferential Statistics…………………………………………17

V. DISCUSSION ………………………………………………………18

A. Interpretation of Results………………………………………18

B. Discussion of Finding s …………………………………………19

C. Implications of the Study………………………………………20

VI. CONCLUSION ………………………………………………………21

A. Summary of the Study…………………………………………..21

B. Limitations of the Study……………………………………….22

C. Recommendations for Future Research……………………………..23

REFERENCES …………………………………………………………….24

APPENDICES …………………………………………………………….26

As you can see, the table of contents is organized by chapters and sections. Each chapter and section is listed with its corresponding page number, making it easy for the reader to navigate the thesis.

The introduction is a critical part of a thesis as it provides an overview of the research problem, sets the context for the study, and outlines the research objectives and questions. The introduction is typically the first chapter of a thesis and serves as a roadmap for the reader.

Here’s an example of how an introduction in a thesis might look:

Introduction:

The prevalence of obesity has increased rapidly in recent decades, with more than one-third of adults in the United States being classified as obese. Obesity is associated with numerous adverse health outcomes, including cardiovascular disease, diabetes, and certain cancers. Despite significant efforts to address this issue, the rates of obesity continue to rise. The purpose of this study is to investigate the relationship between lifestyle behaviors and obesity in young adults.

The study will be conducted using a mixed-methods approach, with both qualitative and quantitative data collection methods. The research objectives are to:

• Examine the relationship between lifestyle behaviors and obesity in young adults.
• Identify the key lifestyle factors that contribute to obesity in young adults.
• Evaluate the effectiveness of current interventions aimed at preventing and reducing obesity in young adults.

The research questions that will guide this study are:

• What is the relationship between lifestyle behaviors and obesity in young adults?
• Which lifestyle factors are most strongly associated with obesity in young adults?
• How effective are current interventions aimed at preventing and reducing obesity in young adults?

By addressing these research questions, this study aims to contribute to the understanding of the factors that contribute to obesity in young adults and to inform the development of effective interventions to prevent and reduce obesity in this population.

A literature review is a critical analysis and evaluation of existing literature on a specific topic or research question. It is an essential part of any thesis, as it provides a comprehensive overview of the existing research on the topic and helps to establish the theoretical framework for the study. The literature review allows the researcher to identify gaps in the current research, highlight areas that need further exploration, and demonstrate the importance of their research question.

April 9, 2023:

A search on Google Scholar for “Effectiveness of Online Learning during the COVID-19 Pandemic” yielded 1,540 results. Upon reviewing the first few pages of results, it is evident that there is a significant amount of literature on the topic. A majority of the studies focus on the experiences and perspectives of students and educators during the transition to online learning due to the pandemic.

One recent study published in the Journal of Educational Technology & Society (Liu et al., 2023) found that students who were already familiar with online learning tools and platforms had an easier time adapting to online learning than those who were not. However, the study also found that students who were not familiar with online learning tools were able to adapt with proper support from their teachers and institutions.

Another study published in Computers & Education (Tang et al., 2023) compared the academic performance of students in online and traditional classroom settings during the pandemic. The study found that while there were no significant differences in the grades of students in the two settings, students in online classes reported higher levels of stress and lower levels of satisfaction with their learning experience.

Methodology in a thesis refers to the overall approach and systematic process that a researcher follows to collect and analyze data in order to answer their research question(s) or achieve their research objectives. It includes the research design, data collection methods, sampling techniques, data analysis procedures, and any other relevant procedures that the researcher uses to conduct their research.

For example, let’s consider a thesis on the impact of social media on mental health among teenagers. The methodology for this thesis might involve the following steps:

Research Design:

The researcher may choose to conduct a quantitative study using a survey questionnaire to collect data on social media usage and mental health among teenagers. Alternatively, they may conduct a qualitative study using focus group discussions or interviews to gain a deeper understanding of the experiences and perspectives of teenagers regarding social media and mental health.

Sampling Techniques:

The researcher may use random sampling to select a representative sample of teenagers from a specific geographic location or demographic group, or they may use purposive sampling to select participants who meet specific criteria such as age, gender, or mental health status.

Data Collection Methods:

The researcher may use an online survey tool to collect data on social media usage and mental health, or they may conduct face-to-face interviews or focus group discussions to gather qualitative data. They may also use existing data sources such as medical records or social media posts.

Data Analysis Procedures:

The researcher may use statistical analysis techniques such as regression analysis to examine the relationship between social media usage and mental health, or they may use thematic analysis to identify key themes and patterns in the qualitative data.

Ethical Considerations: The researcher must ensure that their research is conducted in an ethical manner, which may involve obtaining informed consent from participants, protecting their confidentiality, and ensuring that their rights and welfare are respected.

In a thesis, the “Results” section typically presents the findings of the research conducted by the author. This section typically includes both quantitative and qualitative data, such as statistical analyses, tables, figures, and other relevant data.

Here are some examples of how the “Results” section of a thesis might look:

Example 1: A quantitative study on the effects of exercise on cardiovascular health

In this study, the author conducts a randomized controlled trial to investigate the effects of exercise on cardiovascular health in a group of sedentary adults. The “Results” section might include tables showing the changes in blood pressure, cholesterol levels, and other relevant indicators in the exercise and control groups over the course of the study. The section might also include statistical analyses, such as t-tests or ANOVA, to demonstrate the significance of the results.

Example 2: A qualitative study on the experiences of immigrant families in a new country

In this study, the author conducts in-depth interviews with immigrant families to explore their experiences of adapting to a new country. The “Results” section might include quotes from the interviews that illustrate the participants’ experiences, as well as a thematic analysis that identifies common themes and patterns in the data. The section might also include a discussion of the implications of the findings for policy and practice.

A thesis discussion section is an opportunity for the author to present their interpretation and analysis of the research results. In this section, the author can provide their opinion on the findings, compare them with other literature, and suggest future research directions.

For example, let’s say the thesis topic is about the impact of social media on mental health. The author has conducted a survey among 500 individuals and has found that there is a significant correlation between excessive social media use and poor mental health.

In the discussion section, the author can start by summarizing the main findings and stating their interpretation of the results. For instance, the author may argue that excessive social media use is likely to cause mental health problems due to the pressure of constantly comparing oneself to others, fear of missing out, and cyberbullying.

Next, the author can compare their results with other studies and point out similarities and differences. They can also identify any limitations in their research design and suggest future directions for research.

For example, the author may point out that their study only measured social media use and mental health at one point in time, and it is unclear whether one caused the other or whether there are other confounding factors. Therefore, they may suggest longitudinal studies that follow individuals over time to better understand the causal relationship.

Writing a conclusion for a thesis is an essential part of the overall writing process. The conclusion should summarize the main points of the thesis and provide a sense of closure to the reader. It is also an opportunity to reflect on the research process and offer suggestions for further study.

Here is an example of a conclusion for a thesis:

After an extensive analysis of the data collected, it is evident that the implementation of a new curriculum has had a significant impact on student achievement. The findings suggest that the new curriculum has improved student performance in all subject areas, and this improvement is particularly notable in math and science. The results of this study provide empirical evidence to support the notion that curriculum reform can positively impact student learning outcomes.

In addition to the positive results, this study has also identified areas for future research. One limitation of the current study is that it only examines the short-term effects of the new curriculum. Future studies should explore the long-term effects of the new curriculum on student performance, as well as investigate the impact of the curriculum on students with different learning styles and abilities.

Overall, the findings of this study have important implications for educators and policymakers who are interested in improving student outcomes. The results of this study suggest that the implementation of a new curriculum can have a positive impact on student achievement, and it is recommended that schools and districts consider curriculum reform as a means of improving student learning outcomes.

References in a thesis typically follow a specific format depending on the citation style required by your academic institution or publisher.

Below are some examples of different citation styles and how to reference different types of sources in your thesis:

In-text citation format: (Author, Year)

Reference list format for a book: Author, A. A. (Year of publication). Title of work: Capital letter also for subtitle. Publisher.

Example: In-text citation: (Smith, 2010) Reference list entry: Smith, J. D. (2010). The art of writing a thesis. Cambridge University Press.

Reference list format for a journal article: Author, A. A., Author, B. B., & Author, C. C. (Year of publication). Title of article. Title of Journal, volume number(issue number), page range.

Example: In-text citation: (Brown, 2015) Reference list entry: Brown, E., Smith, J., & Johnson, L. (2015). The impact of social media on academic performance. Journal of Educational Psychology, 108(3), 393-407.

In-text citation format: (Author page number)

Works Cited list format for a book: Author. Title of Book. Publisher, Year of publication.

Example: In-text citation: (Smith 75) Works Cited entry: Smith, John D. The Art of Writing a Thesis. Cambridge University Press, 2010.

Works Cited list format for a journal article: Author(s). “Title of Article.” Title of Journal, volume number, issue number, date, pages.

Example: In-text citation: (Brown 394) Works Cited entry: Brown, Elizabeth, et al. “The Impact of Social Media on Academic Performance.” Journal of Educational Psychology, vol. 108, no. 3, 2015, pp. 393-407.

Chicago Style

In-text citation format: (Author year, page number)

Bibliography list format for a book: Author. Title of Book. Place of publication: Publisher, Year of publication.

Example: In-text citation: (Smith 2010, 75) Bibliography entry: Smith, John D. The Art of Writing a Thesis. Cambridge: Cambridge University Press, 2010.

Bibliography list format for a journal article: Author. “Title of Article.” Title of Journal volume number, no. issue number (date): page numbers.

Example: In-text citation: (Brown 2015, 394) Bibliography entry: Brown, Elizabeth, John Smith, and Laura Johnson. “The Impact of Social Media on Academic Performance.” Journal of Educational Psychology 108, no. 3 (2015): 393-407.

Reference list format for a book: [1] A. A. Author, Title of Book. City of Publisher, Abbrev. of State: Publisher, year.

Example: In-text citation: [1] Reference list entry: A. J. Smith, The Art of Writing a Thesis. New York, NY: Academic Press, 2010.

Reference list format for a journal article: [1] A. A. Author, “Title of Article,” Title of Journal, vol. x, no. x, pp. xxx-xxx, Month year.

Example: In-text citation: [1] Reference list entry: E. Brown, J. D. Smith, and L. Johnson, “The Impact of Social Media on Academic Performance,” Journal of Educational Psychology, vol. 108, no. 3, pp. 393-407, Mar. 2015.

An appendix in a thesis is a section that contains additional information that is not included in the main body of the document but is still relevant to the topic being discussed. It can include figures, tables, graphs, data sets, sample questionnaires, or any other supplementary material that supports your thesis.

Here is an example of how you can format appendices in your thesis:

• Title page: The appendix should have a separate title page that lists the title, author’s name, the date, and the document type (i.e., thesis or dissertation). The title page should be numbered as the first page of the appendix section.
• Table of contents: If you have more than one appendix, you should include a separate table of contents that lists each appendix and its page number. The table of contents should come after the title page.
• Appendix sections: Each appendix should have its own section with a clear and concise title that describes the contents of the appendix. Each section should be numbered with Arabic numerals (e.g., Appendix 1, Appendix 2, etc.). The sections should be listed in the table of contents.
• Formatting: The formatting of the appendices should be consistent with the rest of the thesis. This includes font size, font style, line spacing, and margins.
• Example: Here is an example of what an appendix might look like in a thesis on the topic of climate change:

Appendix 1: Data Sources

This appendix includes a list of the primary data sources used in this thesis, including their URLs and a brief description of the data they provide.

Appendix 2: Survey Questionnaire

This appendix includes the survey questionnaire used to collect data from participants in the study.

Appendix 3: Additional Figures

This appendix includes additional figures that were not included in the main body of the thesis due to space limitations. These figures provide additional support for the findings presented in the thesis.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Thesis Outline – Example, Template and Writing...

Delimitations in Research – Types, Examples and...

Tables in Research Paper – Types, Creating Guide...

Implications in Research – Types, Examples and...

Dissertation vs Thesis – Key Differences

Thesis – Structure, Example and Writing Guide

Adapting a Dissertation or Thesis Into a Journal Article

Dissertations or theses are typically required of graduate students. Undergraduate students completing advanced research projects may also write senior theses or similar types of papers. Once completed, the dissertation or thesis is often submitted (with modifications) as a manuscript for publication in a scholarly journal. Thus, the dissertation or thesis often provides the foundation for a new researcher’s body of published work.

Writers will first want to determine whether the work in their dissertation or thesis merits publication. If it does, we then provide guidance on how to adapt a dissertation or thesis for submission to a journal.

Adapting a dissertation or thesis into a journal article is covered in the seventh edition APA Style Publication Manual in Section 12.1

Deciding to submit a dissertation or thesis for publication

When deciding whether to publish the work in your dissertation or thesis, first consider whether the findings tell a compelling story or answer important questions. Whereas dissertations and theses may present existing knowledge in conjunction with new work, published research should make a novel contribution to the literature. For example, some of your original research questions might be suitable for publication, and others may have been sufficiently addressed in the literature already. Likewise, some of your results may warrant additional experiments or analyses that could help answer the research questions more fully, and you may want to conduct these analyses before seeking publication.

You may also want to consider such factors as whether the current sample size provides sufficient power to adequately inform the analyses and whether additional analyses might clarify ambiguous findings. Consultation with colleagues can help evaluate the potential of the manuscript for publication as well as the selection of an appropriate journal to which to submit it. For information on selecting and prioritizing a journal (and tips for avoiding predatory or deceptive journals), see Sections 12.2 to 12.4 of the Publication Manual .

Adapting a dissertation or thesis for publication

Once a decision is made to convert your dissertation or thesis into a manuscript for submission to a journal, you will want to focus attention on adapting it for publication. By attending to brevity and focus, writing style, relevant literature review and data analyses, and appropriate interpretation of the results or findings, you can enhance the fit of your manuscript for journal publication. Editors and reviewers readily recognize an article that has been hastily converted; careful attention when reformatting the dissertation or thesis is likely to increase the manuscript’s potential for serious consideration and eventual publication.

There are several steps writers seeking to prepare their dissertation or thesis for publication can take beforehand:

• Look at articles in the field and in relevant journals to see what structure and focus are appropriate for their work and how they are formatted.
• Request and consider the input of advisors, colleagues, or other coauthors who contributed to the research on which the dissertation or thesis is based.
• Review an article submitted to a journal alongside their advisor (with permission from the journal editor) or serve as a reviewer for a student competition to gain firsthand insight into how authors are evaluated when undergoing peer review.

The original research reported in a dissertation and thesis can then be reformatted for journal submission following one of two general strategies: the multiple-paper strategy or the conversion strategy.

Multiple-paper strategy

The quickest strategy for converting (or “flipping”) a dissertation or thesis into one or more publishable articles is to use a multiple-paper format when initially writing the dissertation or thesis. This involves structuring the dissertation or thesis used to fulfill the requirements for a degree as a series of shorter papers that are already formatted for journal submission (or close to it). These papers are usually each the length of a journal article, conceptually similar, and come from the same overarching project—but can stand alone as independent research reports. Consult your university’s editorial office to confirm that this is an approved format for your dissertation or thesis and to obtain the specific guidelines.

Conversion strategy

A second strategy is to reformat and convert a dissertation or thesis into a journal article after completing your dissertation or thesis defense to fit the scope and style of a journal article. This often requires adjustments to the following elements:

• Length: Brevity is an important consideration for a manuscript to be considered for journal publication, particularly in the introduction and Discussion sections. Making a dissertation or thesis publication-ready often involves reducing a document of over 100 pages to one third of its original length. Shorten the overall paper by eliminating text within sections and/or eliminating entire sections. If the work examined several research questions, you may consider separating distinct research questions into individual papers; narrow the focus to a specific topic for each paper.
• Abstract: The abstract may need to be condensed to meet the length requirements of the journal. Journal abstract requirements are usually more limited than college or university requirements. For instance, most APA journals limit the abstract length to 250 words.
• Introduction section: One of the major challenges in reformatting a dissertation or thesis is paring down its comprehensive literature review to a more succinct one suitable for the introduction of a journal article. Limit the introductory text to material relating to the immediate context of your research questions and hypotheses. Eliminate extraneous content or sections that do not directly contribute to readers’ knowledge or understanding of the specific research question(s) or topic(s) under investigation. End with a clear description of the questions, aims, or hypotheses that informed your research.
• Method section: Provide enough information to allow readers to understand how the data were collected and evaluated. Refer readers to previous works that informed the current study’s methods or to supplemental materials instead of providing full details of every step taken or the rationale behind them.
• Results section: Be selective in choosing analyses for inclusion in the Results section and report only the most relevant ones. Although an unbiased approach is important to avoid omitting study data, reporting every analysis that may have been run for the dissertation or thesis often is not feasible, appropriate, or useful in the limited space of a journal article. Instead, ensure that the results directly contribute to answering your original research questions or hypotheses and exclude more ancillary analyses (or include them as supplemental materials). Be clear in identifying your primary, secondary, and any exploratory analyses.
• Discussion section: Adjust the discussion according to the analyses and results you report. Check that your interpretation and application of the findings are appropriate and do not extrapolate beyond the data. A strong Discussion section notes area of consensus with and divergence from previous work, taking into account sample size and composition, effect size, limitations of measurement, and other specific considerations of the study.
• References: Include only the most pertinent references (i.e., theoretically important or recent), especially in the introduction and literature review, rather than providing an exhaustive list. Ensure that the works you cite contribute to readers’ knowledge of the specific topic and to understanding and contextualizing your research. Citation of reviews and meta-analyses can guide interested readers to the broader literature while providing an economical way of referencing prior studies.
• Tables and figures: Make sure that tables or figures are essential and do not reproduce content provided in the text.

• language Search for " " in the Library Website Search the library website
• menu_book Search for " " in Library Search Search Library Search
• The University of Manchester Library

eThesis submission: Journal format theses

A Journal format thesis allows you to incorporate sections that are in a format suitable for submission for publication in a peer-reviewed journal. If you wish to submit your thesis in journal format, you should discuss this with your supervisor, and declare your intention when you complete the Notice of Submission form. See also the University's Presentation of Theses policy for more information:

• Presentation of Theses Policy: http://documents.manchester.ac.uk/DocuInfo.aspx?DocID=7420

If you are submitting a Journal format eThesis, you should select this format in step 2 of 5 of the eThesis submission form.

• Screenshots of the eThesis submission system: http://documents.manchester.ac.uk/DocuInfo.aspx?DocID=32873

Preparing and submitting your journal format thesis

‘Self-archiving’ is where a researcher makes a piece of scholarly work available via a repository. The University’s Presentation of Theses policy requires that final Doctoral theses are ‘self-archived’ and made Open Access via the University’s systems within 12 months of submission, unless an exception to this policy is required.

The structure of a journal format thesis – being comprised of a number of research papers submitted to or published in academic journals – means that you as the author need to take extra care when preparing your thesis for submission, and selecting your preferred access level for your final thesis. For each publisher you’re working with, or plan to work with, you will need to establish what each allows and requires in terms of self-archiving of work, i.e.:

• If my publisher allows me to share my work via a repository, what version of my work can I share?
• When can I share my work via a repository?
• When will my papers be published?

This information will allow you to determine:

• The version of each paper to include in your eThesis file
• The access level option to select for your final thesis

Selecting an access level for your final thesis which reflects the strictest self-archiving policy of the publishers you’re working with will ensure that you’re not infringing any of your publishers’ self-archiving policies or breaking your copyright agreements.

Decision tree: Can I share my Journal format thesis Open Access? 

This interactive guide, accessed via Typeform , aims to help you understand the checks you need to make regarding the self-archiving policies of the publishers you’re working with, and to use this information to inform:

• The version of each article you include in your eThesis file
• The access level you select for your final eThesis

We recommend that you identify the strictest publisher policy that you need to deal with, and use this policy when completing this decision tree.

• Typeform - eThesis submission: journal format theses https://scholarlycomms1.typeform.com/to/bZAErZ

Journal format theses: downloadable guide

If you’d like more detailed information on considerations related to submission of your Journal format thesis, you can also download the eThesis submission: journal format thesis guide . This includes information on publisher self-archiving policies, and how these will inform the versions of papers you include in your thesis submission, and the access level you select for your final thesis.

• eThesis submission: journal format thesis guide 

You can also contact the eThesis Support Service  for more information and support.

• Library services
• Researcher services
• Prepare your eThesis
• Access to your final thesis
• Journal format theses
• Submitting your eThesis
• Sharing your thesis research data

How to format and use a journal template for your research paper

When writing your research paper it is crucial to understand what format your target journal requires, and what journal template you should use (if one at all). Although many of our journals have the basic elements of style in common, each journal can have its own guidelines for formatting. This defines how an article will look when it is published online or in print.

Read on to find out how to format your research paper for submission to your target journal.

How to format your research paper

Go to  Taylor & Francis Online  and search for the title of your chosen journal using the search bar.

Select the relevant journal and click on the instructions for authors tab.

Read your target journal’s instructions for authors, and find out about its formatting guidelines.

Below are a list of Word templates which can be used for many of our journals. Please download the relevant template and apply it to your research paper format.

Each version of the template has its own instructions file. Read the instructions to learn how to save and use the template.

Get familiar with the journal’s instructions for authors

Be prepared, speed up your submission, and make sure nothing is forgotten by understanding the journal’s individual requirements.

Using Taylor & Francis word templates for journal articles

Check to see which version of Word is installed on your computer

Read the instructions for the relevant version of the template in the list below

Download and save the template file to your computer

Apply these styles to your paper as appropriate

Taylor & Francis templates

Format-free submission

Many Taylor & Francis journals allow format-free submission .

If you use a consistent citation format and include all the necessary information, you may be able to submit your work without worrying about formatting your manuscript.

To find out if your journal allows format-free submission, go to your journal’s homepage on Taylor & Francis Online .

Read the instructions for authors’ for your chosen journal to find out if it operates format-free submission.

Submitting your article format-free?

Read our guide for more information on how to submit your article format-free.

Other journal format options

Latex templates.

Some of our journals accept manuscripts that use a LaTeX template.

Please check the instructions for authors on your chosen journal’s homepage on Taylor & Francis Online to know if LaTeX is an accepted format.

Your journal may provide a link to its specific template in the instructions for authors’ section of the journal’s homepage on Taylor & Francis Online.

If no template is provided, please  contact us  for advice.

What is LaTex?

LaTeX is a software system used to design documents for typesetting. It is most often used for mathematicians and researchers in the physical sciences, but it can be used for almost any form of publishing.

It permits advanced formatting of symbols and variables and structuring of formula. LaTeX has to be converted during the document structuring process during typesetting.”

F1000Research

F1000Research publishes different article types offering flexibility in format and structure, although specific requirements may apply to some article types.

You can find out more about article type-specific instructions for submission with F1000Research in the F1000Research Article Guidelines .

To submit to F1000Research, your manuscript can be submitted as:

Word (DOC or DOCX)

Rich text format (RTF) files

What is F1000Research?

This is an Open Research publishing platform offering rapid article publication and other research outputs without editorial bias.

Save time – let us help format your manuscript

Consider using expert editors to help you meet deadlines and make sure your manuscript complies to your target journal’s requirements.

Related resources

Journal manuscript layout guide

Journal submission support

Your submission checklist

Guide to improve your submission experience

Science and Engineering Doctoral Academy

Journal format thesis submission

Submission of a thesis in journal format is an increasingly popular choice and provides you with experience of writing in journal paper formats.

If you think that your thesis would be appropriate for a journal format submission the first step is to discuss this with your supervisory team.

A thesis in journal format comprises sections that are in a format suitable for publication or dissemination. These can be published or submitted papers of chapters that are written as journal papers but are not yet or may never be submitted. Apart from the inclusion of such materials, the journal format thesis must conform to the same standards expected for a standard thesis.

Any work submitted within the journal format thesis must be substantially different from any work which may have previously been submitted for any degree at this or any other institution.

One of the major considerations for submitting in journal format is the level of contribution that you have made to the journal papers to be included in the thesis (where published or submitted papers are used). It would be expected that you will have taken the major role in ALL aspects of production of the papers including: data acquisition, analysis and writing the paper.

As with standard doctoral/MPhil thesis, examiners should satisfy themselves that the journal format thesis meets the requirement of the doctoral degree as prescribed in the appropriate regulations and policies. The fact that a thesis contains material that has been published or accepted for publication does not guarantee that the examiner will recommend the award for which the candidate is being examined.

Approval for submission in journal format

In order to submit a thesis in journal format you should have the approval of your supervisory team. It is not necessary to request approval from the Doctoral Academy. You will be asked to indicate the format of your thesis during the examination process when completing your Notice of Submission Form.

Your supervisory team is best placed to advise on how to structure a thesis in journal format.

The work must constitute a body of publication tending towards a coherent and continuous thesis, rather than a series of disconnected publications. As such, any publications should be adapted and integrated within the structure of the thesis. Any sections of the thesis which are published or in publishable format should be clearly identified.

You should use the introductory section of the thesis to explain and justify in full the nature and extent of your contribution and the contribution of co-authors and the other collaborators to the publications presented. A significant proportion of the researched materials should be derived from original research undertaken after the date you initially registered with this University.

The number of papers included in the journal format thesis may vary according to discipline and is not prescribed, but should reflect the quantity, quality and originality of research and analysis expected of a candidate submitting a standard thesis.

Example structure

It is essential that the journal format thesis includes detailed and critical analysis of the work and methods used, since sections formatted for publication/dissemination may not already include this level of detail. The structure of the journal format thesis should include the following:

• rationale for submitting the thesis in an journal format and an account of how the thesis format has been constructed;
• context of the research which should incorporate sections / chapters defining the rationale of the investigation and the strategy employed during the research as demonstrated in the thesis;
• review of previous research including sections summarising and synthesising previous research in the field of investigation;
• methodology detailing the methods employed during the research and a detailed critique analysis of those methods and the information they provide;
• presentation of results and their analysis in a format suitable for presentation in a peer-reviewed journal and/or in conventional thesis chapters as in the standard PhD thesis;
• summary/conclusion drawing together the various outcomes of the work into a coherent synthesis and indicating directions for future work;
• references and appendices should be included as in the standard PhD thesis.

Co-authored papers

Materials included in the journal format thesis may include those which are solely and/or partly authored by the student and may be already published, accepted for publication, or submitted for publication in externally refereed contexts such as journals and conference proceedings.

You should use the introductory section of the thesis to explain and justify in full the nature and extent of the candidate's own contribution and the contribution of co-authors and other collaborators to the publications presented.

Formatting issues

You should ensure that you have read the guidance on the presentation of a thesis which outlines how to include offprints of published material.

You can also ask the Exams Team in the Doctoral Academy for guidance on presentation and formatting issues. Please contact [email protected] if you require further assistance.

The incorporation of publication-style chapters in the thesis will inevitably lead to some duplication since each publication-style chapter will have self-contained components that will overlap with parts of the other sections of the thesis. As a result, such a thesis might well be expected to be longer than a standard doctoral/MPhil thesis on the same topic.

The maximum length of the journal format doctoral thesis should not normally exceed 90,000 words of main text, including footnotes and endnotes.

The maximum length of the journal format MPhil thesis should not normally exceed 60,000 words, including footnotes and endnotes.

This is as expected for a standard thesis but it is essential that this format of thesis includes detailed and critical analysis of the previous work and methods used because the sections formatted for publication/dissemination may not cover these aspects in the depth expected of a PhD thesis.

For further information on journal format thesis submission see Journal Format Theses - Guiding Principles for Students and Staff

• Langson Library
• Science Library
• Grunigen Medical Library
• Law Library
• Connect From Off-Campus
• Accessibility
• Gateway Study Center

Email this link

Thesis / dissertation formatting manual (2024).

• Filing Fees and Student Status
• Submission Process Overview
• Electronic Thesis Submission
• Paper Thesis Submission
• Formatting Overview
• Fonts/Typeface
• Pagination, Margins, Spacing
• Paper Thesis Formatting
• Preliminary Pages Overview
• Copyright Page
• Dedication Page
• Table of Contents
• List of Figures (etc.)
• Acknowledgements
• Text and References Overview
• Figures and Illustrations
• Using Your Own Previously Published Materials
• Using Copyrighted Materials by Another Author
• Open Access and Embargoes
• Copyright and Creative Commons
• Ordering Print (Bound) Copies
• Tutorials and Assistance
• FAQ This link opens in a new window

UCI Libraries maintains the following  templates to assist in formatting your graduate manuscript. If you are formatting your manuscript in Microsoft Word, feel free to download and use the template. If you would like to see what your manuscript should look like, PDFs have been provided. If you are formatting your manuscript using LaTex, UCI maintains a template on OverLeaf.

• Annotated Template (Dissertation) 2024 PDF of a template with annotations of what to look out for
• Word: Thesis Template 2024 Editable template of the Master's thesis formatting.
• PDF Thesis Template 2024
• Word: Dissertation Template 2024 Editable template of the PhD Dissertation formatting.
• PDF: Dissertation Template 2024
• Overleaf (LaTex) Template
• << Previous: Tutorials and Assistance
• Next: FAQ >>
• Last Updated: May 31, 2024 9:34 AM
• URL: https://guides.lib.uci.edu/gradmanual

Off-campus? Please use the Software VPN and choose the group UCIFull to access licensed content. For more information, please Click here

Software VPN is not available for guests, so they may not have access to some content when connecting from off-campus.

Thesis/Dissertation Templates and Forms

Below you will find Microsoft Word templates and examples you can use for formatting your thesis/dissertation. These files are formatted to meet all the requirements of the Graduate College. Additionally, the templates contain detailed instructions for using them to ensure that your thesis/dissertation is formatted correctly. However, even when using the templates, it is possible to accidentally re-format some content.

For best results, turn on hidden characters by clicking the ¶ (paragraph) symbol in the Home ribbon of Microsoft Word. When pasting text into the template, right-click where you want to paste the text, and then select the “Paste text only” option to clear all formatting attributes from the source document. Use the  formatting checklist  to check that all of your content is formatted according to Graduate College requirements. Finally,  schedule a format check  with a CCE thesis/dissertation consultant to get feedback on your formatting.

Selecting the right template

• The REFERENCES and APPENDICES are at the end of the paper.
• Chapters with content rewritten from previously published journal papers are allowed since they would be considered different from the original publications. Be sure to cite the published works to avoid self-plagiarism. Contact us for clarification. 
• The first chapter must be CHAPTER 1. GENERAL INTRODUCTIONS.
• The last chapter must be CHAPTER X. GENERAL CONCLUSIONS.
• The number of chapters in between will be determined by the POS Committee.
• The "Modified" statement in the template only addresses the changes in the formatting, not content. 
• If you are changing content, e.g. excluding or rewriting subsections, you may be looking at the Traditional Template style. Contact us for clarification. 
• The references and appendices must be included with the respective chapters instead of after the CHAPTER X. GENERAL CONCLUSIONS.
• Select  Journal Article Thesis Template (Single Chapter Only)  if there is only one manuscript or published article
• Fine Arts and Non-Traditional Thesis Dissertation Template : Select this template if your thesis/dissertation requires different typography to meet the discipline's guidelines. For example, a playwright may include different fonts.

Useful Tips

• Starting with the right template instead of copying and pasting from a different document can avoid conflicts in the presets.
• For some disciplines, it can be confusing to choose between the Traditional or Journal Article templates. Contact us for clarification. We will discuss different factors before presenting you with options.
• For best results, turn on hidden characters by clicking the ¶ (paragraph) symbol in the Home ribbon of Microsoft Word. When pasting text into the template, right-click where you want to paste the text, and then select the “Paste text only” option to clear all formatting attributes from the source document.
• Download and use the  Thesis Dissertation Self-Check Formatting Checklist  to check that all of your content is formatted according to Graduate College requirements.
• Schedule a format check  with a CCE thesis/dissertation consultant to get feedback on your formatting.

I. Microsoft Word Templates

Below you will find three Microsoft Word templates and examples you can use for formatting your thesis/dissertation. These files are formatted to meet all the requirements of the Graduate College. Additionally, the templates contain detailed instructions for using them to ensure that your thesis/dissertation is formatted correctly. 

• Traditional  Thesis Dissertation Template  MS Word  |  Adobe PDF
• Please note that this Single-Article Only template cannot be used if the thesis has other research details plus one article/manuscript. For example, if there is a literature review chapter plus a journal-style chapter, the full Journal Article Thesis Dissertation Template must be used, and the literature review chapter must be formatted like a journal-style chapter.
• If unsure which Journal Article template to use, please check with Lily Compton,  [email protected] .
• Fine Arts/Non-Traditional  Thesis Dissertation Template  MS Word * | Adobe PDF 

(*This is a draft template. Some instructions may not reflect the final formatting guideline. Please make  an appointment for a Format Check .)

Quick access to  Thesis Dissertation Self-Check Formatting Checklist

II. LaTex Templates

All Iowa State University students, faculty and staff are entitled to claim a Professional Overleaf account, using LaTex for writing and publishing their projects, presentations, and research papers.  Claim your account here . If you already have an Overleaf free account, you can use your ISU e-mail to establish a Professional account.

Templates are also provided below for theses and dissertations formatted in LaTeX.

• Visit  ISU’s Overleaf website   to retrieve the most current updates on the style and class files.
• Follow the instructions and comments in the template to avoid adding conflicting lines of code.
• Check for common issues from this  FAQ page .

Additional LaTex Resources

• FAQ Isuthesis

Templates for forms are also provided below.

• SHARED CONSENT FORM

The Shared Consent Form should be included as an Appendix if a thesis/dissertation chapter is co-authored by two or more graduate students who may also include the same chapter in their theses/dissertations. If student co-authors do not intend to include the manuscript as a chapter in their theses/dissertations, this form is not required. Students should discuss with their major professors and follow the instructions within the templates.

• Shared Consent Form (Template 1: by percentages)  MS Word  |  Adobe PDF
• Shared Consent Form (Template 2: by roles)  MS Word  |  Adobe PDF

NOTE: If the student and major professor decide that the form is not required, be sure to indicate it under "Student Notes to Administrator" when submitting the thesis/dissertation in ProQuest.

• PUBLISHING AGREEMENT

The Publishing Agreement will be provided to graduate students at the time they create a new submission in ProQuest. It is important that graduate students review the publishing agreement while they are preparing their theses/dissertations because they will need to obtain all necessary permissions for third-party content.

Examples of materials created or owned by third parties include but are not limited to photographs, extensive quotations, figures, and tables. Previous publications may also require permission from the journal or book publisher if copyright has been transferred.

• Publishing Agreement

NOTE: No signatures are necessary for this publication agreement. Graduate students should review the document early so that they are prepared to fully accept the terms when they are ready to create a new submission in ProQuest. They must check the box in ProQuest next to the statement [I have read, understand, and agree to this University Agreement] before they can proceed to upload their submission.

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

• View all journals
• Explore content
• About the journal
• Publish with us
• Sign up for alerts

Formatting guide

This guide describes how to prepare contributions for submission. We recommend you read this in full if you have not previously submitted a contribution to Nature . We also recommend that, before submission, you familiarize yourself with Nature ’s style and content by reading the journal, either in print or online, particularly if you have not submitted to the journal recently.

Formats for Nature contributions

Articles are the main format for original research contributions to Nature . In addition, Nature publishes other submitted material as detailed below.

Articles are original reports whose conclusions represent a substantial advance in understanding of an important problem and have immediate, far-reaching implications. In print, physical sciences papers do not normally exceed 6 pages on average, and biological, clinical and social-sciences papers do not normally exceed 8 pages on average. However, the final print length is at the editor’s discretion.

Articles start with a fully referenced summary paragraph, ideally of no more than 200 words, which is separate from the main text and avoids numbers, abbreviations, acronyms or measurements unless essential. It is aimed at readers outside the discipline. This summary paragraph should be structured as follows: 2-3 sentences of basic-level introduction to the field; a brief account of the background and rationale of the work; a statement of the main conclusions (introduced by the phrase 'Here we show' or its equivalent); and finally, 2-3 sentences putting the main findings into general context so it is clear how the results described in the paper have moved the field forwards. Please refer to our annotated example   to see how the summary paragraph should be constructed.

The typical length of a 6-page article with 4 modest display items (figures and tables) is 2500 words (summary paragraph plus body text). The typical length of an 8-page article with 5-6 modest display items is 4300 words. A ‘modest’ display item is one that, with its legend, occupies about a quarter of a page (equivalent to ~270 words). If a composite figure (with several panels) needs to occupy at least half a page in order for all the elements to be visible, the text length may need to be reduced accordingly to accommodate such figures. Keep in mind that essential but technical details can be moved into the Methods or Supplementary Information.

As a guideline, articles typically have no more than 50 references. (There is no such constraint on any additional references associated with Methods or Supplementary Information.)

Sections are separated with subheadings to aid navigation. Subheadings may be up to 40 characters (including spaces).

Word counts refer to the text of the paper. Title, author list, acknowledgements and references are not included in total word counts.

Matters Arising and Corrections

Matters Arising are exceptionally interesting or important comments and clarifications on original research papers or other peer-reviewed material published within the past 18 months in Nature . They are published online but not in print.

For further details of and instructions for how to submit such comments on peer-reviewed material published in Nature — or to notify editors of the potential need for a correction — please consult our Matters Arising page.

Other contributions to Nature

Please access the other submitted material pages for further details on any of the contribution types below:

News and Comment

Correspondence

Books & Arts

News & Views

Insights, Reviews and Perspectives

Technology Features

The editorial process

See this section for an explanation of Nature 's editorial criteria for publication, refereeing policy and how editors handle papers after submission. Submission to a Nature journal is taken by the journal to mean that all the listed authors have agreed to all of the contents. See authorship policy for more details.

Presubmission enquiries

If you wish to enquire whether your Article might be suitable for consideration by Nature , please use our online presubmission enquiry service . All presubmission enquiries must include a cover paragraph to the editor stating the interest to a broad scientific readership, a fully referenced summary paragraph, and a reference list.

Readability

Nature is an international journal covering all the sciences. Contributions should therefore be written clearly and simply so that they are accessible to readers in other disciplines and to readers for whom English is not their first language. Thus, technical jargon should be avoided as far as possible and clearly explained where its use is unavoidable. Abbreviations, particularly those that are not standard, should also be kept to a minimum. The background, rationale and main conclusions of the study should be clearly explained. Titles and abstracts in particular should be written in language that will be readily intelligible to any scientist. Essential but specialized terms should be explained concisely but not didactically.

For gene, protein and other specialized names authors can use their preferred terminology so long as it is in current use by the community, but they must give all known names for the entity at first use in the paper. Nature prefers authors to use internationally agreed nomenclature. Papers containing new or revised formal taxonomic nomenclature for animals, whether living or extinct, are accepted conditional on the provision of LSIDs (Life Science Identifiers) by means of registration of such nomenclature with ZooBank, the proposed online registration system for the International Code of Zoological Nomenclature (ICZN).

Even though no paper will be rejected because of poor language, non–native English speakers occasionally receive feedback from editors and reviewers regarding language and grammar usage in their manuscripts. You may wish to consider asking colleagues to read your manuscript and/or to use a professional editing service such as those provided by our affiliates Nature Research Editing Service or American Journal Experts . You can also get a fast, free grammar check of your manuscript that takes into account all aspects of readability in English. Please note that the use of a language editing service is not a requirement for publication in Nature .

Nature 's editors provide detailed advice about the expected print length when asking for the final version of the manuscript. Nature 's editors often suggest revised titles and rewrite the summary paragraphs of Articles so the conclusions are clear to a broad readership.

After acceptance, Nature 's subeditors (copyeditors) ensure that the text and figures are readable and clear to those outside the field, and edit papers into Nature 's house style. They pay particular attention to summary paragraphs, overall clarity, figures, figure legends and titles.

Proofs are sent before publication; authors are welcome to discuss proposed changes with Nature 's subeditors, but Nature reserves the right to make the final decision about matters of style and the size of figures.

A useful set of articles providing general advice about writing and submitting scientific papers can be found on the SciDev.Net website.

Format of Articles

Contributions should be double-spaced and written in English (spellings as in the Oxford English Dictionary ).

Contributions should be organized in the sequence: title, authors, affiliations (plus present addresses), bold first paragraph, main text, main references, tables, figure legends, methods (including separate data and code availability statements), methods references, acknowledgements, author contributions, competing interest declaration, additional information (containing supplementary information line (if any) and corresponding author line), extended data figure/table legends. In order to facilitate the review process, for initial submissions we encourage authors to present the manuscript text and figures together in a single file (Microsoft Word or PDF, up to 30 MB in size). The figures may be inserted within the text at the appropriate positions or grouped at the end, and each figure legend should be presented together with its figure. Also, please include line numbers within the text.

Titles do not exceed two lines in print. This equates to 75 characters (including spaces). Titles do not normally include numbers, acronyms, abbreviations or punctuation. They should include sufficient detail for indexing purposes but be general enough for readers outside the field to appreciate what the paper is about.

An uninterrupted page of text contains about 1250 words.

A typical 6-page Article contains about 2,500 words of text and, additionally, 4 modest display items (figures and/or tables) with brief legends, reference list and online-only methods section if applicable. A composite figure (with several panels) usually needs to take about half a page, equivalent to about 600 words, in order for all the elements to be visible (see section 5.9 for instructions on sizing figures).

A typical 8-page Article contains about 4300 words of text and, additionally, 5-6 modest display items (figures and/or tables) with brief legends, reference list and online-only methods section if applicable. A composite figure (with several panels) usually needs to take about half a page, equivalent to about 600 words, in order for all the elements to be visible (see section 5.9 for instructions on sizing figures).

Authors of contributions that significantly exceed the limits stated here (or as specified by the editor) will have to shorten their papers before acceptance, inevitably delaying publication.

Nature requires authors to specify the contribution made by their co-authors in the end notes of the paper (see section 5.5). If authors regard it as essential to indicate that two or more co-authors are equal in status, they may be identified by an asterisk symbol with the caption ‘These authors contributed equally to this work’ immediately under the address list. If more than three co-authors are equal in status, this should be indicated in the author contributions statement. Present addresses appear immediately below the author list (below the footnote rule at the bottom of the first page) and may be identified by a dagger symbol; all other essential author-related explanation is placed in the acknowledgements.

Our preferred format for text is Microsoft Word, with the style tags removed.

TeX/LaTeX: If you have prepared your paper using TeX/LaTeX, we will need to convert this to Word after acceptance, before your paper can be typeset. All textual material of the paper (including references, tables, figure captions, online methods, etc.) should be included as a single .tex file.

We prefer the use of a ‘standard’ font, preferably 12-point Times New Roman. For mathematical symbols, Greek letters and other special characters, use normal text or Symbol font. Word Equation Editor/MathType should be used only for formulae that cannot be produced using normal text or Symbol font.

The ‘Methods’ section is in the main text file, following the figure legends. This Methods section will appear in the PDF and in the full-text (HTML) version of the paper online, but will not appear in the printed issue. The Methods section should be written as concisely as possible but should contain all elements necessary to allow interpretation and replication of the results. As a guideline, the Methods section does not typically exceed 3,000 words. To increase reproducibility, authors are encouraged to deposit a detailed description of protocols used in their study in a protocol sharing platform of their choice. Springer Nature’s protocols.io is a free and open service designed to help researchers share experimental know-how. Protocols deposited by the authors in www.protocols.io will be linked to the online Methods section upon publication

Detailed descriptions of methods already published should be avoided; a reference number can be provided to save space, with any new addition or variation stated.

The Methods section should be subdivided by short bold headings referring to methods used and we encourage the inclusion of specific subsections for statistics, reagents and animal models. If further references are included in this section their numbering should continue from the end of the last reference number in the rest of the paper and they are listed after the Methods section.

Please provide separate Data Availability and Code Availability statements after the main text statements and before the Extended Data legends; detailed guidance can be found in our data availability and data citations policy . Certain data types must be deposited in an appropriate public structured data depository (details are available here ), and the accession number(s) provided in the manuscript. Full access is required at the time of publication. Should full access to data be required for peer review, authors must provide it.

The Methods section cannot contain figures or tables (essential display items should be included in the Extended Data or exceptionally in the Supplementary Information).

References are each numbered, ordered sequentially as they appear in the text, tables, boxes, figure legends, Methods, Extended Data tables and Extended Data figure legends.

When cited in the text, reference numbers are superscript, not in brackets unless they are likely to be confused with a superscript number.

Do not use linked fields (produced by EndNote and similar programs). Please use the one-click button provided by EndNote to remove EndNote codes before saving your file.

As a guideline, Articles allow up to 50 references in the main text if needed and within the average page budget. Only one publication can be listed for each number. Additional references for Methods or Supplementary Information are not included in this count.

Only articles that have been published or accepted by a named publication, or that have been uploaded to a recognized preprint server (for example, arXiv, bioRxiv), should be in the reference list; papers in preparation should be mentioned in the text with a list of authors (or initials if any of the authors are co-authors of the present contribution).

Published conference abstracts, numbered patents, preprints on recognized servers, papers in press, and research datasets that have been assigned a digital object identifier may be included in reference lists, but text, grant details and acknowledgements may not. (An exception is the highlighted references which we ask authors of Reviews, Perspectives and Insights articles to provide.)

All authors should be included in reference lists unless there are more than five, in which case only the first author should be given, followed by ‘et al.’.

Please follow the style below in the published edition of Nature in preparing reference lists.

Authors should be listed surname first, followed by a comma and initials of given names.

Titles of all cited articles are required. Titles of articles cited in reference lists should be in upright, not italic text; the first word of the title is capitalized, the title written exactly as it appears in the work cited, ending with a full stop. Book titles are italic with all main words capitalized. Journal titles are italic and abbreviated according to common usage. Volume numbers are bold. The publisher and city of publication are required for books cited. (Refer to published papers in Nature for details.)

Research datasets may be cited in the reference list if they have been assigned digital object identifiers (DOIs) and include authors, title, publisher (repository name), identifier (DOI expressed as a URL). Example: Hao, Z., AghaKouchak, A., Nakhjiri, N. & Farahmand, A. Global Integrated Drought Monitoring and Prediction System (GIDMaPS) data sets. figshare http://dx.doi.org/10.6084/m9.figshare.853801 (2014).

Recognized preprints may be cited in the reference list. Example: Babichev, S. A., Ries, J. & Lvovsky, A. I. Quantum scissors: teleportation of single-mode optical states by means of a nonlocal single photon. Preprint at http://arXiv.org/quant-ph/0208066 (2002).

References to web-only journals should give authors, article title and journal name as above, followed by URL in full - or DOI if known - and the year of publication in parentheses.

References to websites should give authors if known, title of cited page, URL in full, and year of posting in parentheses.

End notes are brief and follow the Methods (or Methods References, if any).

Acknowledgements should be brief, and should not include thanks to anonymous referees and editors, inessential words, or effusive comments. A person can be thanked for assistance, not “excellent” assistance, or for comments, not “insightful” comments, for example. Acknowledgements can contain grant and contribution numbers.

Author Contributions: Authors are required to include a statement to specify the contributions of each co-author. The statement can be up to several sentences long, describing the tasks of individual authors referred to by their initials. See the authorship policy page for further explanation and examples.

Competing interests  statement.

Additional Information: Authors should include a set of statements at the end of the paper, in the following order:

Papers containing Supplementary Information contain the statement: “Supplementary Information is available for this paper.”

A sentence reading "Correspondence and requests for materials should be addressed to XX.” Nature expects this identified author to respond to readers’ enquiries and requests for materials, and to coordinate the handling of any other matters arising from the published contribution, including corrections complaints. The author named as corresponding author is not necessarily the senior author, and publication of this author’s name does not imply seniority. Authors may include more than one e-mail address if essential, in which event Nature will communicate with the first-listed address for any post-publication matters, and expect that author to coordinate with the other co-authors.

Peer review information includes the names of reviewers who agree to be cited and is completed by Nature staff during proofing.

A sentence reading “Reprints and permissions information is available at www.nature.com/reprints.”

Life sciences and behavioural & social sciences reporting guidelines

To improve the transparency of reporting and the reproducibility of published results, authors of life sciences and behavioural & social sciences Articles must provide a completed Reporting Summary that will be made available to editors and reviewers during manuscript assessment. The Reporting Summary will be published with all accepted manuscripts.

Please note: because of the advanced features used in these forms, you must use Adobe Reader to open the documents and fill them out.

Guidance and resources related to the use and reporting of statistics are available here .

Tables should each be presented on a separate page, portrait (not landscape) orientation, and upright on the page, not sideways.

Tables have a short, one-line title in bold text. Tables should be as small as possible. Bear in mind the size of a Nature page as a limiting factor when compiling a table.

Symbols and abbreviations are defined immediately below the table, followed by essential descriptive material as briefly as possible, all in double-spaced text.

Standard table formats are available for submissions of cryo-EM , NMR and X-ray crystallography data . Authors providing these data must use these standard tables and include them as Extended Data.

Figure legends

For initial submissions, we encourage authors to present the manuscript text and figures together in a single Word doc or PDF file, and for each figure legend to be presented together with its figure. However, when preparing the final paper to be accepted, we require figure legends to be listed one after the other, as part of the text document, separate from the figure files, and after the main reference list.

Each figure legend should begin with a brief title for the whole figure and continue with a short description of each panel and the symbols used. If the paper contains a Methods section, legends should not contain any details of methods. Legends should be fewer than 300 words each.

All error bars and statistics must be defined in the figure legend, as discussed above.

Nature requires figures in electronic format. Please ensure that all digital images comply with the Nature journals’ policy on image integrity .

Figures should be as small and simple as is compatible with clarity. The goal is for figures to be comprehensible to readers in other or related disciplines, and to assist their understanding of the paper. Unnecessary figures and parts (panels) of figures should be avoided: data presented in small tables or histograms, for instance, can generally be stated briefly in the text instead. Avoid unnecessary complexity, colouring and excessive detail.

Figures should not contain more than one panel unless the parts are logically connected; each panel of a multipart figure should be sized so that the whole figure can be reduced by the same amount and reproduced on the printed page at the smallest size at which essential details are visible. For guidance, Nature ’s standard figure sizes are 90 mm (single column) and 180 mm (double column) and the full depth of the page is 170 mm.

Amino-acid sequences should be printed in Courier (or other monospaced) font using the one-letter code in lines of 50 or 100 characters.

Authors describing chemical structures should use the Nature Research Chemical Structures style guide .

Some brief guidance for figure preparation:

Lettering in figures (labelling of axes and so on) should be in lower-case type, with the first letter capitalized and no full stop.

Units should have a single space between the number and the unit, and follow SI nomenclature or the nomenclature common to a particular field. Thousands should be separated by commas (1,000). Unusual units or abbreviations are defined in the legend.

Scale bars should be used rather than magnification factors.

Layering type directly over shaded or textured areas and using reversed type (white lettering on a coloured background) should be avoided where possible.

Where possible, text, including keys to symbols, should be provided in the legend rather than on the figure itself.

Figure quality

At initial submission, figures should be at good enough quality to be assessed by referees, preferably incorporated into the manuscript text in a single Word doc or PDF, although figures can be supplied separately as JPEGs if authors are unable to include them with the text. Authors are advised to follow the initial and revised submissions guidelines with respect to sizing, resolution and labelling.

Please note that print-publication quality figures are large and it is not helpful to upload them at the submission stage. Authors will be asked for high-quality figures when they are asked to submit the final version of their article for publication.At that stage, please prepare figures according to these guidelines .

Third party rights

Nature discourages the use or adaptation of previously published display items (for example, figures, tables, images, videos or text boxes). However, we recognize that to illustrate some concepts the use of published data is required and the reuse of previously published display items may be necessary. Please note that in these instances we might not be able to obtain the necessary rights for some images to be reused (as is, or adapted versions) in our articles. In such cases, we will contact you to discuss the sourcing of alternative material.

Figure costs

In order to help cover some of the additional cost of four-colour reproduction, Nature Portfolio charges our authors a fee for the printing of their colour figures. Please contact our offices for exact pricing and details. Inability to pay this charge will not prevent publication of colour figures judged essential by the editors, but this must be agreed with the editor prior to acceptance.

Production-quality figures

When a manuscript is accepted in principle for publication, the editor will ask for high-resolution figures. Do not submit publication-quality figures until asked to do so by an editor. At that stage, please prepare figures according to these guidelines .

Extended Data

Extended Data figures and tables are online-only (appearing in the online PDF and full-text HTML version of the paper), peer-reviewed display items that provide essential background to the Article but are not included in the printed version of the paper due to space constraints or being of interest only to a few specialists. A maximum of ten Extended Data display items (figures and tables) is typically permitted. See Composition of a Nature research paper .

Extended Data tables should be formatted along similar lines to tables appearing in print (see section 5.7) but the main body (excluding title and legend, which should be included at the end of the Word file) should be submitted separately as an image rather than as an editable format in Word, as Extended Data tables are not edited by Nature’s subediting department. Small tables may also be included as sub-panels within Extended Data figures. See Extended Data Formatting Guide .

Extended Data figures should be prepared along slightly different guidelines compared to figures appearing in print, and may be multi-panelled as long as they fit to size rules (see Extended Data Formatting Guide ). Extended Data figures are not edited or styled by Nature’s art department; for this reason, authors are requested to follow Nature style as closely as possible when preparing these figures. The legends for Extended Data figures should be prepared as for print figures and should be listed one after the other at the end of the Word file.

If space allows, Nature encourages authors to include a simple schematic, as a panel in an Extended Data figure, that summarizes the main finding of the paper, where appropriate (for example, to assist understanding of complex detail in cell, structural and molecular biology disciplines).

If a manuscript has Extended Data figures or tables, authors are asked to refer to discrete items at an appropriate place in the main text (for example, Extended Data Fig. 1 and Extended Data Table 1).

If further references are included in the Extended Data tables and Extended Data figure legends, the numbering should continue from the end of the last reference number in the main paper (or from the last reference number in the additional Methods section if present) and the list should be added to the end of the list accompanying the additional Methods section, if present, or added below the Extended Data legends if no additional Methods section is present.

Supplementary Information

Supplementary Information (SI) is online-only, peer-reviewed material that is essential background to the Article (for example, large data sets, methods, calculations), but which is too large or impractical, or of interest only to a few specialists, to justify inclusion in the printed version of the paper. See the Supplementary Information page for further details.

Supplementary Information should not contain figures (any figures additional to those appearing in print should be formatted as Extended Data figures). Tables may be included in Supplementary Information, but only if they are unsuitable for formatting as Extended Data tables (for example, tables containing large data sets or raw data that are best suited to Excel files).

If a manuscript has accompanying SI, either at submission or in response to an editor’s letter that requests it, authors are asked to refer to discrete items of the SI (for example, videos, tables) at an appropriate point in the main manuscript.

Chemical structures and characterization of chemical materials

For guidelines describing Nature ’s standards for experimental methods and the characterization of new compounds, please see the information sheet on the characterization of chemical materials .

We aim to produce chemical structures in a consistent format throughout our articles. Please use the Nature Portfolio Chemical Structures Guide and ChemDraw template to ensure that you prepare your figures in a format that will require minimal changes by our art and production teams. Submit final files at 100% as .cdx files.

Registered Reports

Registered Reports are empirical articles testing confirmatory hypotheses in which the methods and proposed analyses are pre-registered and peer reviewed prior to research being conducted. For further details about Registered Reports and instructions for how to submit such articles to Nature please consult our Registered Reports page.

All contributions should be submitted online , unless otherwise instructed by the editors. Please be sure to read the information on what to include in your cover letter as well as several important content-related issues when putting a submission together.

Before submitting, all contributors must agree to all of Nature's publication policies .

Nature authors must make data and materials publicly available upon publication. This includes deposition of data into the relevant databases and arranging for them to be publicly released by the online publication date (not after). A description of our initiative to improve the transparency and the reproducibility of published results is available here . A full description of Nature’s publication policies is at the Nature Portfolio Authors and Referees website .

Other Nature Research journals

An account of the relationship between all the Nature journals is provided at the Nature family page . 

Quick links

• Explore articles by subject
• Guide to authors
• Editorial policies

What’s Included: The Dissertation Template

If you’re preparing to write your dissertation, thesis or research project, our free dissertation template is the perfect starting point. In the template, we cover every section step by step, with clear, straightforward explanations and examples .

The template’s structure is based on the tried and trusted best-practice format for formal academic research projects such as dissertations and theses. The template structure reflects the overall research process, ensuring your dissertation or thesis will have a smooth, logical flow from chapter to chapter.

The dissertation template covers the following core sections:

• The title page/cover page
• Abstract (sometimes also called the executive summary)
• Table of contents
• List of figures /list of tables
• Chapter 1: Introduction  (also available: in-depth introduction template )
• Chapter 2: Literature review  (also available: in-depth LR template )
• Chapter 3: Methodology (also available: in-depth methodology template )
• Chapter 4: Research findings /results (also available: results template )
• Chapter 5: Discussion /analysis of findings (also available: discussion template )
• Chapter 6: Conclusion (also available: in-depth conclusion template )
• Reference list

Each section is explained in plain, straightforward language , followed by an overview of the key elements that you need to cover within each section. We’ve also included practical examples to help you understand exactly what’s required in each section.

The cleanly-formatted Google Doc can be downloaded as a fully editable MS Word Document (DOCX format), so you can use it as-is or convert it to LaTeX.

FAQs: Dissertation Template

What format is the template (doc, pdf, ppt, etc.).

The dissertation template is provided as a Google Doc. You can download it in MS Word format or make a copy to your Google Drive. You’re also welcome to convert it to whatever format works best for you, such as LaTeX or PDF.

What types of dissertations/theses can this template be used for?

The template follows the standard best-practice structure for formal academic research projects such as dissertations or theses, so it is suitable for the vast majority of degrees, particularly those within the sciences.

Some universities may have some additional requirements, but these are typically minor, with the core structure remaining the same. Therefore, it’s always a good idea to double-check your university’s requirements before you finalise your structure.

Will this work for a research paper?

A research paper follows a similar format, but there are a few differences. You can find our research paper template here .

Is this template for an undergrad, Masters or PhD-level thesis?

This template can be used for a dissertation, thesis or research project at any level of study. It may be slight overkill for an undergraduate-level study, but it certainly won’t be missing anything.

How long should my dissertation/thesis be?

This depends entirely on your university’s specific requirements, so it’s best to check with them. As a general ballpark, Masters-level projects are usually 15,000 – 20,000 words in length, while Doctoral-level projects are often in excess of 60,000 words.

What about the research proposal?

If you’re still working on your research proposal, we’ve got a template for that here .

We’ve also got loads of proposal-related guides and videos over on the Grad Coach blog .

How do I write a literature review?

We have a wealth of free resources on the Grad Coach Blog that unpack how to write a literature review from scratch. You can check out the literature review section of the blog here.

How do I create a research methodology?

We have a wealth of free resources on the Grad Coach Blog that unpack research methodology, both qualitative and quantitative. You can check out the methodology section of the blog here.

Can I share this dissertation template with my friends/colleagues?

Yes, you’re welcome to share this template. If you want to post about it on your blog or social media, all we ask is that you reference this page as your source.

Can Grad Coach help me with my dissertation/thesis?

Within the template, you’ll find plain-language explanations of each section, which should give you a fair amount of guidance. However, you’re also welcome to consider our dissertation and thesis coaching services .

Find Info For

• Current Students
• Prospective Students
• Alumni and Friends
• Engage with Purdue
• Research and Innovation

Quick Links

• Departmental Format Advisors
• iThenticate Requests
• Copyright and Your Thesis
• Editing, Proofreading, and Translation Services
• Deposit Requirements
• Request a Consultation
• Deadlines  
• Thesis & Dissertation Office

The templates below have been built to ensure a consistent look among most theses and dissertations submitted to the Graduate School. These templates should be used as a guide in formatting your thesis or dissertation with the understanding that your department may require modifications of the template to fit your discipline’s style. Please contact your department’s Format Advisor to discuss any necessary changes.

The Thesis & Dissertation Office recommends using the PurdueThesis.cls file.

Please take note that Overleaf SHOULD NOT be used for writing, editing, or publishing documents or research papers that contain data subject to EAR, ITAR, DFARS Clause 252.204-7012, and other controlled data designators due to the increased security required for these types of data.

Get PurdueThesis

Sign up for your FREE Overleaf  Pro+ account today and access the PurdueThesis.cls!

Please download one of the following templates to begin your thesis/dissertation. Formatting within each template is already set up for your convenience. Be sure to paste your Word document INTO the template. Otherwise, it can cause formatting issues.

You will need to select the appropriate answer for all dropdown boxes on page 1.  Ex. Thesis/Dissertation, Choose Degree, Choose Department, Choose Campus Location, Choose Graduation Term.

You will need to manually input your committee information on page 2. We ask that you only list your committee member's primary department. The name after "Approved by:" should match the name listed on your Form 9 as "Thesis Form Head".

Follow instructions within the template to complete the rest of your thesis/dissertation. Please be careful when making changes so that you do not override/change the template formatting.

Please contact us if your department is not listed, or with other questions. 

Last modified June 24, 2024.

Communication

• OneCampus Portal
• Brightspace
• BoilerConnect
• Faculty and Staff
• Human Resources
• Colleges and Schools
• Find Workshops
• Funding Support
• Purdue Graduate Student Government
• Purdue Graduate Student Center
• Data Requests
• Staff Directory
• OGSPS Toolkit
• Catalogs, Manuals, Policies
• Report a Concern
• Publications

Ernest C. Young Hall, Room 170 | 155  S. Grant Street, West Lafayette, IN 47907-2114 | 765-494-2600

Contact OGSPS at [email protected] for accessibility issues with this page.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on February 28, 2019 by Shona McCombes . Revised on July 18, 2023 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a thesis ,  dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, other interesting articles, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the US during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book or research proposal
• Applying for research grants

It’s easiest to write your abstract last, right before the proofreading stage, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your dissertation topic , but don’t go into detailed background information. If your abstract uses specialized terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyze,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Don't submit your assignments before you do this

The academic proofreading tool has been trained on 1000s of academic texts. Making it the most accurate and reliable proofreading tool for students. Free citation check included.

Try for free

Next, summarize the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalizability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarize the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services or use the paraphrasing tool .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Anchoring bias
• Halo effect
• The Baader–Meinhof phenomenon
• The placebo effect
• Nonresponse bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarizes the contents of your paper.

An abstract for a thesis or dissertation is usually around 200–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis , dissertation or research paper .

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page in the thesis or dissertation , after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

McCombes, S. (2023, July 18). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved June 24, 2024, from https://www.scribbr.com/dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, shorten your abstract or summary, how to write a literature review | guide, examples, & templates, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”